Alcohol sensing membrane based on immobilized ruthenium(II) complex in carboxylated PVC and surface covalently bonded alcohol oxidase

Alcohol sensing membranes coated on overhead transparency films for the continuous monitoring of ethanol, propanol and butanol are presented. Alcohol oxidation catalyzed by alcohol oxidase in conjunction with the fluorescence quenching reaction of oxygen-sensitive dye ion-pair, tris(4,7-diphenyl-1,10-phenanthroline) ruthenium(II) didodecylsulphate was chosen for the determination. Alcohol oxidase was immobilized covalently on a plasticized carboxylated poly(vinyl chloride) membrane and the oxygen-sensitive dye ion-pair was entrapped in the same membrane. The sensing membrane relates oxygen consumption, as a result of enzymatic oxidation, to alcohol concentration. Measurements have been performed in air-saturated alcohol standard solutions of pH 7.0. Storage stability, reproducibility and the effect of pH on sensing membrane performance have been studied in detail. The alcohol sensing membrane proposed here is simple to prepare and has a fairly rapid response time of <1 min. It has been successfully applied to the determination of the ethanol contents in various spirits.     

Ultrathin polymer film formation by collision-induced cross-linking of adsorbed organic molecules with hyperthermal protons

A new synthetic approach for the formation of ultrathin polymer films with customizable properties was developed. In this approach, the kinematic nature of proton collisions with simple organic molecules condensed on a substrate is exploited to break C-H bonds preferentially. The subsequent recombination of carbon radicals gives a cross-linked polymer thin film, and the selectivity of C-H cleavage preserves the chemical functionalities of the precursor molecules. The nature and validity of the method are exemplified with theoretical results from ab initio molecular dynamics calculations and experimental evidence from a variety of characterization techniques. Its applicability is demonstrated by the synthesis of ultrathin polymer films with precursor molecules such as dotriacontane, docosanoic acid, poly(acrylic acid) oligomer, and polyisoprene. The approach is fundamentally different from conventional chemical synthesis as it involves an unusual mix of physical and chemical processes including charge exchange, projectile penetration, kinematics, collision-induced dissociation, inelastic energy transfer, chain transfer, and chain cross-linking.     

Polymerization behavior of 2,2,6,6-tetramethylpiperidinyl methacrylate: A monomer carrying a hindered amine group

Copolymers of 2,2,6,6-tetramethylpiperidinyl methacrylate (TPMA) with styrene (S) and with methyl methacrylate (MMA) were synthesized using AIBN as initiator. S–TPMA copolymers from feed ranging from 0.10–0.80 mole fractions TPMA and MMA-TPMA copolymers from feed of 0.04–0.85 mole fractions TPMA were used in the determination of monomer reactivity ratios r₁, r₂. Four different methods were employed in the calculations of r₁ and r₂ and all calculated results were in good agreement with each other. The structure of S–TPMA copolymers was inferred to be of an alternating nature while that of MMA–TPMA copolymers was random. Both copolymers are potential hindered amine light stabilizers (HALS) and are expected to be less extractable from, and more compatible with, polystyrene and poly(methyl methacrylate) base polymers.     

Comparison of liquid chromatography/mass spectrometry, ELISA, and phosphatase assay for the determination of microcystins in blue-green algae products

More than 100 samples of blue-green algae products (consisting of Aphanizomenon, Spirulina, and unidentified blue-green algae) in the form of pills, capsules, and powders were collected from retail outlets from across Canada. The samples were extracted with 75% methanol in water and centrifuged to remove solids. Aliquots of the extracts along with spiked blank sample extracts were sent to each participating laboratory and independently analyzed for microcystins by enzyme-linked immunosorbent assay (ELISA), protein phosphatase inhibition assay, and by liquid chromatography-tandem mass spectrometry (LC-MS/MS) after sample cleanup using C18 solid-phase extraction. The results obtained by ELISA and LC-MS/MS agreed very well over a concentration range of about 0.5-35 microg/g. The colorimetric phosphatase results generally agreed with the other 2 methods. While the 2 biochemical assays measured total microcystin content compared with a standard of microcystin LR, the LC-MS/MS method measured specific microcystins (LA, LR, RR, YR) using external standards of these for identification and quantitation. Microcystin LR was found in all positive samples by LC-MS/MS. Microcystin LA was the only other microcystin found in the samples analyzed. These 2 microcystins represent essentially all the microcystins that were present in the extracts. Otherwise, the LC-MS/MS results would have been significantly lower than the results of the biochemical assays had other unknown microcystins been present.     

Application of Cleavable Linkers to Improve Therapeutic Index of Radioligand Therapies

Radioligand therapy (RLT) is an emergent drug class for cancer treatment. The dose administered to cancer patients is constrained by the radiation exposure to normal tissues to maintain an appropriate therapeutic index. When a radiopharmaceutical or its radiometabolite is retained in the kidneys, radiation dose deposition in the kidneys can become a dose-limiting factor. A good exemplar is [¹⁷⁷Lu]Lu-DOTATATE, where patients receive a co-infusion of basic amino acids for nephroprotection. Besides peptides, there are other classes of targeting vectors like antibody fragments, antibody mimetics, peptidomimetics, and small molecules that clear through the renal pathway. In this review, we will review established and emerging strategies that can be used to mitigate radiation-induced nephrotoxicity, with a focus on the development and incorporation of cleavable linkers for radiopharmaceutical designs. Finally, we offer our perspectives on cleavable linkers for RLT, highlighting future areas of research that will help advance the technology.     

Physical fabrication of colloidal ZnO nanoparticles combining wet-grinding and laser fragmentation

Combination of wet-grinding and laser fragmentation is a promising approach to advance both methods: Laser fragmentation will be more efficient when combined with mechanical treatment and wet-grinding may take advance of the abrasion-free laser process to achieve fabrication of smaller particles. By mechanical pre-treatment of zinc oxide microparticles in a stirred-media mill, the starting material is activated by generation of crystallographic defects, which strongly enhance the efficiency of subsequent laser fragmentation. Picosecond-laser irradiation of mechanically treated and untreated microparticles suspended in water yielded in colloidal zinc oxide nanoparticles. Furthermore, nanoparticle productivity and properties can be controlled by variation of anionic surfactant concentration.     

The potential use of electrospun polylactic acid nanofibers as alternative reinforcements in an epoxy composite system

This pilot study elaborates the development of novel epoxy/electrospun polylactic acid (PLA) nanofiber composites at the fiber contents of 3, 5, and 10 wt % to evaluate their mechanical and thermal properties using flexural tests and differential scanning calorimetry (DSC). The flexural moduli of composites increase remarkably by 50.8 and 24.0% for 5 and 10 wt % fiber contents, respectively, relative to that of neat epoxy. Furthermore, a similar trend is also shown for corresponding flexural strengths being enhanced by 31.6 and 4.8%. Fractured surface morphology with scanning electron microscopy (SEM) confirms a full permeation of cured epoxy matrix into nanofiber structures and existence of nondestructive fibrous networks inside large void cavities. The glass transition temperature (T_g) of composites increases up to 54–60 °C due to embedded electrospun nanofibers compared to 50 °C for that of epoxy, indicating that fibrous networks may further restrict the intermolecular mobility of matrix in thermal effects. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 618–623     

A Convenient Synthesis of Hydrophenanthrenes the Synthesis of Ferrugindl and Xanthoperol

We wish to report an approach (equation 1) to hydrophenanthrenes which shows considerable promise of providing a general synthetic route for diterpenes, steroids, triterpenes, and tetraterpenes. Herein we illustrate the utility of this Friedel-Crafts type of procedure^3,6 by describing a synthesis of ferruginol (6) ⁷ and xanthoperol (8).⁸