Spectroscopic and electrochemical study of the adsorption of [Co(en)2Cl2]Cl on gamma-alumina: influence of the alumina ligand on Co(III)/(II) redox potential

UV-visible and Raman spectroscopies as well as electrochemical techniques have been used to characterize cis- and trans-[Co(III)(en)2Cl2]Cl (en=ethylenediamine) complexes and the gamma-alumina-supported cis-Co((III)) complex. It is shown that the electrochemical reduction of these complexes occurs according to a multistage mechanism involving two electrochemical steps, with the formation of a dimer that was characterized by UV-visible spectroscopy (intervalence band at 670 nm). The apparent standard redox potential for each step has been determined, and experimental results reveal that cis and trans complexes present similar electrochemical characteristics. It is also shown that the deposition of trans-[Co(III)(en)2Cl2]+ on gamma-alumina leads to an inner-sphere complex (ISC) in a cis configuration in which Cl- ligands are substituted by OH or O- surface groups of alumina. These changes in the coordination sphere of the complex induce a substantial decrease of its apparent redox potential since it is -0.63 V/SCE (saturated calomel electrode) for the gamma-alumina-supported cis-Co(III) complex, whereas values of -0.17 and -0.35 V/SCE were determined in dimethyl sulfoxide (DMSO) for the trans and cis precursor complexes, respectively.     

Fluorescence studies of lens epithelial cells and their constituents

Steady-state and time-resolved fluorescence measurements have been made of human and rabbit lens epithelial cells and their total soluble protein. Excitation at 350 nm results in broad fluorescence spectra peaking at 450 nm and stretching into the visible past 650 nm. The fluorescence excitation spectra peak around 350 nm. We assign the species responsible for this absorption and fluorescence as NADPH. Because the absorption of near-UV light (300-400 nm) is responsible for cell damage and death, we postulate that excited states of NADPH are implicated in the mechanisms of cell damage. Preirradiation with 355 nm light leads to a loss of NADPH fluorescence but with no change in decay kinetics. Possible mechanisms for cell damage are explored.     

Controlling and supporting sets in operator algebras

Two properties of subspaces of Banach algebras are introduced. These are closely related to Mathieu's concept of ultraprime Banach algebras. Special attention is paid to nested and algebras.

     

New insights into the origin of visible light photocatalytic activity of nitrogen-doped and oxygen-deficient anatase TiO2

The spin-polarized plane-wave pseudopotential method, based on density-functional theory, has been used to calculate the electronic band structures and the optical absorption spectra of nitrogen-doped and oxygen-deficient anatase TiO2. The calculated results are in good agreement with our experimental measurements. These ab initio calculations reveal that the optical absorption of nitrogen-doped TiO2 in the visible light region is primarily located between 400 and 500 nm, while that of oxygen-deficient TiO2 is mainly above 500 nm. These results have important implications for the understanding and further development of photocatalytic materials that are active under visible light.     

Analysis of cesium extracting solvent using GCMS and HPLC

A high-level waste (HLW) remediation process scheduled to begin in 2007 at the Savannah River Site is the Modular Caustic Side Solvent Extraction (CSSX) Unit (MCU). The MCU will use a hydrocarbon solvent (diluent) containing a cesium extractant, a calix[4]arene compound, to extract radioactive cesium from caustic HLW. The resulting decontaminated HLW waste or raffinate will be processed into grout at the Saltstone Production Facility (SPF). The cesium containing CSSX stream will undergo washing with dilute nitric acid followed by stripping of the cesium nitrate into a very dilute nitric acid or the strip effluent stream and the CSSX solvent will be recycled. The Defense Waste Processing Facility (DWPF) will receive the strip effluent stream and immobilize the cesium into borosilicate glass. Excess CSSX solvent carryover from the MCU creates a potential flammability problem during DWPF processing. Bench-scale DWPF process testing was performed with simulated waste to determine the fate of the CSSX solvent components. A simple high performance liquid chromatography (HPLC) method was developed to identify the modifier (which is used to increase Cs extraction and extractant solubility) and extractant within the DWPF process. The diluent and triocytlamine (which is used to suppress impurity effect and ion-pair disassociation) were determined using gas chromatography mass spectroscopy (GCMS). To close the organic balance, two types of sample preparation methods were needed. One involved extracting aqueous samples with methylene chloride or hexane, and the second was capturing the off gas of the DWPF process using carbon tubes and rinsing the tubes with carbon disulfide for analysis. This paper addresses the development of the analytical methods and the bench-scale simulated waste study results.     

Versatile access to benzhydryl-phenylureas through an unexpected rearrangement during microwave-enhanced synthesis of hydantoins

[reaction: see text] A new access to benzhydryl-phenylureas is described. These new interesting urea derivatives were obtained by reaction of substituted benzils with substituted phenylureas under microwave irradiation. Phenylthiourea, when reacted with benzil, gave 3-phenyl-thiohydantoin. Moreover, benzylurea, as phenethylurea, gave the corresponding 3-substituted hydantoin derivatives, demonstrating that only phenylurea derivatives can result in benzhydryl-phenylureas under the applied conditions. This new reaction proved to be an easy access to substituted 1-benzhydryl-3-phenyl-ureas.     

Development of a solid phase extraction for 13 'new' generation antidepressants and their active metabolites for gas chromatographic-mass spectrometric analysis

A solid phase extraction procedure (SPE) for 13 'new' antidepressants (venlafaxine, fluoxetine, viloxazine, fluvoxamine, mianserin, mirtazapine, melitracen, reboxetine, citalopram, maprotiline, sertraline, paroxetine and trazodone) together with eight of their metabolites (O-desmethylvenlafaxine, norfluoxetine, desmethylmianserine, desmethylmirtazapine, desmethylcitalopram, didesmethylcitalopram, desmethylsertraline and m-chlorophenylpiperazine) from plasma is optimized using HPLC-DAD as monitoring system. Special attention has been paid to the choice of washing and eluting solvent, resulting in a highly concentrated, clean and moisture free extract, also suitable for GC-MS. A total number of 10 sorbents (apolar, polymeric, ion-exchange and mixed mode) was evaluated. Based on recovery, reproducibility and absence of interfering substances the strong cation exchanger gave the best results. Recoveries were determined at low and high therapeutic and toxic levels and ranged between 70 and 109% for all compounds, except for trazodone (39%).     

Analysis of benzo[a]pyrene diol epoxide-DNA adducts by capillary zone electrophoresis- electrospray ionization-mass spectrometry in conjunction with sample stacking

Benzo[a]pyrene diol epoxide (BPDE) was reacted in vitro with (2'-deoxy)nucleotides and with calf thymus DNA. The modified DNA was enzymatically hydrolyzed to the 5'-monophosphate nucleotides using deoxyribonuclease I (DNA-ase I), nuclease P1 and snake venom phosphodiesterase (SVP). Most of the unmodified nucleotides were removed using solid phase extraction (SPE) in a polystyrene divinylbenzene copolymer. Three adducts could be detected and identified using capillary zone electrophoresis(negative)-ion electrospray ionization-mass spectrometry (CZE-(-)-ESI-MS) in conjunction with sample stacking. This way, not only a BPDE-dGMP adduct [(M-H)(-) at m/z 648], a well-known nucleotide adduct, could be retrieved, but also a BPDE-dAMP [(M-H)(-) at m/z 632] and a BPDE-dCMP adduct [(M-H)(-) at m/z 608] could be detected for the first time. The presence of the prominent ion at m/z 195 (the deoxyribose-phosphate ion) in the three low-energy collision-activated decomposition (CAD) spectra indicated that the adducts were formed through base-alkylation. CZE-positive ion ESI-MS/MS experiments were performed to obtain further information on base-alkylation. The absence of the loss of NH(3) from the nucleobase in each CAD spectrum points to an alkylated exocyclic NH(2) position of the nucleobase. So, the three adducts could be identified as BPDE-N(2)-dGMP, BPDE-N(6)-dAMP and BPDE-N(4)-dCMP using CZE-ESI-MS and CZE-ESI-MS/MS.