Energy Recovery from Municipal Solid Waste in Small Communities

The heating values of municipal solid waste generated in three towns with a population of less than 50 000, situated in Galicia (Spain), were measured with a static bomb calorimeter. Samples of raw refuse were burnt either as received or after sorting of the different combustible components. A study was made of samples from controlled and uncontrolled landfills. The calorific values were compared with those corresponding to a commercial residual derived fuel in order to study the possibility of using municipal solid waste as a source of recovered energy. This revised version was published online in July 2006 with corrections to the Cover Date.     

thermal stability of epoxy systems badge (n=0)/1,2-dch and badge (n=0)/ 1,2-dch/vinylcyclohexene dioxide

The thermal degradation of the epoxy system diglycidyl ether of bisphenol A (BADGE n=0)/1,2-diamine cyclohexane (DCH) containing different concentrations of an epoxy reactive diluent was studied by thermogravimetric analysis in order to determine the reaction mechanism of the degradation process and to compare it with the results for the same system without diluent. The value of the activation energy, necessary for this study, was calculated using various integral and differential methods. Values obtained using the different methods were compared to the value obtained by the Flynn-Wall-Ozawa"s method (between 193-240 kJ mol^-1 depending on the diluent concentration) with does not require a knowledge of the nth order reaction mechanism. All the experimental results were compared to master curves in the range of Doyle"s approximation (20-35% of conversion). Analysis of the results suggests that the reaction mechanism could be F₂, F₃, or A₂ type. This revised version was published online in July 2006 with corrections to the Cover Date.     

Condensed rare-earth metal-rich tellurides. Extension of layered Sc6PdTe2-type compounds to yttrium and lutetium analogues and to Y7Te2, the limiting binary member

Six isotypic R₆ZTe₂ phases have been synthesized in Ta at elevated temperatures and characterized by single crystal X-ray refinements for R=Y, Z=Rh, Pd, Ag, Y and for R=Lu, Z=Cu, Ag. All crystallize in the Sc₆PdTe₂-type structure, Pnma, Z=4, a∼21.5 Å, b∼4.1 Å, c∼11.4 Å. The results can be viewed as the replacement of Te3 atoms in the parent isotypic Sc₂Te (or in the hypothetical Y₂Te or Lu₂Te analogues) by the above the Z, the Y example giving the new binary phase Y₇Te₂. The shorter (and stronger) metal-metal bonds concentrate in the region of metal (Z, Y) substitution, as revealed by larger integrated crystal orbital Hamilton population (ICOHP) values derived from linear muffin-tin-orbital (LMTO) calculations. Partial densities-of-states data for Y₇Te₂ reflect a similar behavior. Individual R-R bond distances are seen to deviate appreciably from the more fundamental overlap population measures for each.     

Gas-phase structure of protonated histidine and histidine methyl ester: combined experimental mass spectrometry and theoretical ab initio study

Gas-phase H/D exchange experiments with CD3OD and D2O and quantum chemical ab initio G3(MP2) calculations were carried out on protonated histidine and protonated histidine methyl ester in order to elucidate their bonding and structure. The H/D exchange experiments show that both ions have three equivalent fast hydrogens and one appreciably slower exchangeable hydrogen assigned to the protonated amino group participating in a strong intramolecular hydrogen bond (IHB) with the nearest N(sp2) nitrogen of the imidazole fragment and to the distal ring NH-group, respectively. It is taken for granted that the proton exchange in the IHB is much faster than the H/D exchange. Unlike in other protonated amino acids (glycine, proline, phenylalanine, tyrosine, and tryptophan) studied earlier, the exchange rate of the carboxyl group in protonated histidine is slower than that of the amino group. The most stable conformers and the enthalpies of neutral and protonated histidine and its methyl ester are calculated at the G3(MP2) level of theory. It is shown that strong intramolecular hydrogen bonding between the amino group and the imidazole ring nitrogen sites is responsible for the stability and specific properties of the protonated histidine. It is found that the proton fluctuates between the amino and imidazole groups in the protonated form across an almost vanishing barrier. Proton affinity (PA) of histidine calculated by the G3(MP2) method is 233.2 and 232.4 kcal mol(-1) for protonation at the imidazole ring and at the amino group nitrogens, respectively, which is about 3-5 kcal mol(-1) lower than the reported experimental value.     

Reversal of stereoselectivity in [5 + 2] pyrone--alkene cycloadditons using a sulfoxide-to-sulfoximine switch. Enantiodivergent synthesis of 8-oxabicyclo[3.2.1]octane systems

[reaction: see text] Switching from a sulfinyl to a sulfonimidoyl group allows the reversal of the sense of asymmetric induction in thermal [5C + 2C] intramolecular pyrone-alkene cycloadditions. Removal of the sulfoximine unit from the resulting cycloadducts yields optically active oxabicyclic systems that are enantiomeric to those obtained using the sulfinyl chiral auxiliary.     

Qualitative and quantitative sensitivity in flame photometry

Concepts of sensitivity in flame photometry are discussed. A distinction is made between sensitivity itself, concentration limits and dilution limits applied to qualitative and quantitative analysis by flame photometry. Sensitivity values, as well as the concentration limits, are considered from two different aspects: as a function of the slope of calibration curves-percentual values-and as a function of fluctutions-fluctuational values. The concepts are applied to the two main branches of flame photometry, emission and absorption.     

Dip-pen nanolithography in tapping mode

Dip-pen nanolithography (DPN) is becoming a popular nano-patterning technique for depositing materials onto a substrate using the probe of an atomic force microscope (AFM). Here, we demonstrate the deposition of a short synthetic peptide by DPN using the Tapping Mode of AFM rather than the commonly used contact mode. DPN in Tapping Mode requires drive amplitude modifications for deposition, yet allows for gentle imaging of the deposited material and enables deposition on soft surfaces.     

The reaction of N-aminophthalimide with isothiocyanates

N-Aminophthalimide ( I ) reacted in refluxing isopropyl alcohol with a number of isothiocyanates to give the related 1:1 addition products, N-(3-substitutedthioureido)phthalimides III. On the other hand, heating I directly with an excess of neat arylisothiocyanates produced the N-arylphthalimides IV. As shown for IIIa, the 1:1 addition products are conveniently deblocked by the Ing-Manske procedure to yield the 4-substituted thiosemicarbazide.     

Molecular emission cavity analysis: Part 21. Effect of Phosphoric Acid on the Determination of Sulphate

Phosphoric acid at levels above 10^-3 M depresses the S₂ emission from sulphate, but concentrations up to 0.1 M may be necessary to eliminate cationic interferences.     

An Improved HPLC Post-Column Methodology for the Identification of Free Radical Scavenging Phytochemicals in Complex Mixtures

The importance of natural antioxidants principally relates to their health-promoting properties. The discovery of new sources of established compounds or more potent compounds is a costly exercise and any technique capable of aiding this procedure would be highly significant. An approach combining chromatographic separation, component analysis and post-column identification of free radical scavenging has been reported. However, its effectiveness is dependent upon various factors and the number of samples analyzed without operator intervention is restricted. A more applicable technique using a 10% to 100% methanol with 2% acetic acid mobile phase and a citric acid-sodium citrate buffered methanolic 1,1-diphenyl-2-picrylhydrazyl free radical reagent is presented, whereby free radical scavengers can be detected within crude extracts of variable polarity without special considerations. As an illustration, acetone, 70% (aq.) methanol and acetonitrile-soluble extracts were prepared from sage (Salvia officinalis L.) for extraction of polar and non-polar radical scavengers and analyzed. Radical scavenging components were identified as carnosic, caffeic and rosmarinic acids and luteolin-7-O-glycoside. Others radical scavengers were tentatively identified as benzoic and hydroxycinnamic acid derivatives, flavonoids and diterpenoids. Through the application of this technique, carnosic acid and rosmarinic acid were identified as the principal free radical scavengers.