Uniaxial deformation and orientation of ethylene–tetrafluoroethylene films

This study concerns the thermal and mechanical response of several commercial grades of ethylene – tetrafluoroethylene copolymer films. Differential scanning calorimetry was used to show that, although films have similar degrees of crystallinity and melting temperature, the melting endotherms and crystallisation exotherms differ between materials, suggesting small changes in composition between manufacturers. Films were deformed in tension at a range of temperatures and rates. Selected films were unloaded immediately after stretching, and measurement of the elastic recovery highlighted further differences between materials. Batches of films were pre-drawn uniaxially above the glass transition and immediately quenched. When these materials were subsequently re-drawn below the glass transition temperature, most of them exhibited much improved yield stress, modulus and tensile strength (improving by factors of 5, 5 and 4, respectively at a draw ratio of 3), but a reduced strain to failure. In most of the films, the pre-drawing, as well as the initial orientation of the films, is accounted for by a simple shift in the true strain axis. This is indicative of a material response dominated by entropic network stretch. It also suggests that, in the cases where strain superposition does not work, a different arrangement of crystalline lamellae may be present, limiting the extent to which improved properties can be achieved in some materials.     

Inflammasome Activation of IL-1 Family Mediators in Response to Cutaneous Photodamage(†)

Although keratinocytes are relatively resistant to ultraviolet radiation (UVR) induced damage, repeated UVR exposure result in accumulated DNA mutations that can lead to epidermal malignancies. Keratinocytes play a central role in elaborating innate responses that lead to inflammation and influence the generation of adaptive immune responses in skin. Apart from the minor cellular constituents of the epidermis, specifically Langerhans cells and melanocytes, keratinocytes are the major source of cytokines. UVR exposure stimulates keratinocytes to secrete abundant pro-inflammatory IL-1-family proteins, IL-1α, IL-1β, IL-18, and IL-33. Normal skin contains only low levels of inactive precursor forms of IL-1β and IL-18, which require caspase 1-mediated proteolysis for their maturation and secretion. However, caspase-1 activation is not constitutive, but dependents on the UV-induced formation of an active inflammasome complex. IL-1 family cytokines can induce a secondary cascade of mediators and cytokines from keratinocytes and other cells resulting in wide range of innate processes including infiltration of inflammatory leukocytes, induction of immunosuppression, DNA repair or apoptosis. Thus, the ability of keratinocytes to produce a wide repertoire of proinflammatory cytokines can influence the immune response locally as well as systematically, and alter the host response to photodamaged cells. We will highlight differential roles played by each IL-1 family molecule generated by UV-damaged keratinocytes, and reveal their complementary influences in modulating acute inflammatory and immunological events that follow cutaneous UV exposure.     

Pinned films and capillary hysteresis in microfluidic channels

Pinned water films in a microfluidic channel act as elastic membranes under tension that increase capillary pressures while preserving the mechanical work dissipated around capillary pressure-saturation, P(c)-S(w), hysteresis cycles. High-resolution two-photon laser micromachining of SU-8 photoresist was used to fabricate wedge-shaped microfluidic channels that included sharp edge features to pin wetting films during drainage. The films were measured using confocal fluorescence microscopy. The tension in the film acts as an elastic tether that shifts the P(c)-S(w) hysteresis cycle higher in pressure relative to the hysteresis cycle in the same sample when films are not pinned. The film tension is strongly nonlinear as the restoring force decreases with increasing displacement. The contribution of elastic forces to hysteresis has important consequences for pressure and saturation control in microfluidics.     

Intramolecular Direct Dehydrohalide Coupling Promoted by KO(t)Bu: Total Synthesis of Amaryllidaceae Alkaloids Anhydrolycorinone and Oxoassoanine

A transition-metal-free intramolecular dehydrohalide coupling via intramolecular homolytic aromatic substitution (HAS) with aryl radicals has been developed in the presence of potassium tert-butoxide and an organic molecule as the catalyst. The methodology has been applied to a concise synthesis of Amaryllidaceae alkaloids viz. oxoassoanine (1b), anhydrolycorinone (1d), and other related structures. Interestingly, the method also works only in the presence of potassium tert-butoxide.     

Further investigating the determination of phosphorus in plants by INAA using<Emphasis Type="Italic"> bremsstrahlung</Emphasis> measurement

Phosphorus is an essential element for plants and animals, playing a fundamental role in the production of biochemical energy. Despite its relevance, phosphorus is not commonly determined by instrumental neutron activation analysis (INAA), because ³²P does not emit gamma-rays in its decay. There are alternative methods for the determination of phosphorus by INAA, such as the use of beta counting or the measurement of bremsstrahlung originated from the high energy beta particle from ³²P. Here the determination of phosphorus in plant materials by measuring the bremsstrahlung production was further investigated, to optimize an analytical protocol for minimizing interferences and overcoming the poor specificity. Eight certified reference materials of plant matrices with phosphorus ranging between 171 and 5,180 mg kg⁻¹ were irradiated at a thermal neutron flux of 9.5 × 10¹² cm⁻² s⁻¹ and measured with a HPGe detector at decay times varying from 7 to 60 days. Phosphorus solutions added to a certified reference material at three levels were used for calibration. Counts accumulated in the baseline at four different regions of the gamma-ray spectra were tested for the determination of phosphorus, with better results for the 100 keV region. The Compton scattering contribution in the selected range was discounted using an experimental peak-to-Compton factor and the net areas of all peaks in the spectra with energies higher than 218 keV, i.e. Compton edge above 100 keV. Amongst the interferences investigated, the production of ³²P from sulfur, and the contribution of Compton scattering should be considered for producing good results.     

Neutron activation analysis for assessing chemical composition of dry dog foods

Brazil holds the second largest population of domestic dogs in the world, with 33 million dogs, only behind the United States. The annual consumption of dog food in the country is 1.75 million tons, corresponding to the World’s sixth in trade turnover. Dog food is supposed to be a complete and balanced diet, formulated with high quality ingredients. All nutrients and minerals required for an adequate nutrition of dogs are added to the formulation to ensure longevity and welfare. In this context, the present study aimed at assessing the chemical composition of dry dog foods commercialized in Brazil. Thirty-four samples were acquired in the local market of Piracicaba and analyzed by instrumental neutron activation analysis (INAA) to determine the elements As, Br, Ca, Co, Cr, Cs, Fe, K, La, Na, Rb, Sb, Sc, Se, U, and Zn. In general, the concentrations of Ca, Fe, K, Na, and Zn complied with the values required by the Association of American Feed Control Officials (AAFCO). To evaluate the safety of dog food commercialized in Brazil, further investigation is necessary to better understand the presence of toxic elements found in this study, i.e. Sb and U. INAA was useful for the screening analysis of different types and brands of dry dog foods for the determination of both essential and toxic elements.     

Ca and Mg determination from inhabitants of Brazil using neutron activation analysis

In this study the neutron activation analysis (NAA) technique was applied to determine Ca and Mg in whole blood from inhabitants of Brazil for the purpose of establishing concentration ranges indicative of sex and age. The initiative to perform these measurements is related to the increase in heart disease. According to recent statistics from WHO, the average is one death due to heart attack in Brazil, every five minutes. The measures were performed considering lifestyle factors (non-smokers, non-drinkers and no history of toxicological exposure) of Brazilian inhabitants. A healthy group constituted of male (n = 94) and female (n = 84) blood donors, ages between 18 and 70 years and above 50 kg, was selected from the blood banks and hematological laboratories of Brazil. The influence of sex was also investigated considering several age ranges (18–29, 30–40, 41–50, >50 years). The results show significant differences when a comparison is made by sex and age and may be useful to identify or prevent clinical diseases. These results emphasize the need to perform periodic evaluation of Ca and Mg in blood.     

Electrospinning of Hyperbranched Poly-L-Lysine/Polyaniline Nanofibers for Application in Cardiac Tissue Engineering

Electrospun polyaniline nanofibers are one of the most promising materials for cardiac tissue engineering due to their tunable electroactive properties. Moreover, the biocompatibility of polyaniline nanofibes can be improved by grafting of adhesive peptides during the synthesis. In this paper, we describe the biocompatible properties and cardiomyocytes proliferation on polyaniline electrospun nanofibers modified by hyperbranched poly-L-lysine dendrimers (HPLys). The microstructure characterization of the HPLys/polyaniline nanofibers was carried out by scanning electron microscopy (SEM). It was observed that the application of electrical current stimulates the differentiation of cardiac cells cultured on the nanofiber scaffolds. Both electroactivity and biocompatibility of the HPLys based nanofibers suggest the use this material for culture of cardiac cells and opens the possibility of using this material as a biocompatible electroactive 3-D matrix in cardiac tissue engineering.     

Tautomerism of Diisopropoxyphosphoryl Benzylisothiourea

Abstract

As part of our studies in preparation and physical properties of Potential ligands containing l-phosphoryl(P?O)-3-3-carbonyI(C?X, X?NH, O or S) group, we have investigated the intrdinta molecular hydrogen bonding of diisoproxy- phosphorylquanidine[l] as well as the tautomerism of phosphoryl benzylisothiourea. These are of interest as in interpretation of their chelation behavior as well as in development of other potential ligands for specific metal cations.     

An electrochemical immunosensor for ochratoxin A determination in wines based on a monoclonal antibody and paramagnetic microbeads

We report a direct competitive immunosensor for the rapid determination of ochratoxin A (OTA) in wine samples. Magnetic beads (1 ± 0.5 μm diameter) covered with streptavidin were functionalized with a monoclonal antibody against OTA, and then left to incubate in a solution of tracer (ochratoxin conjugated to the enzyme peroxidase) and a range of OTA concentrations (10(-4) to 1,000 ng mL(-1)). After washing and separation steps helped with a magnetic field, a volume of the dispersion was put on screen-printed electrodes under a magnet, and after adding the substrate the p-benzoquinone generated enzymatically was detected by differential-pulse voltammetry. Wine samples (2 mL) were easily prepared simply by adjusting to pH = 7.5 with diluted NaOH and by adding polyvinylpyrrolidone for complexing polyphenols, without any other clean-up or preconcentration steps. The limit of detection for detecting OTA in wines was of 0.11 ± 0.01 ng L(-1), well below the permitted content of the mycotoxin by the European Union (<2 ng mL(-1)). Spiked wines were subjected to immunosensor calibrations to study the matrix effects. OTA concentrations measured with the immunosensor were compared with those obtained by high-performance liquid chromatography coupled to fluorescence detection (AOAC official method 2001.01). The OTA levels from two red wines of "Campo de Borja", Spain, ranged from about 0.027 to 0.033 ng mL(-1) of OTA.