聚甲醛结晶动力学研究

用解偏振光强法和差示扫描量热法（ＤＳＣ）分别研究了聚甲醛和聚甲醛助剂Ｐ的等温结晶动力学和非等温结晶动力学。探讨了助剂Ｐ对聚甲醛的结晶成核作用。     

光辅助超高真空CVD系统制备SiGe异质结双极晶体管研究

介绍了采用紫外光化学汽相淀积(UVCVD)、超高真空化学汽相淀积(UHVCVD)和超低压化学汽相淀积(ULPCVD)技术研制的化学汽相淀积(CVD)工艺系统,简称U³CVD系统.应用该系统,在450℃低温和10^-7Pa超高真空环境下研制出了硅锗(SiGe)材料和硅锗异质结双极晶体管(SiGe HBT)材料.实验表明,该系统制备的SiGe HBT材料性能良好.     

Propagation of thickness-twist waves in a multi-sectioned piezoelectric plate of 6 mm crystals

We study thickness-twist vibrations and waves in an unbounded, multi-sectioned piezoelectric plate of crystals with 6 mm symmetry or polarized ceramics. An exact solution from the three-dimensional equations of piezoelectricity is obtained. Basic vibration and wave propagation characteristics are calculated based on the solution. The results are useful in the understanding and design of plate resonators, filters and acoustic wave sensors of ZnO, AlN and polarized ceramics.     

La掺杂浓度对PLZT薄膜红外光学性质的影响

采用溶胶-凝胶法在Pt/Ti/SiO2/Si衬底上制备了不同La掺杂浓度PLZT(x/40/60)薄膜- x射线衍射分析表明制备的PLZT(x/40/60)薄膜是具有单一钙钛矿结构的多晶薄膜- 通过红外椭圆偏振光谱仪测量了波长为2-5—12-6μm范围内PLZT薄膜的椭偏光谱，采用经典色 散模型拟合获得PLZT薄膜的红外光学常数，同时也拟合获得PLZT薄膜的厚度- 随着La掺杂浓 度的增大，折射率逐渐减小- 而消光系数除PLZT(4/40/60)薄膜外，呈现逐渐增大的趋势- 分析表明这些差异主要与PLZ 关键词： PLZT薄膜 红外光学性质 红外椭圆偏振光谱     

基于离差最大化原理的灰色综合评判方法及其应用

在灰色综合隶属度评价方法基础上,按照离差最大化原理,提出了一种品种区域试验的新的确定权重的方法.应用这种方法,对2002-2003年度国家黄淮南片小麦冬水组区域试验进行了分析.结果表明,这种分析方法克服了通常专家调查法和层次分析法主观随意性强的缺点,因而其分析结果更加客观、可靠.大面积生产实践也表明该方法具有一定可行性和有效性.     

Some inequalities for characteristic functions. II

Recently we established Matysiak and Szablowski's conjecture [V. Matysiak, P.J. Szablowski, Theory Probab. Appl. 45 (2001) 711-713] about a lower bound of real-valued characteristic functions. In this paper, applying an alternative approach we are able to give explicitly the ranges of argument for which the obtained inequalities hold true for general characteristic functions.     

The effect of surface crystalline layers on asymmetric off-diagonal magnetoimpedance in field-annealed CoFeSiB amorphous ribbons

The off-diagonal magnetoimpedance in field-annealed CoFeSiB amorphous ribbons was measured using a pick-up coil wound around the sample. One side of a ribbon was etched in hydrofluoric acid solution during various times in order to change the thickness of the surface crystalline layer appearing after annealing. The asymmetric two-peak field dependence of the off-diagonal impedance was observed for all samples. The evolution of the off-diagonal magnetoimpedance with the change in the ribbon thickness is analyzed.     

Synthesis and magnetic properties of multilayer Ni/Cu and NiFe/Cu nanowires

Highly ordered composite nanowires with multilayer Ni/Cu and NiFe/Cu have been fabricated by pulsed electrodeposition into nanoporous alumina membrane. The diameter of wires can be easily varied by pore size of alumina, ranging from 30 to 100 nm. The applied potential and the duration of each potential square pulse determine the thickness of the metal layers. The nanowires have been characterized by transmission electron microscopy (TEM), magnetic force microscopy (MFM), and vibrating sample magnetometer (VSM) measurements. The MFM images indicate that every ferromagnetic layer separated by Cu layer was present as single isolated domain-like magnet. This technique has potential use in the measurement and application of magnetic nanodevices.     

Concentration factors for functions with harmonic bounded mean variation

We discuss determination of jumps for functions with generalized bounded variation. The questions are motivated by A. Gelb and E. Tadmor [1], F. Móricz [5] and [6] and Q. L. Shi and X. L. Shi [7]. Corollary 1 improves the results proved in B. I. Golubov [2] and G. Kvernadze [3]. Supported by NSFC 10671062.