Side-on bound dinitrogen complex of zirconium supported by a P2N2 macrocyclic ligand

Reduction of [P 2N 2]ZrCl 2 (where P 2N 2 = PhP(CH 2SiMe 2NSiMe 2CH 2) 2PPh) by KC 8 under N 2 generates the dinuclear dinitrogen complex ([P 2N 2]Zr) 2(mu-eta (2):eta (2)-N 2) and impurities in varying yields depending on the solvent and temperature. The toluene complex [P 2N 2]Zr(eta (6)-C 7H 8) along with a dinuclear species with bridging PC 6H 5 groups is observable. Also observable in the crude reaction mixtures is the mu-oxodiazenido derivative, ([P 2N 2]Zr) 2(mu-eta (2):eta (2)-N 2H 2)(mu-O), due to reaction with trace H 2O. This paper reports the full details of the preparation of ([P 2N 2]Zr) 2(mu-eta (2):eta (2)-N 2) including an improved method that involves reduction at low temperatures in a tetrahydrofuran solvent. Also reported is a reproducible synthesis of the oxodiazenido complex along with the X-ray structures of the dinitrogen complex and the oxodiazenido derivative.     

Uncertainty budget for determinations of mean isomer shift from Mössbauer spectra

The magnetite/maghemite content within iron oxide nanoparticles can be determined using the mean isomer shift (\(\overline {\delta }\)). However, accurate characterisation of the composition is limited by the uncertainty associated with \(\overline {\delta }\). We have identified four independent sources of uncertainty and developed a quantitative expression for the uncertainty budget. Sources of uncertainty are categorised as follows: that from the fitting of the Mössbauer spectrum (σ _fit), that of the calibration of the α-Fe reference spectrum (σ _cal), thermal corrections to the spectrum due to second order Doppler shift (SODS) (σ _Δδ ) and other experimental errors (σ _err). Each contribution is discussed in detail using ⁵⁷Fe Mössbauer spectra obtained from an iron oxide nanoparticle system at temperatures between 16 K and 295 K on different spectrometers in two different laboratories.     

Sequential Voltammetric Determination of Uranium,Cadmium and Lead by Using the ex situ Bismuth Film Electrode: Application to Phosphate Fertilizers

A sequential voltammetric procedure for the determination of uranium, cadmium and lead was investigated at an ex situ bismuth film electrode (BiFE). First, the adsorptive stripping voltammetry was applied to assay the U(VI)‐cupferron complex in the differential pulse mode (detection limit of 1.0 µg L^?1, 200 s accumulation time). Through the manipulation of the same aliquot of the sample, efforts were made to quantify cadmium and lead by square wave anodic stripping voltammetry. Detection limits of 2.03 µg L^?1 for Cd (II) and 2.43 µg L^?1 for Pb (II) were calculated (100 s accumulation time). The methodology was successfully applied to phosphate fertilizer samples after open vessel wet decomposition (HNO₃/H₂O₂). The following value ranges were evaluated: U (VI) 37.2–150 mg kg^?1, Pb (II) 78.3–204 mg kg^?1 and Cd (II) 44.1–71.6 mg kg^?1. Validation was performed by using the standard reference materials SRM‐695 – phosphate fertilizer – and SRM‐1643e – water.     

Geometric Achromatic and Pseudoachromatic Indices

The pseudoachromatic index of a graph is the maximum number of colors that can be assigned to its edges, such that each pair of different colors is incident to a common vertex. If for each vertex its incident edges have different color, then this maximum is known as achromatic index. Both indices have been widely studied. A geometric graph is a graph drawn in the plane such that its vertices are points in general position, and its edges are straight-line segments. In this paper we extend the notion of pseudoachromatic and achromatic indices for geometric graphs, and present results for complete geometric graphs. In particular, we show that for n points in convex position the achromatic index and the pseudoachromatic index of the complete geometric graph are \(\lfloor \frac{n^2+n}{4} \rfloor \).     

Solvent effects on two-photon absorption of dialkylamino substituted distyrylbenzene chromophore

Solvent effects on the two-photon absorption of a symmetrical diamino substituted distyrylbenzene chromophore have been studied using the density functional response theory in combination with the polarizable continuum model. It is shown that the dielectric medium has a rather small effect both on the bond length alternation and on the one-photon absorption spectrum, but it affects significantly the two-photon absorption cross section. It is found that both one- and two-photon absorptions are extremely sensitive to the planarity of the molecule, and the absorption intensity can be dramatically reduced by the conformation distortion. It has led to the conclusion that the experimentally observed anomalous solvent effect on the two-photon absorption of dialkylamino substituted distyrylbenzene chromophores cannot be attributed to the intrinsic properties of a single molecule and its interaction with solvents.     

Two-photon absorption of [2.2]paracyclophane derivatives in solution: a theoretical investigation

The two-photon absorption of a class of [2.2]paracyclophane derivatives has been studied using quadratic response and density functional theories. For the molecules investigated, several effects influencing the two-photon absorption spectra have been investigated, such as side-chain elongation, hydrogen bonding, the use of ionic species, and solvent effects, the latter described by the polarizable continuum model. The calculations have been carried out using a recent parallel implementation of the polarizable continuum model in the DALTON code. Special attention is given to those aspects that could explain the large solvent effect on the two-photon absorption cross sections observed experimentally for this class of compounds.     

Neutrons produced by 1.22 GeV antiproton interactions with nuclei

Inclusive neutron energy spectra were measured by time of flight using 1.22 GeV antiprotons from LEAR, CERN, as projectiles and targets from natural Al, Cu, Ag, Ho, Ta, Au, Pb, Bi, U. The sum of two Maxwellian distributions was fitted to the spectra obtained at several forward and backward angles yielding neutron multiplicities M_i and slope or temperature parameters T _i for the low-energy (evaporative, i=1) and high-energy (pre-equilibrium,i=2) parts, respectively. M ₁ increases with A, proportional to the nuclear volume, and M ₂ is growing with A , proportional to the nuclear radius. The T parameters are nearly independent of A. The results are compared with previous multiplicity measurements with a neutron detector, intranuclear cascade calculations and neutron spectra from stopped antiproton annihilation on nuclei. With the measured proton spectra also the ratio of emitted neutrons to protons was determined for Au. Received: 25 February 2000 / Accepted: 19 May 2000     

Development and Validation of a Stability-Indicating UPLC Method for the Determination of Hexoprenaline in Injectable Dosage Form Using AQbD Principles

A novel and efficient stability-indicating, reverse phase ultra-performance liquid chromatographic (UPLC^®) analytical method was developed and validated for the determination of hexoprenaline in an injectable dosage form. The development of the method was performed using analytical quality by design (AQbD) principles, which are aligned with the future requirements from the regulatory agencies using AQbD principles. The method was developed by assessing the impact of ion pairing, the chromatographic column, pH and gradient elution. The development was achieved with a Waters Acquity HSS T3 (50 × 2.1 mm i.d., 1.8 µm) column at ambient temperature, using sodium dihydrogen phosphate 5 mM + octane-1-sulphonic acid sodium salt 10 mM buffer pH 3.0 (Solution A) and acetonitrile (Solution B) as mobile phases in gradient elution (t = 0 min, 5% B; t = 1 min, 5% B; t = 5 min, 50% B; t = 7 min, 5% B; t = 10 min, 5% B) at a flow rate of 0.5 mL/min and UV detection of 280 nm. The linearity was proven for hexoprenaline over a concentration range of 3.50–6.50 µg/mL (R² = 0.9998). Forced degradation studies were performed by subjecting the samples to hydrolytic (acid and base), oxidative, and thermal stress conditions. Standard solution stability was also performed. The proposed validated method was successfully used for the quantitative analysis of bulk, stability and injectable dosage form samples of the desired drug product. Using the AQbD principles, it is possible to generate methodologies with enhanced knowledge, which can eventually lead to a reduced regulatory risk, high quality data and lower operational costs.     

X‐Ray Photoelectron Spectral Studies on Planar NiS4 and NiS2P2 Chromophores. Single Crystal X‐Ray Structural Study on [1, 4‐Bis(diphenylphosphino‐k,P, P')butane](piperidinecarbodithioato‐S,S')‐Nickel(II) Perchlorate

X‐ray photoelectron spectral study was made on the complexes Ni(nmedtc)₂( 1 ), [Ni(nmedtc)(PPh₃)₂]ClO₄( 2 ), [Ni‐(nmedtc)(dppe)]BPh₄( 3 ) (where nmedtc = N‐methyl, N‐ethanoldithiocarbamate, dppe = 1, 2‐bis(diphenylphosphino)ethane). The nickel 2p_3/2 binding energy values for chelated and free phosphine complexes are 854.0 and 854.1 eV which are significantly different from Ni2p_3/2 BE value of NiS₄ chromophore, indicating the relative dearth of electron density on Ni in NiS₂P₂ chromophores. The presence of two phosphine groups in NiS₂P₂ chromophore alleviates the electron density on the metal atom. More electron density is being pulled away from the metal atom in chelates than in the PPh₃ analogue. This observation is in line with solution studies by cyclic voltammetry. A one‐electron reduction potential was observed to be the minimum for NiS₂P₂ chromophores compared to the others. Also the crystal structure of the complex [Ni(pipdtc)(1, 4‐dppb)]ClO₄ (pipdtc^‐ = piperidinecarbodithioato anion, 1, 4‐dppb = bis(diphenylphosphino)butane) prepared by the reaction between Ni(pipdtc)₂, NiCl₂�6₂2O, and 1, 4‐dppb in CH₃CN‐CH₃OH is reported.