Interfacial and electrical properties of HfAlO/GaSb metal-oxide-semiconductor capacitors with sulfur passivation

Interfacial and electrical properties of HfAlO/GaSb metal-oxide-semiconductor capacitors(MOSCAPs) with sulfur passivation were investigated and the chemical mechanisms of the sulfur passivation process were carefully studied. It was shown that the sulfur passivation treatment could reduce the interface trap density Ditof the HfAlO/GaSb interface by 35% and reduce the equivalent oxide thickness(EOT) from 8 nm to 4 nm. The improved properties are due to the removal of the native oxide layer, as was proven by x-ray photoelectron spectroscopy measurements and high-resolution cross-sectional transmission electron microscopy(HRXTEM) results. It was also found that GaSb-based MOSCAPs with HfAlO gate dielectrics have interfacial properties superior to those using HfO2 or Al2O3 dielectric layers.     

The effect of surface crystalline layers on asymmetric off-diagonal magnetoimpedance in field-annealed CoFeSiB amorphous ribbons

The off-diagonal magnetoimpedance in field-annealed CoFeSiB amorphous ribbons was measured using a pick-up coil wound around the sample. One side of a ribbon was etched in hydrofluoric acid solution during various times in order to change the thickness of the surface crystalline layer appearing after annealing. The asymmetric two-peak field dependence of the off-diagonal impedance was observed for all samples. The evolution of the off-diagonal magnetoimpedance with the change in the ribbon thickness is analyzed.     

两种铽配合物与PVK混合体系的发光机理研究

研究了稀土配合物Tb(p-MBA)₃phen(样品Ⅰ)和Tb(p-ClBA)₃phen(样品Ⅱ)与导电聚合物材料PVK掺杂体系的光致发光和电致发光特性。发现在样品Ⅰ与PVK混合薄膜的光致发光中,除了三价铽离子的发光外,还能看到明显的PVK的发光;而在电致发光中,PVK的发光完全被抑制,只能看到Tb3+的绿光发射。对样品Ⅱ与PVK的混合发光层,无论其光致发光谱还是电致发光谱,都没有看到410 nm处PVK的发射。进一步测量两种材料的激发光谱,初步探讨了器件的发光机理。样品Ⅰ的发光可能来源于两个方面,一是PVK到稀土配合物的不完全的能量传递,二是由于载流子俘获机理;样品Ⅱ的发光则是由于PVK到稀土配合物的完全的能量传递。     

吖啶红与铬(Ⅵ)的高灵敏度荧光反应及应用

研究了在硫酸介质中,铬(Ⅵ)氧化吖啶红荧光增强反应的最佳实验条件,建立了测定痕量铬(Ⅵ)的新的高灵敏度荧光分析法。该方法的检出限为0.6 μg·L-1,线性范围为2.0～32 μg·L-1,对含量为4.0和28 μg·L-1的Cr(Ⅵ)标准溶液进行11次平行测定, 其相对标准偏差分别为2.0%和1.0%。该法用于电镀液、废铬酸洗液及合金钢中痕量铬(Ⅵ)的测定,与标准样品和二苯碳酰二肼分光光度法进行了对照,获得了满意结果。     

Superamphiphobic,light-trapping FeSe2 particles with a micro-nano hierarchical structure obtained by an improved solvothermal methodSuperamphiphobic,light-trapping FeSe2 particles with a micro-nano hierarchical structure obtained by an improved solvothermal methodSuperamphiphobic,light-trapping FeSe2 particles with a micro-nano hierarchical structure obtained by an improved solvothermal method

Wettability and the light-trapping effect of FeSe2 particles with a micro-nano hierarchical structure have been inves- tigated. Particles are synthesized by an improved solvothermal method, wherein hexadecyl trimetbyl ammonium bromide （CTAB） is employed as a surfactant. After modifying the particles with heptadecafluorodecyltrimethoxy-silane （HTMS）, we find that the water contact angle （WCA） of the FeSe2 particles increases by 6.1~ and the water sliding angle （WSA） decreases by 2.5~ respectively, and the diffuse reflectivity decreases 29.4% compared with similar FeSe2 particles synthe- sized by the conventional method. The growth process of the particles is analyzed and a growth scenario is given. Upon altering the PH values of the water, we observe that the superhydrophobic property is maintained quite consistently across a wide PH range of 1-14. Moreover, the modified particles were also found to be superoleophobic. To the best of our knowledge, there is no systematic research on the wettability of FeSe2 particles, so our research provides a reference for other researchers.     

球磨法对不同基质上转换发光的影响

分别利用高温固相法和高能球磨法,在反应温度为1 100 ℃、反应时间为2 h的条件下合成了以Y₂O₃、La₂O₃、LiTaO₃为基质的双掺和三掺Tm³⁺、Er³⁺、Yb³⁺发光粉。XRD测试结果表明,高能球磨法制备的Y₂O₃、La₂O₃、LiTaO₃材料的相纯度高于高温固相法。用980 nm红外激光分别对两种合成方法制得的样品粉末进行发光性质的检测,结果表明高能球磨法制得样品的发光强度高于高温固相法样品。不同基质样品的上转换发光性质表现为：Tm³⁺、Yb³⁺掺杂呈蓝光;Er³⁺、Yb³⁺掺杂呈黄光;Tm³⁺、Er³⁺、Yb³⁺三掺样品的发光减弱,颜色可调。     

Engineering Double-Walled Carbon Nanotubes by Ar Plasma

Double-walled carbon nanotubes （DWCNTs） have been found to be promising nano-materials for nano-mechanical and nano-electrical devices due to their double-walled structures. Modifying DWCNTs would be one of the key technologies for device construction. We demonstrate engineering the geometry of DWCNTs by etching with Ar plasma. The characterization by atomic force rnicroscopy indicates that single atomic carbon layers could be removed from DWCNTs by Ar plasma. The etching effect is further investigated by electrical measurements on DWCNT field-effect transistors, which allow us to study the interwall screen effect as well.     

Design and properties of binary axilens

A novel optical element, axilens, proposed by Davidson et al., for achieving extended focal length is introduced. We propose a method to design the binary axilens which has high diffraction efficiency. Using computer numerical simulation, we designed 4 axilenses each has different parameters. In this paper we present our results and make comparison with that in ref. [1]. The properties of binary axilens such as the focal depth, the lateral resolution and the intensity distribution along axis is discussed.     

类锂铝复合机制产生X光激光的等离子体状态

本文从速率方程出发,讨论了类锂铝复合等离子体的激发态结构,衰减常数,反转率和小信号增益等表征介质增益特性的物理量以及它们随电子温度,电子密度和光子逃逸几率的变化。找到了进行类锂铝离子通过复合机制产生X光激光设计应创造的等离子体状态目标区域。还讨论了这些物理量随原子序数变化的定标律。     

CVD金刚石薄膜探测器性能研究

通过实验测量和理论分析, 从载流子动力学角度研究了用于脉冲辐射探测的CVD金刚石薄膜探测器的适用结构、电荷收集效率和时间响应性能. 结果表明, CVD金刚石薄膜可以制成均匀型结构的探测器; 薄膜中的缺陷会降低探测器的电荷收集效率, 探测器的电荷收集效率随场强增大而增大直至饱和. 已研制的CVD金刚石探测器电荷收集时间可达719ps, 在2.5V/μm场强下达到饱和, 电荷收集效率 达60.5%; 晶格散射是影响探测器时间响应的主要因素, 选用大晶粒甚至单晶金刚石薄膜可以提高探测器时间响应.