Photocatalytic reduction of CO2 over Cu-TiO2 /molecular sieve 5A composite

TiO(2) and different Cu wt% loaded TiO(2) (TC(0.5-5.0)), 10 wt% TC(2.0) supported on molecular sieve 5A (10 wt% TC(2.0)/MS) were prepared by impregnation and solid-state dispersion methods. The photocatalysts prepared were characterized using XRD, SEM, and UV-Vis DRS, TEM, XPS spectroscopy techniques. Photocatalytic reduction of CO(2) in water and alkaline solution are investigated in a batch reactor. The yield of oxalic acid increased notably when TC was supported on molecular sieve. The Cu-TiO(2) supported on molecular sieve catalyst promotes the charge separation that leads to an increase in the selective formation of oxalic acid in addition to methanol, acetic acid and traces of methane. The product formation is due to the high adsorption of CO(2), water and product shape selectivity of the composite photocatalyst. The maximum yield of oxalic acid was found to be 65.6 μg h(-1) g(-1) per cat using 0.2 N NaOH containing solution over 10 wt% TC(2.0)/MS photocatalyst. The difference in the photocatalytic activity is related to its physicochemical properties.     

A Rapid Stability-Indicating LC Method for Ziprasidone Hydrochloride

A simple and rapid reversed-phase liquid chromatographic method was developed for the related substances determination and quantitative evaluation of ziprasidone hydrochloride, which is used as an antipsychotic agent. Forced degradation studies were performed on bulk sample of ziprasidone hydrochloride using acid, base, oxidative hydrolysis, thermal stress and photolytic degradation. Mild degradation of the drug substance was observed during thermal stress and considerable degradation observed during base hydrolysis. The chromatographic method was fine tuned using the samples generated from forced degradation studies. Good resolution between the peaks corresponds to synthetic impurities and degradation products from the analyte were achieved on YMC Pack Pro C18 column using the mobile phase consists of a mixture of 0.05% v/v of phosphoric acid in water and acetonitrile. The stressed test solutions were assayed against the qualified working standard of ziprasidone hydrochloride and the mass balance in each case was close to 99.7% indicating that the developed method was stability-indicating. Validation of the developed method was carried out as per ICH requirements.     

New substrates in the ferroin-catalyzed bromate system in aqueous-organic mixed media

A large number of substrates have hitherto been employed in the Belousov-Zhabotinsky (B-Z) oscillatory system in pure aqueous medium. A systematic study of aromatic bromate oscillators is limited by solubility problem relating to the compounds and the brominated derivatives. The use of aqueous-organic mixed media for the oscillatory study is found to be highly useful for the study of water insoluble substances. A comparative study of the oscillatory behavior of gallic acid as substrate in pure aqueous as well as in a number of mixed media have been made in order to ascertain the suitability of mixed media in oscillatory systems. The alteration of oscillatory characteristics in the presence of organic solvent can be understood in terms of the Field-Koros-Noyes (FKN) mechanism. The oscillatory behavior of seventeen new substrates in the ferroin-catalyzed bromate system in 20% (v) acetonitrile is also presented and discussed in this communication. The reactivity of structurally related substrates has been correlated to the structure in terms of the relevant oscillatory parameters. The use of aqueous-organic mixed media in oscillatory systems would enable the investigation of new classes of substrates since getting them into the solution phase would no longer be a limitation. © 1993 John Wiley & Sons, Inc.     

Determining the resolution of Laplace inversion spectrum

In experiments involving decaying signals, it is often desirable to analyze the data as a sum of exponential decays using the Laplace inversion method. However, Laplace inversion is an ill-conditioned problem, and it is difficult to ascertain the stability of the reconstruction method and resolution of the resulting spectrum. This paper provides an easily computed approximate bound of the resolution and offers guidelines on how to design experiments to improve the spectral resolution.     

Weak Clarke epiderivative in set-valued optimization

A new notion of weak Clarke epiderivative for a set-valued map is introduced using the concept of Clarke tangent cone. The existence, characterization and properties of weak Clarke epiderivative are then studied. Finally optimality criteria are established for a constrained set-valued optimization problem in terms of weak Clarke epiderivative.     

Elastic behavior of some manganite-based orthorhombic RMnO3 (R=Sm,Eu, Gd,Dy) multiferroics

A series of multiferroic materials with the compositional formula, RMnO₃ (where R=Sm, Eu, Gd, Dy) were prepared by the well-known citrate sol–gel technique. After characterizing the samples structurally, a systematic investigation of elastic behavior has been undertaken and it has been found that the elastic moduli are increasing continuously with decreasing ionic radii of the dopant ion. Variation of longitudinal velocity with temperature for all the samples, over a temperature range 80–300 K has also been studied and the observed experimental behavior is explained using four theoretical models. It has been concluded that Lakkad's model explains the variation of Young's modulus with temperature in a better way than the other ones.     

Computational fragment-based design of Wee1 kinase inhibitors with tricyclic core scaffolds

Wee1 is cell cycle protein comprising a kinase domain and is a validated cancer target. We have designed molecules with variable tricyclic core scaffolds [6-6-5] system and extended them based on the chemical space available in the active site of Wee1 kinase using de novo drug design. The core scaffolds and linking fragments were extracted from pharmacophore-based virtual screening of ZINC and PubChem databases and Ludi library. These molecules bind the hinge region of kinase active site and form hydrogen bonds as confirmed from molecular docking, molecular dynamics simulations, and MM_PBSA calculations. When compared with reference inhibitors, AZD1775 and PHA-848125, the de novo designed molecules also show good docking scores and stability, retained non-covalent interactions, and high binding free energies contributed from active site residues.

     

Green synthesis and characterization of novel 1,2,4,5-tetrasubstituted imidazole derivatives with eco-friendly red brick clay as efficacious catalyst

Use of cheaper and recyclable materials contributes positively to economic growth with environmental sustainability. We report the prospect of utilizing red brick clay as catalyst, which exhibited excellent activity in rapid one-pot four-component condensation of 1,2,4,5-tetrasubstituted imidazoles with high conversion and yields (91–96%) in aqueous medium at 60 °C in short reaction times (25–40 min). The red brick clay material was fully characterized by XRD, FT-IR, SEM, TEM, EDX and BET analyses. Red brick clay consisted of oxides of Si (20.38%), Fe (19.55%), Al (14.30%) and minor amounts of Ca (3.60%) and Mg (1.68%). The slate-like-shaped structure morphology and flaky appearance of inexpensive solid clay material proved competent material for the synthesis of 15 novel 1,2,4,5-tetrasubstituted imidazole derivatives. In addition, the advantages of the eco-friendly method are non-toxicity and re-usability of the catalyst. Reaction offers 78% atom economy and 84% carbon capture.

     

Efficient synthesis of novel pyrazole-linked 1,2,4-triazolidine-3-thiones using bismuth on zirconium oxide as a recyclable catalyst in aqueous medium

Molecular Diversity - The Bi2O3 loading on ZrO2 as heterogeneous catalyst was established as an extremely efficient catalyst for the synthesis of a series of novel...     

Temperature dependence of dielectric constant of crystals with fluorite structure

The experimental data on the temperature variation of dielectric constant of six crystals with fluorite structure are analysed using an approach proposed by Havinga and Bosman for ionic crystals. The temperature variation of dielectric constant is resolved in three components related to the thermal expansion, the pressure dependence of dielectric constant and the temperature variation of polarizability (theA, B, C terms). In the present work, theB term is calculated semiempirically, such that the analysis can be extended to crystals like EuF₂ for which high pressure dielectric constant data are not available. For the first time, such calculations have been made for EuF₂ and PbF₂ at elevated temperatures. TheC term, which is related to the temperature variation ofir polarizability is seen to play a dominant role in determining the temperature variation of dielectric constant.