Reversed-phase liquid chromatography and argentation chromatography of the minor capsaicinoids

An investigation of the liquid chromatography of the minor capsaicinoids in a commercial capsaicinoid mixture is reported. Twelve stationary phases including C₈, C₁₈, C₃₀, phenyl, and cation-exchange chemistries were examined in combination with isocratic aqueous methanol and aqueous acetonitrile mobile phases. A phenyl stationary phase and aqueous acetonitrile mobile phase baseline-resolved 7 of 11 capsaicinoids, and selected ion chromatograms (LC–ESI-MS) demonstrated this was the most effective reversed-phase separation. Argentation chromatography with an alkyl or phenyl column and aqueous silver nitrate–methanol mobile phase revealed the presence of the 6-ene-8-methyl and 6-ene-9-methyl homocapsaicin isomers and the absence of 7-ene-9-methyl homocapsaicin. A mixed phenyl–cation-exchange stationary phase (charged with silver ion) enabled unique and useful separations of the capsaicinoids.     

A chemical inhibitor reveals the role of Raf kinase inhibitor protein in cell migration

Raf kinase inhibitor protein (RKIP) is a modulator of cell signaling that functions as an endogenous inhibitor of multiple kinases. We demonstrate here a positive role for RKIP in the regulation of cell locomotion. We discovered that RKIP is the relevant cellular target of locostatin, a cell migration inhibitor. Locostatin abrogates RKIP's ability to bind and inhibit Raf-1 kinase, and it acts by disrupting a protein-protein interaction, an uncommon mode of action for a small molecule. Small interfering RNA-mediated silencing of RKIP expression also reduces cell migration rate. Overexpression of RKIP converts epithelial cells to a highly migratory fibroblast-like phenotype, with dramatic reduction in the sensitivity of cells to locostatin. RKIP is therefore the compound's valid target and a key regulator of cell motility.     

Use of CF3,Br/Al,discharges for reactive ion etching of III-V semiconductors

The reactive ion etching of GaAs, InP, InGaAs, and InAlAs in CF₃Br/Ar discharges was investigated as a function of both plasma power density (0.56-1.3 W - cm^–2) and total pressure (10-40 mTorr) The etch rate of GaAs in 19CF₃Br:1Ar discharges at 10 m Torr increases linearly with power density, from 600 Å min^–1 at 0.56 W · cm^–2, to 1550 Å · min at 1.3 W · cm^–2. The in-based materials show linear increases in etch rates only for power densities above – 1.0 W · cm^–2. These etch rates are comparable to those obtained with CCI₂F₂:O₂ mixtures under the same conditions. Smooth surface morphologies and vertical sidewalls are obtained over a wide range of plasma parameters. Reductions in the near-surface carrier concentration in n-type GaAs are evident for etching with power densities of >0.8 W cm^–2, due to the introduction of deep level trapping centers. At 1.3 W· cm^–2, the Schottky barrier height of TiPtAu contacts on GaAs is reduced from 0.74 to 0.53 eV as a result of this damage, and the photoluminescent intensity from the material is degraded. Alter RIE, we detect the presence of both F and Br on the surface of all of the semiconductors. This contamination is worse than with CCl₂F₂-based mixtures. High-power etching with CF₃Br/Ar together with Al-containing electrodes can lead to the presence of a substantial layer of aluminum oxide on the samples if the moisture content in the reactor is appreciable.     

Theoretical description of pressure shifts and quenching of excited atomic states in liquid helium

The pressure dependence of the linewidth and shift for the 2 ³S→2 ³P and 3 ³S→2 ³P transitions observed in electron-bombarded liquid helium is calculated by applying static line-broadening theory within the framework of a theoretical model. The calculated pressure shift, width and asymmetry are in good agreement with recent measurements over the pressure range of 1 to 25 atm. A new mechanism is proposed for the strong pressure quenching observed for several atomic and molecular emission lines.     

Calculated electronic transitions in sulfuric acid and implications for its photodissociation in the atmosphere

We have calculated electronic transitions for sulfuric acid in the ultraviolet region using a hierarchy of coupled cluster response functions and correlation consistent basis sets. Our calculations indicate that the lowest energy singlet transition occurs at 8.42 eV with an oscillator strength of 0.01. The lowest energy triplet state occurs at 8.24 eV. Thus, the cross section of sulfuric acid in the actinic region is likely to be very small and smaller than the upper limit put on this cross section by previous experimental investigations. We estimate the cross section of sulfuric acid in the atmospherically relevant Lyman-alpha region ( approximately 10.2 eV) to be approximately 6 x 10 (-17) cm (2) molecule (-1), a value approximately 30 times larger than the speculative value used in previous atmospheric simulations. We have calculated the J values for photodissociation of sulfuric acid with absorption of visible, UV, and Lyman-alpha radiation, at altitudes between 30 and 100 km. We find that the dominant photodissociation mechanism of sulfuric acid below 70 km is absorption in the visible region by OH stretching overtone transitions, whereas above 70 km, absorption of Lyman-alpha radiation by high energy Rydberg excited states is the favored mechanism. The low lying electronic transitions of sulfuric acid in the UV region do not contribute significantly to its dissociation at any altitude.     

Analysis of polycyclic aromatic hydrocarbons (PAHs) in environmental samples: a critical review of gas chromatographic (GC) methods

Polycyclic aromatic hydrocarbons (PAHs) are frequently measured in the atmosphere for air quality assessment, in biological tissues for health-effects monitoring, in sediments and mollusks for environmental monitoring, and in foodstuffs for safety reasons. In contemporary analysis of these complex matrices, gas chromatography (GC), rather than liquid chromatography (LC), is often the preferred approach for separation, identification, and quantification of PAHs, largely because GC generally affords greater selectivity, resolution, and sensitivity than LC. This article reviews modern-day GC and state-of-the-art GC techniques used for the determination of PAHs in environmental samples. Standard test methods are discussed. GC separations of PAHs on a variety of capillary columns are examined, and the properties and uses of selected mass spectrometric (MS) techniques are presented. PAH literature on GC with MS techniques, including chemical ionization, ion-trap MS, time-of-flight MS (TOF-MS), and isotope-ratio mass spectrometry (IRMS), is reviewed. Enhancements to GC, for example large-volume injection, thermal desorption, fast GC, and coupling of GC to LC, are also discussed with regard to the determination of PAHs in an effort to demonstrate the vigor and robustness GC continues to achieve in the analytical sciences.     

On-line on-chip post-column derivatisation reactions for pre-ionisation of analytes and cluster analysis in gradient micro-liquid chromatography/electrospray mass spectrometry

A system is presented that demonstrates the principle of on-line and on-chip post-column derivatisation reactions in micro-high-performance liquid chromatography (micro-HPLC) hyphenated to electrospray time-of-flight mass spectrometry (ESI-TOFMS). In this micro-HPLC-chip-MS set-up, the analytes are separated using gradient micro-HPLC and subsequently derivatised on-chip and detected. One of the major limitations of MS detection is its dependency on the degree of ionisation, which is widely variable and compound-specific. Optimising and controlling the degree of ionisation in a simple manner would allow MS detection to be truly generic. One way of achieving this is by pre-ionisation of analytes using simple derivatisation procedures that are both rapid and quantitative. Performing this in situ on the system described here overcomes issues of sample handling and efficiency losses when time-consuming "bench chemistry" is necessary prior to analysis. The power of the system is demonstrated by the separation of primary and secondary amines, which are subsequently derivatised with a positively charged phosphonium complex and detected in an enhanced manner. Typically, molecular cations (M(+)) are detected showing that the ionisation process is dominated by the phosphonium species, leading to more constant ionisation for a variety of compounds. In addition, stable isotopically labelled ((12)C/(13)C)-phosphonium reagent is used for the reactions, allowing for inherent signal/noise (S/N) improvement and automated data processing using cluster analysis. A similar reaction scheme is used for the derivatisation of ketones and aldehydes, also demonstrating dramatic increases in sensitivity, especially with increasing temperature. Minimal loss in chromatographic fidelity in terms of retention times is observed by the introduction of the micromixer chip into the system. Optimal flow rates in micro-HPLC and ESI-MS are compatible with flow rates for the chip as well as a multitude of in-line optical detectors including UV and fluorescence. In addition, the micromixer chip can be positioned pre-column if preferred. The system is robust, easily fully automated and applicable to a wide variety of reactions. The system has a major advantage in its simple robust connection to the "normal scale" outside world.     

Two new marine sediment standard reference materials (SRMs) for the determination of organic contaminants

Two new marine sediment standard reference materials (SRMs), SRM 1941b Organics in Marine Sediment and SRM 1944 New York/New Jersey Waterway Sediment, have been recently issued by the National Institute of Standards and Technology (NIST) for the determination of organic contaminants including polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyl (PCB) congeners, and chlorinated pesticides. Both sediment SRMs were analyzed using multiple analytical methods including gas chromatography/mass spectrometry (GC/MS) on columns with different selectivity, reversed-phase liquid chromatography with fluorescence detection (for PAHs only), and GC with electron capture detection (for PCBs and pesticides only). SRM 1941b has certified concentrations for 24 PAHs, 29 PCB congeners, and 7 pesticides, and SRM 1944 has certified concentrations for 24 PAHs, 29 PCB congeners, and 4 pesticides. Reference concentrations are also provided for an additional 58 (SRM 1941b) and 39 (SRM 1944) PAHs, PCB congeners, and pesticides. SRM 1944, which was collected from multiple sites within New York/New Jersey coastal waterways, has contaminant concentrations that are generally a factor of 10–20 greater than SRM 1941b, which was collected in the Baltimore (Maryland) harbor. These two SRMs represent the most extensively characterized marine sediment certified reference materials available for the determination of organic contaminants.Electronic Supplementary Material Supplementary material is available in the online version of this article at . A link in the frame on the left on that page takes you directly to the supplementary material.     

Derivatisation for liquid chromatography/electrospray mass spectrometry: synthesis of pyridinium compounds and their amine and carboxylic acid derivatives

A simple method has been developed for the pre-column derivatisation of low molecular weight primary and secondary amines and carboxylic acids using quaternary nitrogen compounds to enhance their detection by liquid chromatography/electrospray ionisation mass spectrometry (LC/ESI-MS). The synthesis of seven novel quaternary nitrogen reagents is described. The derivatives are designed to be relatively small molecules to avoid some of the steric hindrance problems that may be associated with larger derivatisation reagents. The compounds have amine and carboxylic acid functional groups with which to derivatise carboxylic acids and amines, respectively. Two of the compounds contain a bromine atom in order to assess the advantages of a bromine isotope pattern in the mass spectra. This acts as a simple marker for derivatisation and enables data processing by cluster analysis.Activation of the carboxylic acid group was achieved by the use of either 1-chloro-4-methylpyridinium iodide (CMPI) or the more reactive 1-fluoro-4-methylpyridinium p-toluenesulphonate (FMP).1 Using both of these active reagents, the degree of nucleophilic substitution was investigated for the derivatisation of a variety of small molecules. Whilst giving some increase in the ESI-MS response for the derivatised compounds, the FMP itself acted as a derivatising reagent in a competing reaction. In the light of this finding, FMP was reacted with the test compounds separately and gave positive results as a derivatising reagent. Detection of the 'pre-charged' derivatives of amines and carboxylic acids by LC/ESI-MS was investigated with respect to their ESI response and chromatography.