Chemoselective Removal of Acyloxy in 1-(Benzotriazole-1-yl)alkyl Esters and Its Application in the Preparation of β-(Benzotriazole-1-yl)alcohols

Mediated by samarium diiodide, 1-(benzotriazole-1-yl)alkyl esters 1 underwent cross-coupling with aldehydes or ketones to afford β-(benzotriazole-1-yl)alcohols 2 exclusively with the selective removal of acyloxy over benzotriazolyl.     

Thermal and thermo-oxidative degradation of high density polyethylene/fullerene composites

Fullerene (C₆₀)/high density polyethylene (HDPE) composites were studied in order to understand for their behaviors on thermal and thermo-oxidative degradation. Under different atmosphere, the influences of C₆₀ on the thermal stability of HDPE are different. Thermogravimetric analysis coupled to Fourier transform infrared spectroscopy (TG-FTIR) and pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS) demonstrate that in N₂ the addition of C₆₀ increases the onset decomposition temperature by about 10 °C with more heavy compounds (more than 34 carbon). Also the thermal stability of HDPE in air is remarkably improved with the addition of C₆₀. When the content of C₆₀ is 2.5 wt% the onset decomposition temperature increases by about 91 °C. The results of viscoelastic behavior and gel content reveal that C₆₀ can trap the alkyl radicals and alkyl peroxide radicals to inhibit hydrogen abstraction to suppress the chain scission and preserve the long chain structure. However, in the absence of C₆₀ or with low C₆₀ concentration, hydrogen abstraction occurs, resulting in the formation of a series of alkyl radicals and alkyl peroxide radicals, which accelerates the chain scission and plays a leading role in the thermal oxidative degradation.     

Improved staining of phosphoproteins with high sensitivity in polyacrylamide gels using Stains‐All

An improved Stains‐All (ISA) staining method for phosphoproteins in SDS‐PAGE was described. Down to 0.5–1 ng phosphoproteins (α‐casein, β‐casein, or phosvitin) can be successfully selectively detected by ISA stain, which is approximately 120‐fold higher than that of original Stains‐All stain, but is similar to that of commonly used Pro‐Q Diamond stain. Furthermore, unlike the original Stains‐All protocol that was time consuming and light unstable, ISA stain could be completed within 60 min without resorting to protect the gels from light during the whole staining procedure. According to the results, it is concluded that ISA stain is a rapid, sensitive, specific, and economic staining method for a broad application to the research of phosphoproteins.     

Synthesis of aromatic diamine-based benzoxazines and effect of their backbone structure on thermal and flammability properties of polymers

Three kinds of novel aromatic diamine-based benzoxazines containing naphthalene, propane-2,2-diyldibenzene and neopentyl groups in the backbone, respectively (designated as BAPNCP, BAPBACP and BAPNPGCP, respectively), were synthesized and characterized. In addition, the effects of backbone structures on curing behaviors of the monomers and thermal and flammability properties of the resulting polymers were systematically studied. The results indicated that BAPNPGCP displayed the highest enthalpy of the curing reaction associated with the ring-opening of benzoxazine, which was due to the effect of benzoxazine ring content per unit mass. Interestingly, the 5 wt% weight loss temperature and char residue after thermogravimetric test for poly(BAPNPGCP) were 8 °C and 7% higher than those of poly(BAPBACP). Meanwhile, the total heat release of poly(BAPNPGCP) was less than half of that for poly(BAPBACP), indicating the substantial effect of benzoxazine ring content on flammability and char formation. Furthermore, it was found that poly(BAPNCP) gave the best thermal stability and flame retardancy, which was due to the synergistic effect between naphthalene group and benzoxazine ring content. This study provides new insight into the curing behavior of benzoxazine and further understanding on the high performance of polybenzoxazine.     

Liquid crystalline behaviour of hydrazide derivatives containing alkoxyazobenzene

Two series of dissymmetric hydrazide derivatives containing alkoxyazobenzene with nitro terminal group and octyloxy terminal group, N-4-alkoxyphenyl-N′-4-((4-nitrophenyl)azophenyl) benzohydrazide (Bn-NO₂, n indicates the number of carbon atoms) and N-4-octyloxyphenyl-N′-4-((4-octyloxyphenyl)azophenyl) benzohydrazide (B8-B8), were designed and synthesised, and their liquid crystalline properties were investigated by means of differential scanning calorimetry, polarised optical microscopy and wide-angle X-ray diffraction. It was found that B8-B8 with octyloxy terminal chains displayed monolayer smectic C phase, whereas Bn-NO₂ with nitro terminal group displayed SmA_d phase, and intermolecular hydrogen bonding was confirmed as the driving force. In addition, the effect of hydrogen bonding, dipole–dipole interactions and steric hindrance effect on the liquid crystalline structures were also discussed.     

Comprehensive characterisation of the E phase of 6-octyl-2-phenylazulene

Molecular dynamics in the soft crystal, E phase of 6-octyl-2-phenylazulene was studied by X-ray diffraction, and dielectric and Fourier transform infrared spectroscopies. Clear dielectric dispersion is observed due to the head-to-tail disordering in a kHz range around 400 K. The CH stretching frequencies exhibit more pronounced shifts at the phase transition point from the high-temperature ordered crystal to the E phase than that at the melting from the E phase to the isotropic liquid. The results are discussed in comparison with a typical E series, 4-n-alkyl-4′-isothiocyanatobiphenyl (n being the number of carbon atoms in the alkyl group).     

Preparation of cellulose I nanowhiskers with a mildly acidic aqueous ionic liquid: reaction efficiency and whiskers attributes

Cellulose I nanowhiskers were prepared in relatively high yield (48 ± 2 %) by single-stage hydrolysis of microcrystalline cellulose with an aqueous solution of 1-butyl-3-methylimidazolium hydrogen sulfate ([Bmim]HSO₄). This reaction occurred under mildly acidic reaction conditions with an [H⁺]/[AGU] ratio of 0.24 mol/mol, i.e., 2 orders of magnitude lower than with concentrated sulfuric acid. The nanowhiskers exhibited small width and width distribution and also smaller length than nanowhiskers obtained with concentrated acid. With a relatively low content of sulfur they also exhibited higher thermal stability than whiskers obtained with concentrated sulfuric acid. The lower solvating power of the aqueous ionic liquid compared to that of concentrated sulfuric acid likely contributes to the greater hydrolysis efficiency in the present system.     

Highly efficient N-glycoproteomic sample preparation by combining C18 and graphitized carbon adsorbents

Conventional N-glycoproteome analysis usually applies C₁₈ reversed-phase (RP) adsorbent for sample purification, which will lead to unavoidable sample loss due to the high hydrophilicity of N-glycopeptides. In this study, a porous graphitized carbon (PGC) absorbent was combined with a C₁₈ adsorbent for N-glycopeptide purification in comprehensive N-glycoproteome analysis based on the hydrophobic and polar interactions between carbon and N-glycans. It was observed that the small hydrophilic N-glycopeptides that cannot retain onto C₁₈ adsorbent can be captured by the graphitized carbon, while the large hydrophobic N-glycopeptides that cannot retain onto the graphitized carbon can be feasibly captured by the C₁₈ adsorbent. Comparing with sample purification by using C₁₈ adsorbent only, 28.5 % more N-glycopeptides were identified by combining both C₁₈ and PGC adsorbents. The C₁₈-PGC strategy was further applied for both sample purification and pre-fractionation of a complex protein sample from HeLa cell. After hydrophilic interaction chromatography enrichment, 1,484 unique N-glycopeptides with 1,759 unique N-glycosylation sites were finally identified.

研究性与系统性相结合的有机合成实验教学实践

为了培养学生的创新能力和实践能力,使学生较全面地掌握有机合成实验理论知识和实验技能,开展了有机合成实验研究性和系统性结合的教学探索和实践。在课程建设和教学过程中,贯彻以学生为主体的教学改革思路与方法。从教学内容和模式、授课方式、考核方式等多个教学环节进行探索研究,科教融合,结合实际课堂教学,倡导启发式教学方法。研究型教学模式的实施有效地调动了学生自主研究性学习的积极性,有利于提高学生的综合实践能力,促进实验教学与科学研究的衔接。