Thermoresponsive Poly(2‐oxazine)s

The monomers 2‐methyl‐2‐oxazine (MeOZI), 2‐ethyl‐2‐oxazine (EtOZI), and 2‐n‐propyl‐2‐oxazine (nPropOZI) were synthesized and polymerized via the living cationic ring‐opening polymerization (CROP) under microwave‐assisted conditions. pEtOZI and pnPropOZI were found to be thermoresponsive, exhibiting LCST behavior in water and their cloud point temperatures (T_CP) are lower than for poly(2‐oxazoline)s with similar side chains. However, comparison of poly(2‐oxazine) and poly(2‐oxazoline)s isomers reveals that poly(2‐oxazine)s are more water soluble, indicating that the side chain has a stronger impact on polymer solubility than the main chain. In conclusion, variations of both the side chains and the main chains of the poly(cyclic imino ether)s resulted in a series of distinct homopolymers with tunable T_CP.     

Materials,Furnaces, and Texts: How to Write About Making Glass Colours in the Seventeenth Century

Johann Kunckel's Ars Vitraria Experimentalis (1679) is arguably the most important text on seventeenth-century glassmaking. As an augmented German translation of Italian (1612) and English (1662) editions, Kunckel presented a complex and layered text that contained a plethora of recipes, elaborate commentaries and annotations, and various appendices dealing with glass-related technologies and arts. We reworked four recipes for rosichiero glass (a transparent red glass) in Kunckel's book to discover what strategies Kunckel employed to help readers engage with the recipes and to make the recipes work in the specificity of their own workshop. We learned that Kunckel regularly neglected to test the Italian recipes, and that not all of his corrections are improvements, thereby specifying our understanding of the “codification of error” as a strategy to write down colour-making knowledge. Instead, Kunckel made the choice to educate his readers on the very mechanisms of glass colouring to allow them to intervene to influence the colour of the glass and to gain further control over the making process. He argued that the colour of glass is sensitive to the manner in which ingredients are sourced and processed, and emphasised the importance of furnace management in optimising the colour of glass.     

Rapid determination of complex mixtures by dual-column gas chromatography with a novel stationary phase combination and spectrometric detection

Fast GC separations of a broad range of analytes are demonstrated using a capillary column coated with a novel immobilized ionic liquid (IIL) stationary phase. Both completely cross-linked and partially cross-linked columns were evaluated, yielding approximately 1600 and approximately 2000 theoretical plates per meter, respectively. Enhanced separation is demonstrated using a dual-column ensemble comprised of an IIL column, a commercially coated Rtx-1 column, and a pneumatic valve connecting the inlet to the junction point between the two columns. Enhanced separation of 20 components, with two sets of co-eluting peaks is shown in approximately 150 s, while sacrificing only a length of time equivalent to the sum of the stop flow pulses, or about 15.5 s. A novel application of a band trajectory model that shows band position as a function of analysis time as analytes move through the column ensemble is employed to determine pulse application times. The model predicts component retention times within a few seconds. Another method of selectivity enhancement of the IIL stationary phase-coated columns is demonstrated using a differential mobility spectrometer (DMS) that provides a second dimension separation based on ion mobility in a high-frequency electrical field. The DMS is able to separate all but one set of co-eluting components from the IIL column. The separation of 13 components found in the headspace above U.S. currency is demonstrated using the IIL column in a dual-column ensemble as well as with the DMS.     

The way to measure quantitatively full dissolution and crystallization of polyamides in water up to 200 °C and above by DSC

The way to measure quantitatively full dissolution and crystallization of polyamides in water up to 200 °C and above by DSC is described. Stainless-steel high-pressure pans enable research on fully dissolving polyamides in water under vapor pressure. The results show clearly that polyamide 6 (PA6) is soluble in water under vapor pressure in the whole concentration range and that water acts as a crystallization and melting point suppressor. The maximum temperature depression is approximately 60 °C. This depression of the transitions is independent of concentration over a large range (10-70 mass% PA6 in water). When PA6 dissolves in water during heating, the polymer often sets to the sides of the DSC sample pan. Because of this the contact between the sample and the bottom of the pan reduces during measurement and therefore DSC heating curves are frequently curved. Adding steel wool to these stainless-steel high-pressure pans improves the measurements by increasing the thermal conductivity between the sample and pan bottom, and as a result the DSC curves become less curved. The interpretation of the measurements improves and the possibility of reproducible peak area calculations also in heating comes in sight.     

Solubility behavior of amphiphilic block and random copolymers based on 2‐ethyl‐2‐oxazoline and 2‐nonyl‐2‐oxazoline in binary water–ethanol mixtures

The solution properties of random and block copolymers based on 2‐ethyl‐2‐oxazoline (EtOx) and 2‐nonyl‐2‐oxazoline (NonOx) were investigated in binary solvent mixtures ranging from pure water to pure ethanol. The solubility phase diagrams for the random and block copolymers revealed solubility (after heating), insolubility, dispersions, micellization as well as lower critical solution temperature (LCST) and upper critical solution temperature behavior. The random and block copolymers containing over 60 mol % pNonOx were found to be solubilized in ethanol upon heating, whereas the dissolution temperature of the block copolymers was found to be much higher than for the random copolymers due to the higher extent of crystallinity. Furthermore, the block copolymer containing 10 mol % pNonOx exhibited a LCST in aqueous solution at 68.7 °C, whereas the LCST for the random copolymer was found to be only 20.8 °C based on the formation of hydrophobic microdomains in the block copolymer. The random copolymer displayed a small increase in LCST up to a solvent mixture of 9 wt % EtOH, whereas further increase of ethanol led to a decrease in LCST, which is probably due to the “water‐breaking” effect causing an increased attraction between ethanol and the hydrophobic part of the copolymer. In addition, the EtOx‐NonOx block copolymers revealed the formation of micelles and dynamic light scattering demonstrated that the micellar size is increasing with increasing the ethanol content due to the enhanced solubility of EtOx. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 515–522, 2009     

Use of engineered unique cysteine residues to facilitate oriented coupling of proteins directly to a gold substrate

A prerequisite for any "lab on a chip" device that utilizes an electrical signal from the sensor protein is the ability to attach the protein in a specific orientation onto a conducting substrate. Here, we demonstrate the covalent attachment to a gold surface of light-harvesting membrane proteins, from Rhodobacter sphaeroides, via cysteine (Cys) residues engineered on either the cytoplasmic or periplasmic face. This simple directed attachment is superior in its ability to retain light-harvesting complex (LHC) function, when compared to a similar attachment procedure utilizing a self-assembled monolayer on gold. LH 1 has previously been observed to have superior photostability over LH 2 (Magis et al. [2010] Biochim. Biophys. Acta, 1798, 637-645); this characteristic is maintained even with the introduction of Cys residues.     

Total-head measurements in fluctuating flows

Zusammenfassung Es ist eine Methode für die Messung eines schwankenden Staudruckes entwickelt worden. Das Ger?t besteht aus Staurohr, Verbindungsrohr, piezo-elektrischem Druckaufnehmer und elektrischem Filter. Die aerodynamischen, mechanischen und elektrischen Eigenschaften des Systems werden besprochen und eine Eichmethode beschrieben. Das ausgeführte Ger?t besitzt eine nahezu geradlinige Eichkurve bis 800 Hz und eignet sich für die Turbulenzmessungen hinter verschiedenen Gittern. Die Ergebnisse stimmen befriedigend mit Hitzdrahtmessungen überein.

---

---

Laboratorium voor Aero- en Hydrodynamica van de Technische Hogeschool te Delft (Mededeling no. 87).