Contact angle hysteresis, adhesion, and marine biofouling

Adhesive and marine biofouling release properties of coatings containing surface-oriented perfluoroalkyl groups were investigated. These coatings were prepared by cross-linking a copolymer of 1H,1H,2H,2H-heptadecafluorodecyl acrylate and acrylic acid with a copolymer of poly(2-isopropenyl-2-oxazoline) and methyl methacrylate at different molar ratios. The relationships between contact angle, contact angle hysteresis, adhesion, and marine biofouling were studied. Adhesion was determined by peel tests using pressure-sensitive adhesives. The chemical nature of the surfaces was studied by using X-ray photoelectron spectroscopy. Resistance to marine biofouling of an optimized coating was studied by immersion in seawater and compared to previous, less optimized coatings. The adhesive release properties of the coatings did not correlate well with the surface energies of the coatings estimated from the static and advancing contact angles nor with the amount of fluorine present on the surface. The adhesive properties of the surfaces, however, show a correlation with water receding contact angles and contact angle hysteresis (or wetting hysteresis) resulting from surface penetration and surface reconstruction. Coatings having the best release properties had both the highest cross-link density and the lowest contact angle hysteresis. An optimized coating exhibited unprecedented resistance to marine biofouling. Water contact angle hysteresis appears to correlate with marine biofouling resistance.     

Extremal k *-Cycle Resonant Hexagonal Chains

Denote by ^* _n the set of all k ^*-cycle resonant hexagonal chains with n hexagons. For any B _n ^* _n , let m(B _n ) and i(B _n ) be the numbers of matchings (=the Hosoya index) and the number of independent sets (=the Merrifield–Simmons index) of B _n , respectively. In this paper, we give a characterization of the k ^*-cycle resonant hexagonal chains, and show that for any B _n ^* _n , m(H _n )m(B _n ) and i(H _n )i(B _n ), where H _n is the helicene chain. Moreover, equalities hold only if B _n =H _n .     

DNA cleavage reaction of antitumour antibiotic, kapurimycin A3, with deoxytetranucleotide d(CGCG)2

Kapurimycin A3 (kap A3, 1 ), an antitumour antibiotic, alkylates N7 of guanine₂ (G₂) and G₄ of d(C₁G₂C₃G₄)₂ to produce their covalent adducts 2 (64 %) and 3 (7.0 %), respectively. Heating at 90 °C for 5 min degraded both adducts to kap A3 - G adduct (5) with the concurrent release of their respective abasic-site containing oligomers 4 and 6.     

Generation of peptide radical dications via low-energy collision-induced dissociation of [Cu<Superscript>II</Superscript>(terpy)(M + H)]<Superscript>·3+</Superscript>

The first example of the formation of hydrogen-deficient radical cations of the type [M + H](.2+) is demonstrated to occur through a one-electron-transfer mechanism upon low-energy collision-induced dissociation (CID) of gas-phase triply charged [Cu(II)(terpy)(M + H)](.3+) complex ions (where M is an angiotensin III or enkephalin derivative; terpy = 2,2':6',2'-terpyridine). The collision-induced dissociation of doubly charged [M + H](.2+) radical cations generates similar product ions to those prepared through hot electron capture dissociation (HECD). Isomeric isoleucine and leucine residues were distinguished by observing the mass differences between [z(n) + H](.+) and w(n)(+) ions (having the same residue number, n) of the Xle residues. The product ion spectrum of [z(n) + H](.+) reveals that the w(n)(+) ions are formed possibly from consecutive fragmentations of [z(n) + H](.+) ions. Although only the first few [M + H](.2+) species have been observed using this approach, these hydrogen-deficient radical cations produce fragment ions that have more structure-informative patterns and are very different from those formed during the low-energy tandem mass spectrometry of protonated peptides.     

Substituent control of hydrogen bonding in palladium(II)-pyrazole complexes

Inter- and intramolecular hydrogen bonding of an N-H group in pyrazole complexes was studied using ligands with two different groups at pyrazole C-3 and C-5. At C-5, groups such as methyl, i-propyl, phenyl, or tert-butyl were present. At C-3, side chains L-CH(2)- and L-CH(2)CH(2)- (L = thioether or phosphine) ensured formation of chelates to a cis-dichloropalladium(II) fragment through side-chain atom L and the pyrazole nitrogen closest to the side chain. The significance of the ligands is that by placing a ligating side chain on a ring carbon (C-3), rather than on a ring nitrogen, the ring nitrogen not bound to the metal and its attached proton are available for hydrogen bonding. As desired, seven chelate complexes examined by X-ray diffraction all showed intramolecular hydrogen bonding between the pyrazole N-H and a chloride ligand in the cis position. In addition, however, intermolecular hydrogen bonding could be controlled by the substituent at C-5: complexes with either a methyl at C-5 or no substituent there showed significant intermolecular hydrogen bonding interactions, which were completely avoided by placing a tert-butyl group at C-5. The acidity of two complexes in acetonitrile solutions was estimated to be closer to that of pyridinium ion than those of imidazolium or triethylammonium ions.     

重氮树脂-聚(4-羧酸苯基)乙炔自组装膜与光电转换

近年来 ,自组装及其形成的多层复合膜已经在导电、生物传感器及非线性光学等领域得到深入研究 ,特别是以聚阴离子与聚阳离子相互作用的静电自组装研究更为深入 .这一技术制备方法简单 ,无需特别的设备 ,对膜层厚度能随意调控 ,并以水作为介质 ,对环境无害 [1～ 3] .共轭高分子 (如聚苯胺、聚吡咯及聚苯亚乙烯等 )通过自组装形成共轭高分子膜 ,对制备具有导电、光电和传输等功能的薄膜半导体器件具有重要意义 .聚乙炔类是最早被发现且理论与应用研究最多的一类共轭高分子材料[4 ,5] .本文以聚 ( 4 -羧酸苯基 )乙炔 ( PCPA)为聚阴离子 ,以重…     

Analysis of cement and cement raw meal by atomic absorption spectrophotometry using a new fusion agent

A new fusion agent is proposed for the analysis of cement and cement raw meal using AAS. In the described method, 0.8 g of the fusion agent, consisting of equal portions of oxalic acid, lithium carbonate and lithium tetraborate, was mixed with 0.2 g of the sample, and the mixture was fused for 10 min at 925 degrees C in a platinum crucilbe. The fusion cake was dissolved with dilute hydrochloric acid (1 + 10) and diluted to 500 ml for the determination of Si, Al, Fe, Ti, Na and K expressed as SiO(2), Al(2)O(3), Fe(2)O(3), TiO(2), Na(2)O, and K(2)O respectively. For the determination of Ca and Mg (expressed as CaO and MgO respectively), 10 ml of the previous sample solution were mixed with 4 ml of 6% (m/v) lanthanum nitrate solution and the solution was diluted to 100 ml. The method was found to have good accuracy and precision. The time required to determine the eight elements was around 80 min for each sample.