Sample preparation for metalloprotein analysis: A case study using horse chestnuts

In the present work, 11 different procedures for protein and metalloprotein extraction from horse chestnuts (Aescullus hippocastanum L.) in natura were tested. After each extraction, total protein was determined and, after protein separation through sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE), those metals belonging to the protein structure were mapped by synchrotron radiation X-ray fluorescence (SRXRF). After mapping the elements (Cr, Fe and Mn) in the protein bands (ca. 33 and 23.7 kDa), their concentrations were determined using atomic absorption spectrometry (ET AAS).

Good results were obtained for protein extraction using a combination of grinding and sonication. However, this strategy was not suitable to preserve metal ions in the protein structure. In fact, there was 42% decrease on Mn concentration using this procedure, compared to that performed with sample agitation in water (taken as reference). On the other hand, when grinding and agitation with an extracting buffer was used, there was a 530% increase of Mn concentration, when compared to the reference procedure.

These results indicate agreement between metal identification and determination in proteins as well as the great influence of the extraction procedure (i.e., the sample preparation step) for preserving metals in the protein structures.     

The influence of the brewing process on the formation of biogenic amines in beers

Biogenic amines, as dabsyl derivatives, were determined in beer samples, intermediate products, and raw materials (malt and maize) by HPLC. A procedure for the extraction of the amines from malt and maize with diluted hydrochloric acid was optimised by combining a Response Surface Methodology with a Simultaneous Decision Making Approach. The results of the analysis indicate that, in brewing, technology and hygiene are the decisive factors that determine the amine concentrations in the final product.     

The importance of nonconventional structures in the binding of Ni<Superscript>+</Superscript> to ethynylsilanes and ethynylgermanes

The influence of the nature of the heteroatom on the Ni⁺ gas-phase binding energies of HCC–XH₃ (X is C, Si, or Ge) compounds has been investigated through the use of high-level density functional theory methods. The structures of the corresponding Ni⁺ complexes were optimized at the B3LYP/6-311G(d,p) level of theory. Final energies were obtained in single-point B3LYP/6-311+G(2df,2p) calculations. Nonconventional complexes, in which the metal cation interacts simultaneously with the CC system and with one of the X–H bonds of the substituent XH₃ group, play a significant role in the binding of Ni⁺ to HCC–XH₃ (X is Si or Ge) derivatives. Conversely, such nonconventional complexes are not local minima of the propyne–Ni⁺ potential-energy surface. This establishes a clear distinction between unsaturated carbon derivatives and the Si- and Ge-containing analogues as far as bonding to transition-metal monocations is concerned. Actually, the attachment of Ni⁺ to HCC–XH₃ (X is Si or Ge) compounds in the gas phase yields a mixture of conventional and nonconventional complexes. These agostic-type interactions can be viewed as a dative bond from the X–H bonding orbital toward the empty s orbital of the metal, and a back-donation from the valence electron pairs of the metal into the X–H antibonding orbital of the neutral species.Proceedings of the 11th International Congress of Quantum Chemistry satellite meeting in honor of Jean-Louis Rivail     

Technological quality determination of pharmaceutical disintegrant by DSC cooling and DSC photovisual

A number of disintegrants are available on the market. They improve tablets’ disintegration. The objective of this work is the comparison of the technological quality parameters of disintegrants using different analytical techniques. Three batches of disintegrants and their binary mixtures (water:disintegrants) were investigated. Cooling experiments were used from –30 up to 200°C. The data obtained showed calorimetric differences between the samples. In the binary mixtures water showed different crystallization behaviour from the one found in the literature. According to the results DSC technique helped the quality control of different disintegrants.     

Self-organization of a sulfonamido-porphyrin in Langmuir monolayers and Langmuir-Blodgett films

Langmuir monolayers (LM) and Langmuir-Blodgett (LB) films of pure lipophilic meso-tetra(4-dodecylaminosulfophenyl)porphyrin (PC12) and mixed with the anionic surfactant sodium hexadecylsulfate (SHS) were studied. The molecular packing and structure of PC12 and PC12-4SHS with variable surface pressure were investigated by surface pressure-area measurements, steady-state absorption, fluorescence emission and anisotropy, as well as by fluorescence lifetime imaging microscopy (FLIM). At low surface pressure, the porphyrin molecules are organized with the rings tilted on the water surface whereas at high surface pressure the porphyrin rings achieve a more perpendicular arrangement. Using the FLIM images a gradual change of aggregates into large "islands" is observed. Different patterns are observed in the pure PC12 multilayer films (n = 3 and 5) with ordered patches superimposed which are not observed in the PC12-4SHS multilayer LB films.     

Physicochemical study of ovalbumin in the presence of sodium dodecyl sulphate in aqueous media

The interactions of sodium dodecyl sulphate with ovalbumin in aqueous solution at room temperature are described for a wide concentration range of both substances. A phase diagram covering a wide range of concentrations shows a total of five different morphologies. Dynamic light scattering of the samples from each morphology offered better understanding of the different structures (between three and four) present in the solution. The amount of ovalbumin present in the solution was confirmed with differential scanning spectroscopy, while the interactions between sodium dodecyl sulphate and ovalbumin were interpreted by zeta potential and electrical conductivity measurements.     

Preconcentration of heavy metals ions from aqueous solutions by means of cellulose phosphate: an application in water analysis

Cellulose phosphate (CELLPHOS) was studied as a collector for analytical preconcentration of traces of Cd(II), Cr(III), Cu(II) and Ni(II) from aqueous sample solution. It has been proved that using chromatographic columns packed with CELLPHOS for preconcentration and 1.0 mol 1(-1) HCl for elution the adsorbed analytes are quantitatively enriched. An enrichment factor of 20 (100 ml sample, 5 ml concentrate) was achieved by this separation procedure, which was applied to a series of water analyses (river, sea, bog water).     

Multicommuted flow-through fluorescence optosensor for determination of furosemide and triamterene

Multicommutation implemented with flow-through optosensors is a very promising area of research. This recent approach benefits from the advantages of both methods and results in high sensitivity, selectivity, and speed, and little waste generation. This paper reports the simultaneous determination of furosemide and triamterene, two widely used diuretics, by measurement of their native fluorescence. The system has been proved to be useful for determination of both analytes in pharmaceutical preparations and for determination of triamterene in human urine and serum. A minicolumn filled with Sephadex SPC-25 microbeads was used to achieve separation of both analytes before detection in a flow-through cell filled with the same resin. The sensor is linear in the range 50–1200 and 0.4–8 ng mL⁻¹ with detection limits of 15 and 0.1 ng mL⁻¹ for furosemide and triamterene, respectively.     

Application of Task-specific Ionic Liquids for Intensified Separations

Summary. Ionic liquids offer tremendous opportunities to intensify reactions and separations in process technologies by tuning their physical and chemical properties. Several ionic liquids are suitable for the separation of aromatic and aliphatic hydrocarbons. CO₂ absorption behavior was influenced by the functionalized chains appended to the room temperature ionic liquid (RTIL) cation. Ionic liquids seem able to combine the chemical features of amine solutions with the characteristic advantages of the physical solvents used for CO₂ absorption.