Optical and Thermal Stability of Oligofluorene/Rubber Luminescent Blend

This paper proposes to obtain homogeneous and stable blends of oligo(9,9-dioctylfluorene)-co-phenylene (OF), a conjugated oligomer with strong tendency of formation of excimers in the solid state, and nitrile rubber (NBR). This rubber protection reduces the formation of polymer excimers in the films. The fluorene oligomer was synthesized via Suzuki reaction and incorporated in the nitrile rubber. The films were formed by spin coating and casting techniques on the proportions of 1, 5, 10, 20 and 50 % (w/w) of OF in the nitrile rubber (NBR). The structural, optical and thermal properties of the films were evaluated with infrared, UV–Vis, fluorescence and thermogravimetry, respectively. The nitrile rubber proved to be essential for the preparation of homogeneous and stable films, since it was not possible to obtain films with only fluorene using the above-mentioned techniques. Furthermore, luminescent properties of OF are unchanged and the excimers formation in the solid state decrease suggesting the efficiency of nitrile rubber as the matrix for making films.     

The certification of SRM 1546 – Meat Homogenate, a new reference material for nutrients in a high protein, high fat matrix

In response to reference material needs expressed by the food industry and government regulators, the National Institute of Standards and Technology (NIST) has developed a new Standard Reference Material (SRM) consisting of a canned meat product with certified and reference values for a large number of constituents. SRM 1546 Meat Homogenate consists of a mixture of finely ground pork and chicken prepared and canned by a commercial process. NIST determined the concentration levels of cholesterol, sodium, calcium, iron, and seven fatty acids in this SRM using well defined methods and procedures. These analytes as well as 34 other constituents or properties were determined in an interlaboratory comparison exercise involving 21 laboratories, most of which are associated with the National Food Processors Association (NFPA) Food Industry Analytical Chemists Subcommittee (FIACS). From statistical analysis of the data, NIST assigned certified concentrations for the eleven analytes measured at NIST and reference concentrations for the proximates, six additional fatty acids, seven minerals, and seven water-soluble vitamins. Information values without uncertainties are provided for the concentrations of six additional constituents for which the uncertainties could not adequately be assessed. SRM 1546 will provide laboratories with a means to evaluate the accuracy of the methods they use to assign nutrient levels to processed meats and similar products. Received: 11 October 2000 / Revised: 15 December 2000 / Accepted: 21 December 2000     

Enantioselective approach to indolizidine and quinolizidine scaffolds. Application to the synthesis of peptide mimics

An enantioselective approach to substituted indolizidine and quinolizidine frameworks has been developed. Key steps of the synthesis are the enantioselective, palladium-catalyzed N-allylation of an imide, the nucleophilic allylation of an acyliminium ion and a ring closing metathesis. This general strategy has been applied to the synthesis of indolizidine peptide mimics, starting from a chiral imide derived from l-aspartic acid. It was observed that the preexisting stereogenic center of this substrate has a moderate influence on the stereoselectivity of the electrophilic allylation, which is mainly determined by the sense of chirality of the catalyst.     

Crystal structure of dicyclohexano-18-crown-6 potassium 2-nitrophenoxide

The first crystal structure of a potassium cation complex with dicyclohexano-18-crown-6 is reported. The potassium 2-nitrophenoxide complex ofsyn-cis-syn dicyclohexano-18-crown-6 crystallizes in the triclinic space group P with cell constantsa=8.604(2),b=10.772(4),C=16.123(5)Å, =73.86(3)°,=77.61(3)°, =82.68(3)° andZ=2 forD _c =1.31 g cm^–3. Least-squares refinement based on 2742 observed reflections led to a final conventionalR value of 0.040. Dicyclohexano-18-crown-6 has the shape of a saddle with the potassium cation sitting at the saddlepoint. The structure of the 2-nitrophenoxide anion is dominanted by the quinoid resonance contributor. Because the complex is devoid of significant intercomplex interactions, it is a prototypical 1:1:1 complex. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82043 (26 pages).Now Mrs. K. M. Balo.     

Photophysical study of naphthalenophanes: evidence of adduct formation with molecular oxygen

The photophysical properties of two atropisomeric naphthalenophanes (1 and 2) have been studied. Their structure only differs in the relative arrangement, syn (1) or anti (2), of the two aromatic units. The compounds emission is mainly excimeric and is strongly quenched in the presence of oxygen. Comparison of emission intensities obtained from steady state and from decay times provides clear evidence of the formation of ground state charge transfer complexes between oxygen and the naphthalenophanes 1 and 2. The calculated values for the association constants are on the order of 10(3) M(-1) (ethanol, room temperature) for both naphthalenophanes.     

Fast analysis of amino acids in wine by capillary electrophoresis with laser-induced fluorescence detection

A fast analytical method has been developed for the determination of nine amino acids, together with serotonin, in wine samples of different origin and vintage. The method is based on capillary electrophoresis coupled to laser-induced fluorescence detection. Separation was obtained by using a fused-silica capillary (75?μm id, 74.0?cm total length, 60.0?cm length to detector) and a background electrolyte composed of carbonate buffer (20?mM, pH 9.2), applying a 20?kV voltage. Direct hydrodynamic injection of wine samples was made after an original microwave-assisted derivatisation step with 5-(4,6-dichlorotriazinyl)aminofluorescein. Fluorescence was induced by an Ar-Ion laser, exciting at 488?nm. Good linearity (r(2) >0.9990) was obtained for all considered analytes and sensitivity was also good, with limits of detection in the 7-50?ng/mL range. The method was successfully applied for the analysis of commercial Italian wines and thus seems to be suitable for the determination of the relevant amino acids and serotonin, providing good results in terms of accuracy and precision, together with the advantage of a very fast, microwave-assisted derivatisation procedure. Future applications of the method are planned to check for wine adulterations and commercial frauds.     

Modeling intercalation through the sandwich‐type interactions between benzene and 14 polyaromatic molecules: DFT and ab initio results

We use second order Moller Plesset perturbation theory and several density functional theory methods to calculate the counterpoise corrected electronic interaction energies between benzene and a series of polyaromatic molecules. These systems serve as a simple model for DNA intercalation. We show that addition of nitrogen atoms to the polyaromatic molecules always increases sandwich‐type interactions, and that, of the density functional theory methods studied, only SVWN can mimic the interaction energies and optimal separations obtained with perturbation theory. SVWN reproduces the optimal molecular distances obtained with perturbation theory very well, and often comes within less than 10% of the interaction energy. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2008     

Determination of elements in kidney,serum and urine of Wistar rats with Acute Renal Insufficiency using NAA

In this investigation ions in serum, urine and kidney of Wistar rats (control group) and Wistar with Acute Renal Insufficiency (ARI) were quantified using instrumental neutron activation analysis. The measurements in serum and urine were performed before, during and after ischemia-induced ARI. The measurements in kidney were performed for the control and ARI groups. Also, a comparative analysis between the concentration ratios before, during and after ARI was performed in urine and serum samples for both groups. The variations results for Cu in serum and I in urine, before and after ischemia-induced ARI, suggest that these elements must be also investigated in renal dysfunction.     

Rossinone-related meroterpenes from the Antarctic ascidian Aplidium fuegiense

The chemical analysis of the ascidian Aplidium fuegiense resulted in the isolation of three novel meroterpenoids 2–4, structurally related to the main co-occurring known rossinone B (1). The structures of the new compounds were determined by interpretation of spectroscopic data. Compounds 1–4 were found to be selectively localized in the viscera of the ascidian.     

Determination of musk fragrances in sewage sludge by pressurized liquid extraction coupled to automated ionic liquid‐based headspace single‐drop microextraction followed by GC‐MS/MS

A method for the quantitative determination of ten musk fragrances extensively used in personal care products from sewage sludge was developed by using a pressurized liquid extraction (PLE) followed by an automated ionic liquid‐based headspace single‐drop microextraction and gas chromatography‐tandem mass spectrometry. The influence of main factors on the efficiency of PLE was studied. For all musks, the highest recovery values were achieved using 1 g of pretreated sewage sludge, H₂O/methanol (1:1) as an extraction solvent, a temperature of 80°C, a pressure of 1500 psi, an extraction time of 5 min, 2 cycles, a 100% flush volume, a purge time of 120 s, and 1 g Florisil as in‐cell clean‐up extraction sorbent. The use and optimization of an in‐cell clean‐up sorbent was necessary to remove fatty interferents of the PLE extract that make the subsequent ionic liquid‐based headspace single‐drop microextraction difficult. Validation parameters, namely LODs and LOQs, ranged from 0.5–1.5 to 2.5–5 ng/g, respectively. Good levels of intra‐ and interday repeatabilities were obtained analyzing sewage sludge samples spiked at 10 ng/g (n = 3, RSDs < 10%). The method applicability was tested with sewage sludge from different wastewater treatment plants. The analysis revealed the presence of all the polycyclic musks studied at concentrations higher than the LOQs, ranging from 6 to 530 ng/g. However, the nitro musk concentrations were below the LOQs or, in the case of musk xylene, was not detected.