Phase study of the system Li2Se-In2Se3

The binary system Li₂Se-In₂Se₃ was investigated in the range of 40 to 100 mol% In₂Se₃ by thermoanalytical and X-ray methods. The system is characterized by two eutectic points. Beside the two binary components and the known ternary compound LiInSe2 another ternary compound crystallizes in this binary system at 83.3 mol% In₂Se₃. This compound was identified as LiIn₅Se₈. In contrast to (Cu, Ag)^IB₅ ^IIIC₈ ^VI compounds such as CuIn₅S₈ [1] it does not crystallize in the spinel structure. LiIn₅Se₈ shows a stratified structure. The melting point was determined to be at 810°C. Starting from room temperature up to the melting point no phase transitions were observed. This revised version was published online in July 2006 with corrections to the Cover Date.     

Use of molecular dynamics in the design and structure determination of a photoinducible beta-hairpin

The study presented here consists of three parts. In the first, the ability of a set of differently substituted diazobenzene-based linkers to act as photoswitchable beta-turn building blocks was assessed. A 12-residue peptide known to form beta-hairpins was taken as the basis for the modeling process. The central (beta-turn) residue pair was successively replaced by six symmetrically ((o,o), (m,m), or (p,p)) substituted (aminomethyl/carboxymethyl or aminoethyl/carboxyethyl) diazobenzene derivatives leading to a set of peptides with a photoswitchable backbone conformation. The folding behavior of each peptide was then investigated by performing molecular dynamics simulations in water (4 ns) and in methanol (10 ns) at room temperature. The simulations suggest that (o,o)- and (m,m)-substituted linkers with a single methylene spacer are significantly better suited to act as photoswitchable beta-turn building blocks than the other linkers examined in this study. The peptide containing the (m,m)-substituted linker was synthesized and characterized by NMR in its cis configuration. In the second part of this study, the structure of this peptide was refined using explicit-solvent simulations and NOE distance restraints, employing a variety of refinement protocols (instantaneous and time-averaged restraining as well as unrestrained simulations). We show that for this type of systems, even short simulations provide a significant improvement in our understanding of their structure if physically meaningful force fields are employed. In the third part, unrestrained explicit-solvent simulations starting from either the NMR model structure (75 ns) or a fully extended structure (25 ns) are shown to converge to a stable beta-hairpin. The resulting ensemble is in good agreement with experimental data, indicating successful structure prediction of the investigated hairpin by classical explicit-solvent molecular dynamics simulations.     

Preparation and redox properties of N,N,N-1,3,5-trialkylated flavin derivatives and their activity as redox catalysts

Eight different flavin derivatives have been synthesized and the electronic effects of substituents in various positions on the flavin redox chemistry were investigated. The redox potentials of the flavins, determined by cyclic voltammetry, correlated with their efficiency as catalysts in the H2O2 oxidation of methyl p-tolyl sulfide. Introduction of electron-withdrawing groups increased the stability of the reduced catalyst precursor.     

Surprising Homolytic Gas Phase Co−C Bond Dissociation Energies of Organometallic Aryl-Cobinamides Reveal Notable Non-Bonded Intramolecular Interactions

Aryl-cobalamins are a new class of organometallic structural mimics of vitamin B₁₂ designed as potential ‘antivitamins B₁₂’. Here, the first cationic aryl-cobinamides are described, which were synthesized using the newly developed diaryl-iodonium method. The aryl-cobinamides were obtained as pairs of organometallic coordination isomers, the stereo-structure of which was unambiguously assigned based on homo- and heteronuclear NMR spectra. The availability of isomers with axial attachment of the aryl group, either at the ‘beta’ or at the ‘alpha’ face of the cobalt-center allowed for an unprecedented comparison of the organometallic reactivity of such pairs. The homolytic gas-phase bond dissociation energies (BDEs) of the coordination-isomeric phenyl- and 4-ethylphenyl-cobinamides were determined by ESI-MS threshold CID experiments, furnishing (Co−C )-BDEs of 38.4 and 40.6 kcal mol⁻¹, respectively, for the two β-isomers, and the larger BDEs of 46.6 and 43.8 kcal mol⁻¹ for the corresponding α-isomers. Surprisingly, the observed (Co−C )-BDEs of the Co_β-aryl-cobinamides were smaller than the (Co−C )-BDE of Co_β-methyl-cobinamide. DFT studies and the magnitudes of the experimental (Co−C )-BDEs revealed relevant contributions of non-bonded interactions in aryl-cobinamides, notably steric strain between the aryl and the cobalt-corrin moieties and non-bonded interactions with and among the peripheral sidechains.     

Transition metal allyls : IV. The (η3-allyl)2M complexes of nickel,palladium and platinum: reaction with tertiary phosphines

A series of 1 : 1 adducts have been prepared by treating the bis-η³-allyl complexes of nickel, palladium and platinum with tertiary phosphines. Investigations of their structure in solution as well as in the crystal have shown that both 18-electron (η³-allyl)₂ML complexes as well as 16-electron (η¹-allyl)-(η³-allyl)ML complexes may be formed.     

Scanning force microscopy based rapid force curve acquisition on supported lipid bilayers: experiments and simulations using pulsed force mode.

In situ pulsed force mode scanning force microscopy (PFM-SFM) images of phase separated solid-supported lipid bilayers are discussed with the help of computer simulations. Simultaneous imaging of material properties and topography in a liquid environment by means of PFM-SFM is severely hampered by hydrodynamic damping of the cantilever. Stiffness and adhesion images of solid-supported membranes consisting of cholesterol, sphingomyelin, and 1,2-dioleyl-phosphatidylcholine obtained in aqueous solution exhibit contrast inversion of adhesion and stiff. ness images depending on parameters such as driving frequency, amplitude, and trigger setting. Simulations using a simple harmonic oscillator model explain experimental findings and give a deeper insight into the way PFM-SFM experiments have to be performed in order to obtain interpretable results and hence pave the way for reliable material contrast imaging at high speed.     

How we came to produce C60-fullerite

At the beginning two remarks. One to the nomenclature: Fullerite does not name a specific substance; it names a solid entirely consisting of fullerenes, i.e. closed-cage all-carbon molecules. When our method of synthesis is applied, a solid is obtained in which C₆₀ is the most abundant species. This material may thus be called C₆₀-fullerite. The other remark regarding the production of fullerite: in view of the ease with which this could be achieved, I have the feeling that fullerene molecules must belong to a very frequently overlooked molecular species in carbon chemistry. Since the synthesis is simple and does not require many words to be described, I thought it might be interesting to tell how we came to make fullerite.     

Deoxygenation of supporting electrolytes in stripping voltammetry by glocuse and co-immobilized glocuse oxidase and catalase in a flow system

Carrier solutions for stripping voltammetry in flow systems are deoxygenated by reaction with glucose added to the carrier. The reaction was catalyzed by glocuse oxidase and catalase co-immobilized in an enzyme reactor which was inserted before the injector. The oxygenated was removed at least as efficiently as with nitrogen purging and the voltametric behaviour of cadmium(II), lead(II) and zinc(II) was unaffected by the glucose/gluconic acid system. A particular advantage is the rapid start-up compared to the lengthy purging of carrier solution when nitrogen degassing is used. The enzyme reactor made from porous glass was effective for several months.     

Experimental and theoretical study of the hyperfine structure in the (5d+6s)96p configurations of Pt I

The hyperfine structure of the odd configurations 5d ⁹6p and 5d ⁸6s6p was studied with laser optogalvanic spectroscopy and high resolution interferometry in a platinum hollow cathode. A parametric hyperfine structure analysis for the configurations (5d+6s)⁹6p with 10 excited odd-parity levels was performed for¹⁹⁵Pt. We obtained one-electron hfs parameters,a _5d ⁰¹ =1160(320) MHz,a _6s ¹⁰ =35600(5300) MHz anda _6p ⁰¹ =1300(780) MHz for the configuration 5d ⁸6s6p. The corresponding $\left\langle {r^{ - 3} } \right\rangle _{nl}^{k_s k_l } $ values are compared with those known for other 5d-elements.     

Cationic polymerization of p-substituted α-methylstyrenes. III. Effect of polymerization conditions on tacticity and molecular weight for p-chloro-α-methylstyrene

The cationic polymerization of p-chloro-α-methylstyrene was investigated for the effect of initiator and solvent on polymer tacticity, molecular weight, and molecular weight distribution. The products were generally crystalline polymers of 80–90% syndiotactic content with fairly high molecular weights and broad molecular weight distributions. Tacticities and molecular weight distributions followed similar patterns suggesting that the effect of reaction conditions on ionpair end-group structures was the dominant factor.