Synthesis of α-2′-deoxynucleosides

α-Thymidine (4) was synthesized from thymidine (1) in 3 steps in 36% overall yield without using chro-matography and with the possibility of increasing the yield to 85% by reusing the remaining α,β-mixture. 1-(2-Deoxy-3,5-di-O-p-toluoyl-α-D-erythro-pentofuranosyl)thymine (3) was further converted to 1-(2-deoxy-α-D-erythro-pentofuranosyl)-5-methylcytosine (5) .     

Characterization of poly(3,4-ethylenedioxythiophene):tosylate conductive polymer microelectrodes for transmitter detection

In this paper we investigate the physical and electrochemical properties of micropatterned poly(3,4-ethylenedioxythiophene):tosylate (PEDOT:tosylate) microelectrodes for neurochemical detection. PEDOT:tosylate is a promising conductive polymer electrode material for chip-based bioanalytical applications such as capillary electrophoresis, high-performance liquid chromatography, and constant potential amperometry at living cells. Band electrodes with widths down to 3 μm were fabricated on polymer substrates using UV lithographic methods. The electrodes are electrochemically stable in a range between -200 mV and 700 mV vs. Ag/AgCl and show a relatively low resistance. A wide range of transmitters is shown to oxidize readily on the electrodes. Kinetic rate constants and half wave potentials are reported. The capacitance per area was found to be high (1670 ± 130 μF cm(-2)) compared to other thin film microelectrode materials. Finally, we use constant potential amperometry to measure the release of transmitters from a group of PC 12 cells. The results show how the current response decreases for a series of stimulations with high K(+) buffer.     

222RN at Bermuda and Mauna Loa: Local and distant sources

Continuous measurements of atmospheric²²²Rn were made for the past three years by the Environmental Measurements Laboratory (EML) at the Atmosphere/Ocean Chemistry Experiment site located at Tudor Hill, Bermuda and at the National Oceanic and Atmospheric Administration/Climate Monitoring and Diagnostics Laboratory Mauna Loa Observatory. The²²²Rn analyzer is based on the two-filter tube method. At the Bermuda site, monthly median²²²Rn concentration range from 50 to 700 mBq m^–3, and the concentrations vary seasonally, with a maximum in the winter and a minimum in the summer. The concentrations are significantly elevated when local winds traverse the island. At MLO, monthly median²²²Rn concentrations range from 100 mBq m^–3 during the fall months to 400 mBq m^–3 during the spring months. The springtime maximum values correspond to periods of rapid transport in the free troposphere from the Asian continent, corroborated by backward air mass trajectories. The²²²Rn data are also used to help decipher local daily upslope/downslope conditions present at MLO. This study illustrates the value of atmospheric²²²Rn monitoring, when screened through the filter of local meteorology, in studying the transport of continental air to the oceans, as well as the dynamics of local meteorological effects.     

Chlorobiphenyls in sewage sludge; comparison of extraction methods

Six extraction methods for the analysis of PCBs (CB-28, CB-52, CB-101, CB-118, CB-138, CB-153 and CB-180) in sewage sludge were tested. A certified reference material (CRM 392) was used for the evaluation of the performance of the methods. Soxhlet-Dean-Starch with toluene as solvent, Soxhlet with hexane:acetone (2:3), cold digestion/saponification with 2 mol/L KOH in methanol followed by partition with hexane, and sonicated liquid-solid extraction with hexane:acetone (1:1) produced accurate results (97%, 93%, 104%, and 88%, respectively) with acceptable precisions (6.2%, 6.8%, 15% and 12%, respectively). Results in close agreement with the certified value for all congeners were obtained by treatment with BF₃-methanol prior to partition with dichloromethane. However, this is a tedious procedure and involves the use of hazardous compounds. Cyclic steam distillation produced results with an accuracy of around 80% and a good precision (5.2%). The very low consumption of solvents and other expensive chemicals by this technique and the possibility of analyzing the extract directly without clean-up make it an interesting alternative to the more sophisticated methods. Column elution with dichloromethane was found to be less efficient (61%), but it is a rapid, direct method with a low consumption of solvents and it may therefore serve as screening method. Received: 29 April 1997 / Revised: 30 July 1997 / Accepted: 6 August 1997     

Synthesis, characterization, and adsorption properties of nanocrystalline ZSM-5

Nanocrystalline ZSM-5 with a Si/Al ratio of 20 was synthesized using clear solutions and a hydrothermal synthesis procedure. The resulting ZSM-5 materials were characterized by powder X-ray diffraction, scanning electron microscopy (SEM), nitrogen adsorption isotherms, solid-state nuclear magnetic resonance, and toluene adsorption. A commercial ZSM-5 sample was similarly characterized for comparison with the synthesized materials. The particle sizes of the synthesized ZSM-5 samples were calculated using the measured external surface areas and were determined to be 15 and 60 nm. SEM images indicated that the ZSM-5 samples consist of agglomerated and possibly intergrown particles. Toluene adsorption measurements showed that the ZSM-5 sample with a particle size of 15 nm adsorbed approximately 50% more toluene than the other ZSM-5 samples, most likely due to the adsorption of toluene on the external surface. For the toluene adsorbed on the internal zeolite surface, approximately one toluene molecule was adsorbed per channel intersection for each of the ZSM-5 samples.     

Structural and magnetic investigations of the mixed-valence Fe(II,III) two-dimensional layer complex, [Fe2(II) Fe2(III)(HCOO)10(C6H7N)6]n.

The structure of the complex, [Fe2(II)Fe2(III)(HCOO)10(C6H7N6)n, (1) exhibits a neutral two-dimensional layer network of alternating iron(II) and iron(III) ions, bridged equatorially by formate groups. All iron atoms are octahedrally coordinated, with iron(III) coordinating axially to one gamma-picoline and one formate group, while the iron(II) centers interact axially with two gamma-picoline groups, above and below the layer plane. The complex crystallizes in the triclinic space group P1 at all studied temperatures [at 120 K, the cell dimensions are: a = 10.228(1), b = 12.071(1), c = 12.072(1) A, alpha = 89.801(2), beta = 71.149(2), gamma = 73.371(2) degrees]. An intralayer antiferromagnetic exchange interaction of J = -2.8 cm(-1) between iron(II) and iron(III) was observed in the magnetic studies. Decreasing the temperature to close to 20 K causes a magnetic-ordering phenomenon to occur and a low-temperature phase with a long-range antiferromagnetic spin orientation appears. The magnetic phase transition was confirmed by M?ssbauer spectroscopic studies at temperatures above and below the critical temperature. Structural information of 1 from synchrotron X-ray diffraction data collected at room temperature and 16 K suggests that the antiferromagnetic ordering is caused by an enhanced pi-pi interaction between chi-picoline groups from adjacent layers.     

Crystal structure of a partly self-complementary peptide nucleic acid (PNA) oligomer showing a duplex-triplex network

The X-ray structure of a partly self-complementary peptide nucleic acid (PNA) decamer (H-GTAGATCACT-l-Lys-NH(2)) to 2.60 A resolution is reported. The structure is mainly controlled by the canonical Watson-Crick base pairs formed by the self-complementary stretch of four bases in the middle of the decamer (G(4)A(5)T(6)C(7)). One right- and one left-handed Watson-Crick duplex are formed. The two PNA units C(9)T(10) change helical handedness, so that each PNA strand contains both a right- and a left-handed section. The changed handedness in C(9)T(10) allows formation of Hoogsteen hydrogen bonding between C(9)T(10) and G(4)A(5) of a PNA strand in an adjacent Watson-Crick double helix of the same handedness. Thereby, a PNA-PNA-PNA triplex is formed. The PNA unit A(3) forms a noncanonical base pair with A(8) in a symmetry-related strand of opposite handedness; the base pair is of the A-A reverse Hoogsteen type. The structural diversity of this PNA demonstrates how the PNA backbone is able to adapt to structures governed by the stacking and hydrogen-bonding interactions between the nucleobases. The crystal structure further shows how PNA oligomers containing limited sequence complementarity may form complex hydrogen-bonding networks.     

Squeezing the [Cu-OH...H2O-Cu]3+ bridge by cryptate encapsulation

Treatment of cryptand L(1) with Cu(II) generates a H3O2(-)-bridged dicopper(II) cryptate, 2, where the guest anion has responded to steric constraint by a significant shortening of the O-O distance to 2.325(9) A; computational optimization at the B3LYP/6-31(d) level suggests that the bridging O-H...O H-bond is bent (approximately 157 degrees) but that the barrier to interchange of the bridging H atom is low (<4 kJ mol(-1)). This cryptate, rather than the [Cu2L(1)muCN]3+ species recently claimed to derive from cleavage of the C-C bond of the solvent, is the product of acetonitrile recrystallization of the initially formed reaction product, 1.