Über Münzmetall‐Quecksilber‐Chalkogenidhalogenide. IV1) Hydrothermalsynthese und Kristallstruktur von CuHgSI und CuHg2S2I

On Coinage Metal Mercury Chalcogenide Halides. IV Hydrothermal Synthesis and Crystal Structure of CuHgSI and CuHg₂S₂I The hydrothermal reaction of CuI with α‐HgS in diluted aqueous HI‐solution as solvent at 180 °C yields dark red crystals of CuHgSI. The compound crystallizes orthorhombic in the space group Pna2₁ with a = 718.3(1) pm, b = 834.3(2) pm and c = 698.9(1) pm and Z = 4. CuHg₂S₂I was obtained by the hydrothermal reaction of CuI with α‐HgS in diluted HI‐solution at 300 °C as black crystals. The compound crystallizes orthorhombic in the space group Cmc2₁ with a = 1261.8(3) pm, b = 722.4(1) pm and c = 693.7(1) pm and Z = 4. Both crystal structures could be explained as distorted version of the Wurtzite structure type in which two different types of anion‐lattices are built up.     

Optical tweezers applied to a microfluidic system

We will demonstrate how optical tweezers can be combined with a microfluidic system to create a versatile microlaboratory. Cells are moved between reservoirs filled with different media by means of optical tweezers. We show that the cells, on a timescale of a few seconds, can be moved from one reservoir to another without the media being dragged along with them. The system is demonstrated with an experiment where we expose E. coli bacteria to different fluorescent markers. We will also discuss how the system can be used as an advanced cell sorter. It can favorably be used to sort out a small fraction of cells from a large population, in particular when advanced microscopic techniques are required to distinguish various cells. Patterns of channels and reservoirs were generated in a computer and transferred to a mask using either a sophisticated electron beam technique or a standard laser printer. Lithographic methods were applied to create microchannels in rubber silicon (PDMS). Media were transported in the channels using electroosmotic flow. The optical system consisted of a combined confocal and epi-fluorescence microscope, dual optical tweezers and a laser scalpel.     

Direct optical detection of singlet oxygen from a single cell

Singlet oxygen has been detected in single nerve cells by its weak 1270 nm phosphorescence (a1deltag --> X3sigmag-) upon irradiation of a photosensitizer incorporated in the cell. Thus, one can now consider the application of direct optical imaging techniques to mechanistic studies of singlet oxygen at the single-cell level.     

Microwave-assisted group-transfer cyclization of organotellurium compounds

Primary- and secondary-alkyl aryl tellurides, prepared by arenetellurolate ring-opening of epoxides/ O-allylation, were found to undergo rapid (3-10 min) group-transfer cyclization to afford tetrahydrofuran derivatives in 60-74% yield when heated in a microwave cavity at 250 degrees C in ethylene glycol or at 180 degrees C in water. To go to completion, similar transformations had previously required extended photolysis in refluxing benzene containing a substantial amount of hexabutylditin. The only drawback of the microwave-assisted process was the loss in diastereoselectivity which is a consequence of the higher reaction temperature. Substitution in the Te-aryl moiety of the secondary-alkyl aryl tellurides (4-OMe, 4-H, 4-CF(3)) did not affect the outcome of the group-transfer reaction in ethylene glycol. However, at lower temperature, using water as a solvent, the CF(3) derivative failed to react. The microwave-assisted group-transfer cyclization was extended to benzylic but not to primary- and secondary-alkyl phenyl selenides.     

Mechanistic investigation leads to a synthetic improvement in the hydrolytic kinetic resolution of terminal epoxides

The mechanism of the hydrolytic kinetic resolution (HKR) of terminal epoxides was investigated by kinetic analysis using reaction calorimetry. The chiral (salen)Co-X complex (X = OAc, OTs, Cl) undergoes irreversible conversion to (salen)Co-OH during the course of the HKR and thus serves as both precatalyst and cocatalyst in a cooperative bimetallic catalytic mechanism. This insight led to the identification of more active catalysts for the HKR of synthetically useful terminal epoxides.     

Effects of ground loop currents on signal intensities in electrospray mass spectrometry

The occurrence of electrochemical processes during the operation of an electrospray ionization (ESI) source is well established. In the positive ion mode, electrons are drawn from the ESI metal capillary to a high voltage power supply. These electrons are the product of charge-balancing oxidation reactions taking place at the liquid/metal interface of the ion source. In a recent study, (Anal. Chem.2001, 73, 4836-4844), our group has shown that the introduction of a ground loop can dramatically enhance the rate of these oxidation processes. Such a ground loop can be introduced by connecting the sample infusion syringe (or the liquid chromatography column, in the case of LC-MS studies) to ground. The magnitude of the ground loop current can be controlled by the electrolyte concentration in the analyte solution, and by the dimensions of the capillary connecting the syringe needle and the ESI source. Using ferrocene as a model system, it is demonstrated that the introduction of such a ground loop can significantly enhance the signal intensity of analytes that form electrochemically ionized species during ESI. However, analytes that form protonated molecular ions, such as reserpine, also show higher signal intensities when a ground loop is introduced into the system. This latter observation is attributed to the occurrence of electrolytic solvent (acetonitrile and/or water) oxidation processes. These reactions generate protons within the ion source, and thus facilitate the formation of [M + nH](n+) ions. Overall, this work provides an example of how the careful control of electrochemical parameters can be exploited to optimize signal intensities in ESI-MS.     

Formation of N719 dye multilayers on dye sensitized solar cell photoelectrode surfaces investigated by direct determination of element concentration depth profiles

The structure of the dye layer adsorbed on the titania substrate in a dye-sensitized solar cell is of fundamental importance for the function of the cell, since it strongly influences the injection of photoelectrons from the excited dye molecules into the titania substrate. The adsorption isotherms of the N719 ruthenium-based dye were determined both with a direct method using the depth profiling technique neutral impact collision ion scattering spectroscopy (NICISS) and with the standard indirect solution depletion method. It is found that the dye layer adsorbed on the titania surface is laterally inhomogeneous in thickness and there is a growth mechanism already from low coverage levels involving a combination of monolayers and multilayers. It is also found that the amount of N719 adsorbed on the substrate depends on the titania structure. The present results show that dye molecules in dye-sensitized solar cells are not necessarily, as presumed, adsorbed as a self-assembled monolayer on the substrate.     

Preparation of a novel HALS polypropylene stabilizer

The radiation induced graft copolymerization of m-isopropenyl-α,α-dimethyl benzyl iso-cyanate (m-TMI) and styrene onto polypropylene was carried out. The extent of grafting increased with increasing amount of styrene and with increased radiation dose. A graft load of 180% was obtained by immersing a 50 kGy pre-irradiated film in a monomer solution containing 25 mol % m-TMI and 75 mol % styrene. The graft copolymer is suitable for covalently binding nonpolymerizable stabilizers with a suitable nucleophilic moiety. In this work the isocyanate moiety of the graft copolymer was allowed to react with 4-amino-2,2,6,6-tetramethyl piperidine, a hindered amine light stabilizer. Fourier trans-formed infrared spectroscopy confirmed the formation of an urea moiety. © 1995 John Wiley & Sons, Inc.     

Mechanosorptive creep in nanocellulose materials

The creep behavior of nanocellulose films and aerogels are studied in a dynamic moisture environment, which is crucial to their performance in packaging applications. For these materials, the creep rate under cyclic humidity conditions exceeds any constant humidity creep rate within the cycling range, a phenomenon known as mechanosorptive creep. By varying the sample thickness and relative humidity ramp rate, it is shown that mechanosorptive creep is not significantly affected by the through-thickness moisture gradient. It is also shown that cellulose nanofibril aerogels with high porosity display the same accelerated creep as films. Microstructures larger than the fibril diameter thus appear to be of secondary importance to mechanosorptive creep in nanocellulose materials, suggesting that the governing mechanism is found between molecular scales and the length-scales of the fibril diameter.