1,2,4,6—四苯基—2—羟基—8—氮杂双环[3、2、1]辛烷的核磁共振研究

用多种核磁共振实验方法并结合其它结构信息,确定1,2,4,6-四苯基-2-羟基8-氮杂双环[3、2、1]辛烷的化学结构,并指定该化合物的核磁共振归属。     

兰州重离子加速器控制系统DSP组件设计

针对重离子加速器部分电源的控制要求,进行了分析研究,提出并实现了一种实时、高效、多功能的控制系统。该系统基于数字信号处理器（DSP）和两片现场可编程门阵列（FPGA）芯片相结合的核心处理构架,在系统后端利用PXI总线接口配合FPGA来与工控机箱中的系统控制器和其他控制组件进行大批量数据交互;系统前端利用直接数字频率合成器、模数转换器和数模转换器等器件结合DSP和FPGA中的控制算法及相应控制机制来实现对不同电源控制参数的处理和功率的输出;平台中两组光纤模块也与FPGA相配合实现对同步触发事例等实时数据的收发和调试。     

InAs/GaAs submonolayer quantum-dot superluminescent diodes with active multimode interferometer configuration

With a chirped InAs/GaAs SML-QD (quantum dot) structure serving as the active region, the superluminescent diodes emitting at wavelength of around 970nm are fabricated. By using an active multimode interferometer configuration, these devices exhibit high continue-wave output powers from the narrow ridge waveguides. At continue-wave injection current of 800mA, an output power of 18.5mW, and the single Gaussian-like emission spectrum centered at 972nm with a full width at half maximum of 18nm are obtained.     

PVK空穴传输层对Ndq3近红外发光二极管性能的影响

以PEDOT∶PSS作为空穴注入层,聚合物PVK作为空穴传输层,制备了结构为ITO/PEDOT∶PSS/PVK/8-羟基喹啉钕(Ndq3)/Al的近红外OLED,研究了PVK与PEDOT∶PSS功能层对器件I-V特性和EL光谱的影响。结果显示,在EL光谱中的905,1 064,1 340 nm处均观察到了荧光发射,分别对应于Nd3+的4F3/2→4I9/2、4F3/2→4I11/2和4F3/2→4I13/2能级跃迁。与参考器件对比分析认为,PEDOT∶PSS高的导电性降低了器件的串联电阻,增大了器件的工作电流;PVK与PEDOT∶PSS共同降低了空穴的注入势垒,实现了Ndq3发光层区域的载流子的注入平衡并改善了器件的发射强度。此外,PVK有效降低了ITO电极表面粗糙度,也是器件性能提高的原因之一。     

The Quantum Search Algorithms for All Solutions

Two quantum search algorithms are proposed for known and unknown number of solutions. The first algorithm begins with an arbitrary rotation phase Grover search algorithm by recursive equations, then a sub-algorithm (G _α algorithm) and the corresponding quantum circuits are designed, the probability of success and expected number of iterations of the sub-algorithm to find a solution are analyzed. Based on these results, we design the whole algorithm and estimate the expected number of iterations to search all solutions. The design of the second algorithm follows the same steps. We firstly study a quantum counting algorithm, then design a sub-algorithm (QCG algorithm), and analyze the probability of success and the expected number of iterations to find a solution. Finally the whole algorithm for all solutions is designed and analyzed. The analysis results show that these two algorithms find all solutions in the expected times of $O(t\sqrt{N})$ (t is a number of solutions and N is a total of states).     

Pigment identification and decoration analysis of a 5th century Chinese lacquer painting screen: a micro‐Raman and FTIR study

To investigate the pigments and decoration applied to a wood‐based lacquer painting screen from the tomb of Si‐ma Jin‐long, Shanxi Province, central China, made by Chinese craftsmen in the 5th century, a combination of micro‐Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), wavelength dispersive X‐ray fluorescence (WDXRF), and microscopic examination was used. The obtained results are as follows: (1) the black, yellow, and red colors are identified as carbon black, orpiment and realgar, and cinnabar, respectively, by using micro‐Raman spectroscopy. The FTIR result shows that the white pigment filled in the leaves is not lead white, as assumed in the literature, but gypsum. Whether lead white was used at other locations remains unanswered and requires more samples for further work; (2) the thickness of each discernable pigment layer, as observed under the microscope, is approximately equal and the differences among them are small, suggesting a superfine painting skill; besides, a noticeable smooth interface between wood and the red grounding substance indicates that a polishing process might have been applied before the painting; (3) the red background was proved to contain cinnabar, but further FTIR analyses found no evidence for the presence of Chinese wood oil; and (4) the most interesting finding, rarely reported before, is that white grains of different sizes are found in both pigment layers and the grounding substance, which are perhaps an intentional addition. Further, in situ XRF and Raman analyses indicate that they are sourced from hydroxyapatite, coming probably from the intentional addition of animal bone ash to the lacquer. But how such a process could be finished and what purpose it served have not yet been answered. Copyright © 2009 John Wiley & Sons, Ltd.     

SQUID用于铍材残余应力检测的计算机模拟

依据SMM-601型超导量子干涉显微镜检测部分构建计算模型,采用电磁场有限元方法分析了残余应力引起的非磁性金属材料铍电导率变化对超导量子干涉仪(SQUID)检测信号的影响,并讨论了该方法实际应用于非磁性金属材料残余应力检测的条件和可能性。     

多孔硅拉曼光谱随激发功率变化的研究

用阳极氧化法新制备了多孔硅样品,以457．5nm固体激光器为激发光源,在不同激发功率下,获得了拉曼谱图和一些谱峰参量随激光功率的变化关系。解释了520cm^-1和300cm^-1附近拉曼峰随功率变化的一系列可逆的实验现象：随激光功率升高出现的红移和非对称性展宽,主要是由于样品局域平均粒径变小而受量子限域效应的影响导致的;样品局域平均粒径在表面上的二维减小与随激光功率升高而导致的局域温升并不违背基本的热力学定律;高功率时520cm^-1附近双峰的出现是由于多孔硅样品局域平均粒径达到一定阈值而导致的纵模和横模双声子模的分裂。     

Lateral growth of aligned mutilwalled carbon nanotubes under electric field

In this work we report laterally aligned multi-walled carbon nanotube (MWNT) by an electric field during growth. The MWNTs were selectively grown between lateral sides of the catalytic metals on predefined electrodes by chemical-vapor deposition. The electric field distribution for various geometries was simulated using Maxwell 2D simulation in order to realize better alignment of laterally grown carbon nanotubes (CNTs). The experimental results show that the electric field direction at the vicinity of catalyst and nanotubes-substrate interactions are principal factor in aligning CNTs laterally.     

Ultrasonic investigation of amorphous carbon in various frequencies at low temperatures from 2.1 to 300 K

Using pulse echo overlap measurement, the elastic behavior of amorphous carbon has been studied at ambient and low temperatures. The smaller ratio B/G of the bulk modulus to shear modulus and smaller Poisson's ratio σ at room temperature indicate that there is an intrinsic stiffening of transverse acoustic phonons in the amorphous carbon. The acoustic velocity and attenuation for longitudinal modes have been measured between 2.1 and 300 K at three frequencies of 7, 21 and 35 MHz, respectively. Their frequency and temperature dependence are observed. The elastic constant C₁₁ increases with decreasing temperature and show enhanced stiffening at low temperatures. In the 130-220 K region, the abnormal change and effect of longitudinal velocity and attenuation with temperature and frequency, and a phase transition associated with structure relaxations are discussed.