Determination of radiative lifetimes in neutral nitrogen using short laser pulses from a distributed feedback dye laser

Radiative lifetimes were determined for two short-lived states in neutral nitrogen. Following photo-dissociation and two-photon excitation employing the same UV source, excitation to higher states was performed with a distributed feedback dye laser (DFDL). The lifetimes were found to be τ(2p ²4d ⁴ D _7/2)=17(3) ns and τ(2p ²5s ⁴ P _5/2)=22(3) ns.     

Superporous agarose beads as a hydrophobic interaction chromatography support

Superporous agarose beads were used as a support for hydrophobic interaction chromatography. These beads have large connecting flow pores in addition to their normal diffusion pores. The flow pores, which are approximately one fifth of the overall diameter of the superporous agarose beads, were earlier shown to give the beads improved mass transfer properties relative to homogeneous agarose beads (Gustavsson and Larsson, J. Chromatogr. A, 734 (1996) 231–240). Superporous agarose beads and homogeneous agarose beads of the same particle size range (106–180 μm) were derivatized with phenyl groups. The properties of the superporous beads were then compared with the homogeneous beads in the separation of a mixture of three model proteins (ribonuclease A, lysozyme and bovine serum albumin) at various superficial flow velocities from 30 to 600 cm/h. The superporous beads gave satisfactory separation at flow velocities five times higher than was possible for homogeneous beads. The performance of the two types of beads was also compared in the purification of lactate dehydrogenase from a beef heart extract at a superficial flow velocity of 150 cm/h. The superporous beads performed considerably better, leading to twice the purification factor and twice the concentration of the desired product. The results were interpreted using the theoretical treatment given by Carta and Rodrigues (Carta and Rodrigues, Chem. Eng. Sci., 48 (1993) 3927).     

Shake-up and multiplet structure of ESCA satellites of Cu compounds

The ESCA inner shell spectra of Cu compounds are investigated theoretically. It is shown that the large satellites appearing for Cu(II) compounds correspond to shake-up states which are close to the configuration p⁵d⁹ and have the characteristic multiplet splitting of this configuration.     

Iron flux inside the International Space Station is measured to be lower than predicted

Iron abundance in cosmic rays impinging on astronauts in space habitats is of paramount importance when calculating the radiation risk for human space exploration. The concurrent high relative abundance of iron in Galactic Cosmic Rays (GCR) and iron ability to produce damages at cellular and molecular levels, together with recent radiobiology results suggests iron as a major candidate to be studied in order to produce accurate radiation hazard assessments. Iron may be in fact responsible for a large percentage of cancer risk during a long interplanetary voyage, and therefore deserves a specific attention. We built a simple model based on CREME96 for the radiation in the International Space Station (ISS) and tested it against recently performed measurements with the ALTEA and Alteino particle detectors. While we can report a good agreement between 50m and 250 keV/μm (very good for several peaks such as Si, Mg, S) we show an overestimation by this model of iron abundances of about 25–80% when compared to the measurements. New analysis on previously published work, supporting this result, are also reported.Reasons for this overestimation are discussed, they are likely to be related to the not detailed enough transport through the multiplicity of the ISS shielding and to the often used simplification of “aluminum equivalent shielding”. The iron sources in LEO, possibly not yet accurate enough when transported in Low Earth Orbit, can also play a role. New concurrent measurements (inside–outside the ISS) are suggested to help resolving this issue.     

Assessment of high-resolution methods for numerical simulations of compressible turbulence with shock waves

Flows in which shock waves and turbulence are present and interact dynamically occur in a wide range of applications, including inertial confinement fusion, supernovae explosion, and scramjet propulsion. Accurate simulations of such problems are challenging because of the contradictory requirements of numerical methods used to simulate turbulence, which must minimize any numerical dissipation that would otherwise overwhelm the small scales, and shock-capturing schemes, which introduce numerical dissipation to stabilize the solution. The objective of the present work is to evaluate the performance of several numerical methods capable of simultaneously handling turbulence and shock waves. A comprehensive range of high-resolution methods (WENO, hybrid WENO/central difference, artificial diffusivity, adaptive characteristic-based filter, and shock fitting) and suite of test cases (Taylor–Green vortex, Shu–Osher problem, shock-vorticity/entropy wave interaction, Noh problem, compressible isotropic turbulence) relevant to problems with shocks and turbulence are considered. The results indicate that the WENO methods provide sharp shock profiles, but overwhelm the physical dissipation. The hybrid method is minimally dissipative and leads to sharp shocks and well-resolved broadband turbulence, but relies on an appropriate shock sensor. Artificial diffusivity methods in which the artificial bulk viscosity is based on the magnitude of the strain-rate tensor resolve vortical structures well but damp dilatational modes in compressible turbulence; dilatation-based artificial bulk viscosity methods significantly improve this behavior. For well-defined shocks, the shock fitting approach yields good results.     

PHYSICAL STRUCTURE AND PHASE PROPERTIES OF AQUEOUS SYSTEMS OF LIPIDS FROM RYE AND TRITICALE IN RELATION TO WHEAT LIPIDS

In connection with studies of technical functionality of lipids in cereals, the aqueous systems of lipids from rye and tri-ticale flour are described and compared to different wheat culti-vars. Rye lipids give a lamellar liquid-crystalline phase with very small ordered regions, and this phase is continuously changed into an L2-phase with increasing water content. Triticale lipids exhibit phase equilibria in between lipids of wheat and of rye. Evidence is given for a significant role of the lamellar liquid--crystalline phase with regard to technical functionality when the cereal flour is worked in water to give a dough.     

Mercerized cellulose biocomposites: a study of influence of mercerization on cellulose supramolecular structure, water retention value and tensile properties

In this study the effect of the mercerization degree on the water retention value (WRV) and tensile properties of compression molded sulphite dissolving pulp was evaluated. The pulp was treated with 9, 10, or 11 % aqueous NaOH solution for 1 h before compression molding. To study the time dependence of mercerization the pulp was treated with 12 wt% aqueous NaOH for 1, 6 or 48 h. The cellulose I and II contents of the biocomposites were determined by solid state cross polarization/magic angle spinning carbon 13 nuclear magnetic resonance (CP/MAS ¹³C NMR) spectroscopy. By spectral fitting of the C6 and C1 region the cellulose I and II content, respectively, could be determined. Mercerization decreased the total crystallinity (sum of cellulose I and cellulose II content) and it was not possible to convert all cellulose I to cellulose II in the NaOH range investigated. Neither increased the conversion significantly with 12 wt% NaOH at longer treatment times. The slowdown of the cellulose I conversion was suggested as being the result from the formation of cellulose II as a consequence of coalescence of anti-parallel surfaces of neighboring fibrils (Blackwell et al. in Tappi 61:71–72, 1978; Revol and Goring in J Appl Polym Sci 26:1275–1282, 1981; Okano and Sarko in J Appl Polym Sci 30:325–332, 1985). Compression molding of the partially mercerized dissolving pulps yielded biocomposites with tensile properties that could be correlated to the decrease in cellulose I content in the pulps. Mercerization introduces cellulose II and disordered cellulose and lowered the total crystallinity reflected as higher water sensitivity (higher WRV values) and poorer stiffness of the mercerized biocomposites.     

Supralinearity in nuclear research emulsions

Nuclear emulsions processed in discriminating developers, intended to suppress small latent image sites, exhibit supralinear sensitometric blackness-exposure curves, whose character varies according to developing time, concentration, and composition, yielding hittedness ranging from 1 to 8, singly and in combination. These emulsion-processing combinations display the phenomena called ion-kill (sensitization by the transit of a single charged particle) and gamma- kill (sensitization by the overlap of secondary electron paths, whether from x-rays or from the delta-rays of heavy ions) in radiobiology. Here emulsions are blackened by x-rays when these same plates reveal no electron tracks, or no alpha-particle tracks, or even no fission fragment tracks. The supralinearity of the emulsion response to x-rays, and the consequent suppression of low LET radiations suggest that these materials have the potential to mimic the response of biological systems to particulate radiations of different charge and speed.