Physical mechanisms behind the SERS enhancement of pyramidal pit substrates

In this paper we theoretically consider the physical mechanisms behind the surface‐enhanced Raman scattering (SERS) enhancement produced by commercially available Klarite substrates, which consist of rectangular arrays of micrometre‐sized pyramidal pits in silicon with a thin gold coating. Full three‐dimensional numerical simulations of the pits are conducted for both a real gold metal coating and a perfect electrical conductor (PEC) to determine whether the SERS enhancement is due to diffraction or plasmon effects. The pit apex angle and metal coating thickness are also varied to determine whether it is possible to further enhance the SERS signal by optimising the structural parameters of these substrates. By decreasing the film thickness and adjusting the apex angle, it is possible to achieve an enhancement almost double that of a standard Klarite substrate. Copyright © 2010 John Wiley & Sons, Ltd.     

A Convenient Synthesis of Hydrophenanthrenes the Synthesis of Ferrugindl and Xanthoperol

We wish to report an approach (equation 1) to hydrophenanthrenes which shows considerable promise of providing a general synthetic route for diterpenes, steroids, triterpenes, and tetraterpenes. Herein we illustrate the utility of this Friedel-Crafts type of procedure^3,6 by describing a synthesis of ferruginol (6) ⁷ and xanthoperol (8).⁸     

Applications of esr techniques to the study of free radical processes and kinetics in acrylic polymerizations

Electron spin resonance (ESR) techniques have been applied to a detailed study of batch and semicontinuous emulsion polymerization of methyl methacrylate; butyl acrylate and styrene have been briefly studied. Quenching of samples from the polymerization reactor followed by ESR analysis are useful, but we have developed continuous flow techniques which are preferable in many cases. ESR techniques can provide valuable information relating to the nature of free radical reactions, the concentration of propagating free radicals, and the kinetic processes in these reactions. Direct ESR analysis is most valuable but is not applicable to all systems. Spin trapping techniques can be useful for systems not accessible by direct analysis.     

Bimanes (1,5-diazabicyclo[3.3.0]octadienediones): Laser activity in syn-bimanes

The conversion of 3-methyl-4-benzyl-4-chloro-2-pyrazolin-5-one 10b was catalyzed by a mixture of potassium fluoride and alumina to give syn-(methyl, benzyl)bimane 6 (62%) without detectable formation of the anti isomer, A6 [a 1 : 1 mixture (87%) of the isomers 6 and A6 was obtained when the catalyst was potassium carbonate]. In a similar reaction syn-(methyl,carboethoxymethyl)bimane 7 (15%) with the anti isomer A7 (36%) was obtained from 3-methyl-4-carboethoxymethyl-4-chloro-2-pyrazolin-5-one 10c . syn-(Methyl, β-acetoxyethyl)bimane 8 (70%) was obtained from 3-methyl-4-β-acetoxyethyl-4-chloro-2-pyrazolin-5-one 10d (potassium carbonate catalysis) and was converted by hydrolysis to syn-(methyl, β-hydroxyethyl)bimane 9 (40%). Acetyl nitrate (nitric acid in acetic anhydride) converted anti-(amino,hydrogen)bimane 11 to anti-(amino,nitro)bimane 15 (91%), anti-(methyl,hydrogen)bimane 13 to anti-(methyl,nitro)(methyl,hydrogen)bimane 16 (57%), and degraded syn-(methyl,hydrogen)bimane 12 to an intractable mixture. Treatment with trimethyl phosphite converted syn-(bromomethyl,methyl)bimane 17 to syn-(dimethoxyphosphinylmethyl,methyl)bimane 18 (78%) that was further converted to syn-(styryl,methyl)bimane 19 (29%) in a condensation reaction with benzaldehyde. Treatment with acryloyl chloride converted syn-(hydroxymethyl,methyl)bimane 20 to its acrylate ester 21 (22%). Stoichiometric bromination of syn-(methyl,methyl)bimane 1 gave a monobromo derivative that was converted in situ by treatment with potassium acetate to syn-(acetoxymethyl,methyl)(methyl,methyl)bimane 47 . N-Amino-μ-amino-syn-(methylene,methyl)bimane 24 (68%) was obtained from a reaction between the dibromide 17 and hydrazine. Derivatives of the hydrazine 24 included a perchlorate salt and a hydrazone 25 derived from acetone. Dehydrogenation of syn-(tetramethylene)bimane 26 by treatment with dichlorodicyanobenzoquinone (DDQ) gave syn-(benzo,tetramethylene)bimane 27 (58%) and syn-(benzo)bimane 28 (29%). Bromination of the bimane 26 gave a dibromide 29 (92%) that was also converted by treatment with DDQ to syn-(benzo)bimane 28 . Treatment with palladium (10%) on charcoal dehydrogenated 5, 6, 10, 11-tetrahydro-7H,9H-benz [6, 7] indazol [1, 2a]benz[g]indazol-7,9-dione 35 to syn-(α-naphtho)bimane 36 (71%). The bimane 35 was prepared from 1,2,3,4-tetrahydro-1-oxo-2-naphthoate 37 by stepwise treatment with hydrazine to give 1,2,4,5-tetrahydro-3H-benz[g]indazol-3-one 38 , followed by chlorine to give 3a-chloro-2,3a,4,5-tetrahydro-3H-benz[g]indazol-3-one 39 , and base. Dehydrogenation over palladium converted the indazolone 34 to 1H-benz[g] indazol-3-ol 36 . Helicity for the hexacyclic syn-(α-naphtho)bimane 36 was confirmed by an analysis based on molecular modeling. The relative efficiencies (RE) for laser activity in the spectral region 500–530 nm were obtained for 37 syn-bimanes by reference to coumarin 30 (RE 100): RE > 80 for syn-bimanes 3, 5, 18 , and μ-(dicarbomethoxy)methylene-syn-(methylene,methyl)bimane 22 : RE 20–80: for syn-bimanes 1,2,4,20,24,26 , and μ-thia-syn-(methylene,methyl)bimane 50 : and RE 0-20 for 26 syn-bimanes. The bimane dyes tended to be more photostable and more water-soluble than coumarin 30. The diphosphonate 18 in dioxane showed laser activity at 438 nm and in water at 514 nm. Presumably helicity, that was demonstrated by molecular modeling, brought about a low fluorescence intensity for syn-(α-naphtho)bimane 36 , Φ0.1, considerably lower than obtained for syn-(benzo)bimane 28 , Φ0.9.     

Quantitative analysis of MWCNT agglomeration in polymeric‐based membranes using atomic force microscope

In this work, we performed an analysis on the surface properties of polyethersulfone (PES)‐based ultrafiltration membranes that were prepared by incorporating acid functionalized multiwalled carbon nanotube (f‐MWCNT) and polyvinylpyrrolidone into membrane matrix via simple blending method. The bonding‐chemistry of the nanocomposites implanted within the PES membrane was investigated by Fourier transform infrared spectrometer while atomic force microscope was employed to observe the distribution of f‐MWCNT in the membrane matrix and further measured its agglomeration quantitatively. The resultant 3D atomic force microscope images provided the most satisfactory way to examine the distribution of nanomaterials in the membranes, and with the help of ‘point profile data’ the maximum height and width of the agglomerated cluster could be quantitatively calculated. Moreover, the surface profile studies of the membrane surface provided the information about the length, volume, area, perimeter, radius and diameter of grains. It was observed that PES/nanocomposite blended membranes were held together via strong hydrogen bonding, but poor dispersion of MWCNT in the membrane matrix reduced the membrane performance in terms of protein (pepsin and bovine albumin serum) rejection and increased the surface roughness. Copyright © 2016 John Wiley & Sons, Ltd.     

Determination of potential curve parameters of excited electronic states of polyatomic molecules by resonance CARS

Resonance CARS line-shape analysis has been applied to determine the parameters of the excited electronic state potential curves of a cyanine dye and its short-lived photoisomers during the process of photoisomerization. For this very complicated situation other methods for the estimation of these values would fail. The origin shift parameters determined are very small and the homogeneous line width is smaller than the line width of the absorption band.     

Multifractal formalism for self-similar measures with weak separation condition

For any self-similar measure μ on satisfying the weak separation condition, we show that there exists an open ball U₀ with μ(U₀)>0 such that the distribution of μ, restricted on U₀, is controlled by the products of a family of non-negative matrices, and hence μ|_U0 satisfies a kind of quasi-product property. Furthermore, the multifractal formalism for μ|_U0 is valid on the whole range of dimension spectrum, regardless of whether there are phase transitions. Moreover the dimension spectra of μ and μ|_U0 coincide for q0. This result unifies and improves many of the recent works on the multifractal structure of self-similar measures with overlaps.     

Thermal stability of cubic boron nitride films deposited by chemical vapor deposition

Thermal stability of well-crystallized cubic boron nitride (cBN) films grown by chemical vapor deposition has been investigated by cathodoluminescence (CL), Raman spectroscopy, and scanning electron microscopy (SEM) with the cBN films annealed at various temperatures up to 1,300 degrees C. The crystallinity of the cBN films further improves, as indicated by a reduction of the relevant Raman line width, when the annealing temperature exceeds 1,100 degrees C. Structural damage or amorphization was observed on the grain boundaries of the cBN crystals when annealing temperature reaches 1,300 degrees C. The CL spectra are found to be unchanged up to 1,100 degrees C after annealing at 500 degrees C, showing the stability of the cBN films in electronic properties up to this temperature. New features were observed in the CL spectra when annealing temperature reaches 1,200-1,300 degrees C.     

Precisely Controlled Delivery of Abaloparatide through Injectable Hydrogel to Promote Bone Regeneration

Side‐effects from allograft, limited bone stock, and site morbidity from autograft are the major challenges to traditional bone defect treatments. With the advance of tissue engineering, hydrogel injection therapy is introduced as an alternative treatment. Therapeutic drugs and growth factors can be carried by hydrogels and delivered to patients. Abaloparatide, as an analog of human recombinant parathyroid hormone protein (PTHrp) and an alternative to teriparatide, has been considered as a drug for treating postmenopausal osteoporosis since 2017. Since only limited cases of receiving abaloparatide with polymeric scaffolds have been reported, the effects of abaloparatide on pre‐osteoblast MC3T3‐E1 are investigated in this study. It is found that in vitro abaloparatide treatment can promote pre‐osteoblast MC3T3‐E1 cells’ viability, differentiation, and mineralization significantly. For the drug delivery system, 3D porous structure of the methacrylated gelatin (GelMA) hydrogel is found effective for prolonging the release of abaloparatide (more than 10 days). Therefore, injectable photo‐crosslinked GelMA hydrogel is used in this study to prolong the release of abaloparatide and to promote healing of defected bones in rats. Overall, data collected in this study show no contradiction and imply that Abaloparatide‐loaded GelMA hydrogel is effective in stimulating bone regeneration.