Remobilization of 60Co, 85Sr, 137Cs, 152Eu,and 241Am from a Contaminated Soil Column by Groundwater and Organic Ligands

Transport in Porous Media - The desorption rate of 60Co, 85Sr, 137Cs, 152Eu, and 241Am from soil collected from Inshas disposal site in Egypt was investigated to understand the desorption and...     

Host-guest interactions at self-assembled monolayers of cyclodextrins on gold

We have developed synthesis routes for the introduction of short and long dialkylsulfides onto the primary side of alpha-, beta-, and gamma-cyclodextrins. Monolayers of these cyclodextrin adsorbates were characterized by electrochemistry, wettability studies, X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (TOF-SIMS), and atomic force microscopy (AFM). The differences in thickness and polarity of the outerface of the monolayers were measured by electro-chemistry and wettability studies. On average about 70% of the sulfide moieties were used for binding to the gold, as measured by XPS. Tof-SIMS measurements showed that the cyclodextrin adsorbates adsorb without any bond breakage. AFM measurements revealed for beta-cyclodextrin monolayers a quasi-hexagonal lattice with a lattice constant of 20.6 A, which matches the geometrical size of the adsorbate. The alpha-cyclodextrin and gamma-cyclodextrin monolayers are less ordered. Interactions of the anionic guests 1-anilinonaphthalene-8-sulfonic acid (1,8-ANS) and 2-(p-toluidinyl)naphthalene-6-sulfonic acid (2,6-TNS) and the highly ordered monolayers of heptapodant beta-cyclodextrin adsorbates were studied by surface plasmon resonance (SPR) and electrochemical impedance spectroscopy. The SPR measurements clearly showed interactions between a beta-cyclodextrin monolayer and 1,8-ANS. Electrochemical impedance spectroscopy measurements gave high responses even at low guest concentrations (< or = 5 microM). The association constant for the binding of 1,8-ANS (K = 289,000 +/- 13,000M-1) is considerably higher than the corresponding value in solution. (Partial) methylation of the secondary side of the beta-cyclodextrin strongly decreases the binding.     

Factors affecting the sorption behavior of Cs<Superscript>+</Superscript> and Sr<Superscript>2+</Superscript> using biosorbent material

In this study, saw dust has been used as precursor for production of low cost activated carbon using potassium hydroxide (KOH) and steam activation technique. The activated carbon was used to remove Cs⁺ and Sr²⁺ ions from aqueous solutions by batch operation, and the extent of adsorption was investigated as a function of solution pH, temperature, shaking time, and initial concentration. The influence of interfering ions was also investigated. The removal of metal ions was pH dependent and the adsorption capacity reaches its maximum 43% and 61.5% at pH 5.0 and 6.0 for Cs⁺ and Sr²⁺ ions, respectively. Thermodynamic studies showed different behaviours where an endothermic, non-spontaneous process was shown for Cs⁺ while an exothermic, spontaneous process was obtained for Sr²⁺. The kinetic data of both ions was described well by pseudo-second order rate equation. The two equilibrium models (Langmuir and Freundlich) have been also applied. Desorption studies indicated that HCl was the most effective desorbing eluent. The investigated adsorbent showed good results towards cesium and strontium removal from aqueous media that could be a promising method due to its low-cost and good efficiency.     

Spectrophotometric and atomic absorption determination of Ni(II) in fresh and sea waters after preconcentration by flotation

A highly selective and sensitive procedure for flotation separation followed by spectrophotometric determination, confirmed by AAS, of Ni(II) traces is proposed. The maximum flotation separation (100%) is achieved at approximately 25 degrees C in the pH range of 1-3 using sodium diethyldithiocarbamate (as a collector) and oleic acid surfactant. The floated (1 : 2) colored complex is measured spectrophotometrically at 430 nm over a concentration range of 0.5-4.0 microg/g with a molar absorptivity of 0.44 x 10(4) L mol(-1) cm(-1). The procedure was successfully applied for the separation and determination of Ni(II) in fresh and sea waters.     

Chromatographic separation of certain metal ions using a bifunctional quaternary ammonium-sulfonate mixed bed ion-exchanger

The separation behaviour of Pb(2+), Cu(2+), Cd(2+), Co(2+), Zn(2+) and Ni(2+) on bifunctional quaternary ammonium-sulfonate mixed ion-exchangers (Dionex, IonPac CS5 and CG5) was studied using different eluents including solutions of oxalic acid, potassium oxalate, sodium oxalate and ammonium oxalate. Separated metal ions were followed by using 4-(2-pyridylazo) resorcinol (PAR) as post-colouring complex. The retention factors of different ions proved to be dependent on the pH, concentration, nature of each complexing agent, and to less extent on eluent flow rate. The retention behaviour and separation mechanism of complexed metal analytes are discussed in the light of the stability of metal complexes and the ligand complexing ability of used eluent. Comparison between various mobile phases is evaluated, and both sodium and potassium oxalate can be used successfully for simultaneous separation of studied metals with good resolution within short elution periods. The method can be used in different applications including analysis of bottled water from different resources.     

A new approach to variable selection in least squares problems

The title Lasso has been suggested by Tibshirani (1996) as acolourful name for a technique of variable selection which requiresthe minimization of a sum of squares subject to an l₁ bound on the solution. This forces zero components in the minimizingsolution for small values of . Thus this bound can functionas a selection parameter. This paper makes two contributionsto computational problems associated with implementing the Lasso:(1) a compact descent method for solving the constrained problemfor a particular value of is formulated, and (2) a homotopymethod, in which the constraint bound becomes the homotopyparameter, is developed to completely describe the possibleselection regimes. Both algorithms have a finite terminationproperty. It is suggested that modified Gram-Schmidt orthogonalizationapplied to an augmented design matrix provides an effectivebasis for implementing the algorithms.     

Siderophore-Mediated Iron Uptake Promotes Yeast–Bacterial Symbiosis

In the present study, siderophore produced by the marine yeast Aureobasidium pullulans was characterized as hydroxamate by chemical and bioassays. The hydroxamate assignment was supported by the appearance of peaks at 1,647.21?C1,625.99?cm^?1 and at 1,435.04?cm^?1 in the infrared spectrum. The purified siderophore exhibited specific growth-promoting activity under iron-limited conditions for siderophore auxotrophic probiotic bacteria. Cross-utilization of siderophore indicates a symbiotic relationship between the yeast A. pullulans and the selected probiotic bacterial strains. Statistical optimization of medium components for improved siderophore production in A. pullulans was depicted by response surface methodology. The shift in UV?CVis spectroscopy indicates the photoreactive property and subsequent oxidative cleavage of purified siderophore on exposure to sunlight.     

Cloud point extraction and preconcentration of gold in geological matrices prior to flame atomic absorption determination

Brilliant green was used as a complexing agent in cloud point extraction (CPE) and applied for selective preconcentration of trace amounts of gold in geological matrices. The analyte in the initial aqueous solution was acidified with hydrochloric acid (0.1 M) and octylphenoxypolyethoxyethanol (Triton X-114) was added as a surfactant. After phase separation, based on the cloud point separation of the mixture, the surfactant rich phase was diluted with methanol and the analyte determined in the surfactant rich phase by flame atomic absorption spectrometry (FAAS). After optimization of the complexation and extraction conditions, a preconcentration factor of 31 was obtained for only 10 mL of sample. The analytical curve was linear in the range of 3–1000 ng mL⁻¹ and the limit of detection was 1.5 ng mL⁻¹. The proposed method was applied to the determination of gold in geological samples.     

Flux line lattice symmetries in the borocarbide superconductor LuNi2B2C

We compare the results of small angle neutron scattering on the flux line lattice (FLL) obtained in the borocarbide superconductor LuNi₂B₂C with the applied field along the c- and a-axes. For H‖c the temperature dependence of the FLL structural phase transition from square to hexagonal symmetry was investigated. Above 10 K the transition onset field. H ₂(T), rises sharply, bending away from H _c2(T) in contradiction to theoretical predictions of the two merging. For H‖a a first order FLL reorientation transition is observed at H _tr=3–3.5 kOe. Below H _tr the FLL nearest neighbor direction is parallel to the b-axis, and above H _tr to the c-axis. This transition cannot be explained using nonlocal corrections to the London model.