Synthesis and structural identification of a highly ordered mesoporous organosilica with large cagelike pores

Using 1,2-bis(trimethoxysilyl)ethane as organosiloxane precursor and a triblock copolymer surfactant, Pluronic F127, as template, a highly ordered mesoporous organosilica with large cagelike pores has been successfully synthesized. Its structure was resolved to be 3-D cubic Fmm by high-resolution transmission electron microscopy. The intergrowth of hexagonal close-packed and cubic close-packed phases was observed in this material. The effect of different siliceous precursors on the mesostructure was also investigated.     

Analysis of organotin compounds by grignard derivatization and gas chromatography-ion trap tandem mass spectrometry

The determination of organotin compounds in water using gas chromatography-tandem mass spectrometry (GC-MS-MS) is described. Several organotin derivatives were synthesized by the reaction of organotin chlorides with Grignard reagents such as methyl-, propyl- and pentylmagnesium halides. After the optimization of the GC-MS-MS conditions, several derivatizations with the Grignard reagents were compared by evaluating the molar responses and volatilities of the derivatives and derivatization yields. As a result, the derivatizing reagent of choice is pentylmagnesium bromide. Calibration curves for the mono-, di- and tributyltins and mono-, di- and triphenyltins with pentylmagnesium bromide were linear in the range of 0.5-100 pg of Sn. The instrumental detection limits of six organotins ranged from 0.20 to 0.35 pg of Sn. The recovery tests from water samples (500 ml) were performed by using sodium diethyldithiocarbamate (DDTC) as a complexing reagent. Except for monophenyltin, the absolute recoveries of organotins from pure water at 200 ng of Sn/l were satisfactory. The recoveries calibrated by surrogate compounds (perdeuterated organotin chlorides) ranged from 71 to 109%. The method detection limits ranged from 0.26 to 0.84 pg of Sn (500-ml sample). This method was applied to the recovery of organotins from river water and seawater. The calibrated recoveries were between 90 and 122%.     

Co-C bond dissociation energy and reaction volume change of 2',5'-dideoxyadenosylcobalamin studied by laser-induced time-resolved photoacoustic calorimetry

Time resolved photoacoustic calorimetry (PAC) was applied to a study of the photolysis of a coenzyme B(12) analog 2',5'-dideoxyadenosylcobalamin, which lacks an -OH group at the 2' position of ribofuranose ring. In aqueous solution, we report for the first time the quantum yield Phi(d) (0.25+/-0.02), Co-C bond dissociation energy (BDE; 31.8+/-2.5 kcal mol(-1)) and reaction volume change deltaV(R) (6.5+/-0.5 ml mol(-1)) due to conformation changes of the corrin ring and its side chains accompanying the cleavage of the Co-C bond. These values for the analog are very similar to those for the natural cofactor. Based our results and previous studies, a possible explanation for the similarity in their structure and properties versus the large difference in their enzymatic activity is discussed.     

Photocrosslinking of functionalized rubber. II. Photoinitiated cationic polymerization of epoxidized liquid natural rubber

Low molecular weight epoxidized natural rubber has been crosslinked within seconds by UV irradiation in the presence of a triarylsulfonium salt. The photoinitiated cationic ring-opening polymerization was studied quantitatively by infrared spectroscopy and shown to proceed with surprisingly long kinetic chains in such solid medium. The high conversion (60%) needed for complete insolubilization, together with the presence of tetrahydrofuran structures, argue in favor of an intramolecular polymerization process involving neighboring epoxy groups. The photoinitiator concentration has a strong influence on the rate and extent of the reaction, as well as on the depth of cure profile. Because of an efficient dark process, close to 100% conversion was reached upon storage of the irradiated elastomer at ambient, with a concomitant increase of the gel fraction and the polymer hardness. The grafting of pendent acrylate groups onto the polymer chain leads to a three-fold decrease of the initial rate of polymerization of the epoxide. The photocuring of natural rubber bearing both epoxy and acrylate groups generates a dual polymer network which combines the properties of the two moieties. © 1995 John Wiley & Sons, Inc.     

An Investigation on the Production of Random Copolymer with Monothiocarbonate and Trithiocarbonate Units over Cyclic Thiocarbonate via Metal‐free Catalysis

Synthesis of poly(thiocarbonate)s from the copolymerization of epoxides and carbon disulfide (CS₂) remains a tough challenge, due to inevitable oxygen‐sulfur atom scrambling process. In this work, we utilized the oxygen‐sulfur exchange reaction (O‐S ER) to synthesize a random copolymer with monothiocarbonate and trithiocarbonate units from CS₂ and phenyl glycidyl ether (PGE) via metal‐free Lewis pairs. The copolymers contained monothiocarbonate and trithiocarbonate units of which the molar fraction could be tuned by varying either the types of Lewis pairs or the reaction temperature. Keeping track on the intermediate provided an insight in the process of O‐S ER and thus gave a hint to control the product structure. Production and consumption of phenyl thioglycidyl ether was the key process to regulate the chain structure. Remarkably, the oxygen atoms of PGE could be excluded out of the chain, resulting in the nearly complete production of poly(trithiocarbonate)s. Correspondingly, the refractive index of this kind of copolymer could be regulated in a wide range of 1.73—1.79 (at 590 nm).     

Synthesis of a Novel Type of Phosphates of Puerarin

A novel type of phosphated puerarin derivatives were synthesized through a simplified Atheron‐Todd reaction for the first time. The structure of these compounds were elucidated by IR, ESI‐MS and NMR. Moreover, the reason the dialkylphophite reagent had different chemselectivities toward different hydroxys on the puerarin was discussed.     

Synthesis of N,N-diethyldithiocarbamate functionalized 1,4-polyisoprene, from natural rubber and synthetic 1,4-polyisoprene

N,N-Diethyldithiocarbamate functionnalized 1,4-polyisoprenes were prepared from 1,4-polyisoprenes (natural or synthetic). The syntheses were performed by nucleophilic addition of N,N-diethyldithiocarbamate salts upon oxirane rings of epoxidized units according to a SN2 mechanism with ring opening. Studies on model molecules of epoxidized 1,4-polyisoprene units (1,2-epoxy-1-methylcyclohexane and 4,5-epoxy-4-methyloctane) were previously achieved to develop the procedure. The best yields were obtained at low temperature in polar medium, and more especially in water with sodium N,N-diethyldithiocarbamate (DEDT-Na) as reagent. A diastereospecific addition was noted when reaction was performed in water with DEDT-Na. Afterwards, the developed procedure was successfully generalized to epoxidized synthetic polyisoprenes and epoxidized natural rubber (in THF, then in latex medium). Excellent results were obtained in latex medium with epoxidized natural rubber (ENR) latices. As with the models, a diastereospecific addition of sodium N,N-diethyldithiocarbamate trihydrate onto epoxidized 1,4-polyisoprene units of ENR was observed at the condition to bring the latex medium to pH 8 before introduction of DEDT-Na. Influence of temperature, drc, and DEDT-Na concentration were successively examined to determine the best conditions of the addition on ENR latices.     

Adsorption of dyes on activated carbon and graphitic thermal carbon black

The adsorption of a basic dye (Methylene Blue; MB) and an acidic dye (Acid Orange; AO) has been studied on three activated carbons (ACs; FAS, SKD, and BAU) significantly differing in their porous structures and surface concentrations of ion-exchange groups and on graphitic thermal carbon black (GTCB). The effective specific surface area of FAS, SKD, and BAU determined by dye adsorption is, respectively, 60, 50, and 40% of the BET nitrogen adsorption surface area. The MB uptake on ACs and GTCB increases with rising pH, while the AO uptake decreases. Addition of an electrolyte (0.3 M NaCl) virtually does not effect the adsorption of dyes on ACs and GTCB. It is suggested that hydrophobic interactions, and not ionic ones, are the major contributors to the adsorption of dyes on ACs.     

Research on 1-azabicyclic compounds

1-(2-Furyl)-3-amino-4,4-dimethylpentane was used to obtain 3-tert-butyl-1,2-dihydropyrrolizine, the catalytic hydrogenation of which over Rh/Al₂O₃ at room temperature gives a mixture of cis- and trans-3,8-H-3-ter-butylpyrrolizidines with predominance of the cis isomer, whereas hydrogenation at 90–100 °C gives a mixture containing the trans isomer as the principal component. The three-dimensional structures of the isomers follow from data on the catalytic hydrogenation and isomerization and the IR, Raman, and PME spectra. A considerable percentage of the trans-fused form is characteristic for cis-3,8-H-3-tert-butylpyrrolizidine.     

改进的微波辅助无溶剂法提取薄荷和陈皮中的挥发油组分

An improved solvent free microwave extraction, in which a kind of microwave absorption medium （carbonyl iron powder） was used, was applied to the extraction of essential oil from dried menthol mint and orange peel without addition of any solvent and pretreatment. It took much less time of extraction （30 min） than microwave-assisted hydrodistillation （90 min） and conventional hydrodistillation （180 min）. The kinds of chemical compositions in essential oil extracted by different methods were almost the same and such improved solvent free microwave extraction can be a feasible way in extraction of essential oil from dried plant materials.