Proton conduction in the binary system (1 − x)CsHSeO4–xKHSeO4 studied with a free-energy model

Electrical Impedance Spectroscopy (EIS) was used to study the electrical properties of the (1???x)CsHSeO₄–xKHSeO₄ binary system with concentrations x?=?0.0 and 0.1. The results show a higher proton-conduction phase above 80°C for both concentrations, however, while DC conductivity of CsHSeO₄ shows a gradual change to higher values in the 80–118°C temperature range, the 0.9CsHSeO₄–0.1KHSeO₄ concentration reveals an abrupt change at about 80°C to an intermediate temperature phase. The observed behavior for the doped sample was modeled using a trial free-energy density, based on the concentration of mobile ions, that takes into account the formation of defects, configurational and phonon entropies, and defect-defect interactions. By minimising the free-energy density one obtains two roots for the carrier concentration at a given temperature, which corresponds to a stable and metastable configuration. It is possible to characterise the phase behavior of the system by means of temperature and two model parameters, which depend on the crystalline properties of the system, but not on temperature. One can successfully explain the conductivity behavior of the system by changing the model parameters if it is assumed that its variations are due to the carriers density.     

Luminescent ‘On-Off’ CdSe/ZnS Quantum Dot Chemodosimeter for Hydroxide Based on Photoinduced Electron Transfer from a Carboxylate Moiety

A CdSe-ZnS quantum dot (QD) has been surface functionalised by a place exchange reaction with p-mercaptomethyl benzoate synthesized by a three-step procedure. The resulting lumophore-spacer-receptor QD-conjugate was characterized by IR, UV-visible and fluorescence spectroscopy. The emission profile of the QD reveals a narrow emission peak centred at 542 nm. Addition of hydroxide to the solution containing the QD-conjugate results in quenching of the original fluorescence, which is attributed to a photoinduced electron transfer reaction from the electron-rich benzoate moiety to the QD valence band. This is the first reported example of fluorescent quenching of a CdSe-ZnS QD luminescence by an aryl carboxylate moiety.     

Synthesis of (22R, 25R)-3β,26-Dihydroxy-5α-furostan-6-one #

The synthesis of a plant growth promoter furostanol which bears the characteristic functionality of teasterone on rings A and B is described.

     

Optimisation of sensor positions in random linear arrays based on statistical relations between geometry and performance

Due to the widespread use of acoustic arrays, optimisation techniques for array design, focused on improving array performance, have been widely published. This paper exploits the statistical relation between different measures of sidelobe levels and the spacing of elements in random linear arrays made up of a small number of sensors. This paper defines the methodology to obtain maximum probability functions, associating array geometry and performance. These maximum probability functions allow a pre-selection of those array geometries that are more likely to be associated to specified sidelobe level values. This pre-selection results in a significantly reduced computational burden.     

The Effect of Gluconate and EDTA on Thorium Solubility Under Simulated Cement Porewater Conditions

α-Hydroxy carboxylate ligands like gluconate or polyaminocarboxylate ligands such as ethylenediaminetetraacetate (EDTA) are frequently used in decontamination procedures at nuclear power plants. The presence of these organic substances among nuclear wastes could enhance the solubility of actinides by forming soluble complexes. Thermodynamic data on the stability of gluconate and EDTA with actinides are essential to predict their increase in mobility, especially in high pH systems characteristic of cement environments of a nuclear waste repository. In this work, the solubility of thorium oxyhydroxide in the presence of gluconate and EDTA has been studied. The results highlight the key role of these organics in increasing the solubility of thorium at pH_c = 12. The presence of calcium at concentrations below 10^?2 mol·dm^?3 (characteristic of cement porewaters corresponding to cement compositions at the second degradation stage) does not seem to affect significantly the thorium solubility under the studied conditions.     

Arene C?H Amination at Nickel in Terphenyl–Diphosphine Complexes with Labile Metal–Arene Interactions

The meta‐terphenyl diphosphine, m‐P₂, 1 , was utilized to support Ni centers in the oxidation states 0, I, and II. A series of complexes bearing different substituents or ligands at Ni was prepared to investigate the dependence of metal–arene interactions on oxidation state and substitution at the metal center. Complex (m‐P₂)Ni ( 2 ) shows strong Ni⁰–arene interactions involving the central arene ring of the terphenyl ligand both in solution and the solid state. These interactions are significantly less pronounced in Ni⁰ complexes bearing L‐type ligands ( 2‐L : L=CH₃CN, CO, Ph₂CN₂), Ni^IX complexes ( 3‐X : X=Cl, BF₄, N₃, N₃B(C₆F₅)₃), and [(m‐P₂)Ni^IICl₂] ( 4 ). Complex 2 reacts with substrates, such as diphenyldiazoalkane, sulfur ylides (Ph₂S?CH₂), organoazides (RN₃: R=para‐C₆H₄OMe, para‐C₆H₄CF₃, 1‐adamantyl), and N₂O with the locus of observed reactivity dependent on the nature of the substrate. These reactions led to isolation of an η¹‐diphenyldiazoalkane adduct ( 2‐Ph₂CN₂ ), methylidene insertion into a Ni? P bond followed by rearrangement of a nickel‐bound phosphorus ylide ( 5 ) to a benzylphosphine ( 6) , Staudinger oxidation of the phosphine arms, and metal‐mediated nitrene insertion into an arene C? H bond of 1 , all derived from the same compound ( 2 ). Hydrogen‐atom abstraction from a Ni^I–amide ( 9 ) and the resulting nitrene transfer supports the viability of Ni–imide intermediates in the reaction of 1 with 1‐azido‐arenes.     

A novel approach to measure isotope ratios via multi-collector—inductively coupled plasma—mass spectrometry based on sample mixing with a non-enriched standard

In this work, a novel approach to measure isotope ratios via multi-collector—inductively coupled plasma—mass spectrometry (MC-ICP-MS) for low amounts of target element is proposed. The methodology is based on mixing of the sample (target element isolate) with a non-enriched in-house standard, previously characterized for its isotopic composition. This methodology has been applied to isotopic analysis of Cu and of Fe in whole blood samples. For this purpose, different mixtures of sample + in-house standard were prepared and adjusted to a final concentration of 500 μg/L of the target elements for isotopic analysis. δ⁶⁵Cu, δ⁵⁶Fe, and δ⁵⁷Fe varied linearly as a function of the amount of in-house standard (or of sample) present in the mixture. The isotopic composition of the sample was calculated considering the isotope ratios measured for (i) the mixture and (ii) the in-house standard and (iii) the relative concentrations of target element contributed by the sample and the standard to the mixture, respectively. For validation purposes, the isotopic analysis of whole blood Cu was carried out using both the conventional (using 2 mL of whole blood) and the newly developed approach (using 500 μL of whole blood). The δ⁶⁵Cu values obtained using mixtures containing 40 % (200 μg/L) of Cu from the blood samples and 60 % (300 μg/L) of Cu from the in-house standard were in good agreement with the δ⁶⁵Cu value obtained using the conventional approach (bias ≤0.15?‰).