Morphological and structural characteristics of diazo dyes at the air-water interface: in situ Brewster angle microscopy and polarized UV/vis analysis

A morphological analysis is presented for Langmuir films of the diazo dyes Sudan 4 (S4), Sudan 3 (S3), and Sudan red (SR), using Brewster angle microscopy. Stable nonmonomolecular structures are formed at the air-water interface denoted as a plateau in the pressure-area isotherms. Monolayer domains are evident by the contrastless image even before the pressure onset, which grow in size until it reached a condensed monolayer. This behavior resembles that of Langmuir films from simple aromatic fatty acids. Films from all the azo dyes display similar features, according to the surface potential isotherms and in situ polarized UV/vis spectroscopy except for the larger area per molecule occupied by S4 and SR. This is attributed to the presence of CH(3) groups that cause steric hindrance modifying the organization of diazo dye molecules at the air-water interface. UV/vis polarized absorption spectroscopy showed preferential orientation of S4 and S3 on the water surface, while SR molecules lie isotropically. For these three diazo dyes, film absorption was negligible at very large areas per molecule, becoming nonzero only at a critical area coinciding with the onset of surface potential. The critical area is ascribed to the formation of a H-bonded network between water molecules and diazo dye headgroups.     

17‐Oxo‐5α‐androstane‐3α,4β‐diyl diacetate and 17‐oxo‐5β‐androstane‐3α,4β‐diyl diacetate

The title compounds, both C₂₃H₃₄O₅, are the 5α and 5β configurations of two diacetate epimers. The 5β‐diacetate crystallizes in an hexagonal structure, unusual for steroid molecules. The unit cell has an accessible solvent volume of 358 ų, responsible for clathrate behaviour. The 5β‐epimer also features some shorter than average bond lengths in the 3α,4β‐acetoxy groups. The conformations of the molecules of both epimers are compared with those obtained through abinitio quantum chemistry calculations. Cohesion of the crystals can be attributed to van der Waals and weak molecular C—H⋯O interactions.     

Thermodynamic properties of the ternary system MTBE+1-propanol+hexane

Experimental excess molar enthalpies and excess molar volumes of the ternary system x₁MTBE+x₂1-propanol+(1-x₁-x₂) hexane and the involved binary mixtures have been determined at 298.15 K and atmospheric pressure. Excess molar enthalpies were measured using a standard Calvet microcalorimeter, and excess molar volumes were determined from the densities of the pure liquids and mixtures, using a DMA 4500 Anton Paar densimeter. The UNIFAC group contribution model (in the versions of Larsen et al., and Gmehling et al.) has been employed to estimate excess enthalpies values. Several empirical expressions for estimating ternary properties from experimental binary results were applied.     

Synthesis and molecular structures of dialkylselenonium methylide complexes of indium tribromide

The reaction of bromomethyl-dibromo-indium(III), Br₂InCH₂Br with dialkylselenides, R¹SeR² (R¹ = CH₃, R² = CH₂C₆H₅; R¹ = C₂H₅, R² = CH₂C₆H₅; R¹ = R² = CH₂C₆H₅) afforded the corresponding dialkylselenonium methylide complexes of indium tribromide, Br₃InCH₂SeR¹R², which were fully characterized by NMR spectroscopy and single crystal X-ray diffraction studies.     

Degradation Kinetics of an Epoxy/Cycloaliphatic Amine Resin Under Isothermal and Non-isothermal Conditions

A study of an epoxy-cycloaliphatic amine system has been realized using a thermogravimetric technique (TG). Isothermal and non-isothermal (dynamic) methods were employed to determine the kinetic data of this system. Five methods were used for determining the activation energies of this system in the dynamic heating experiments. In two of them (Flynn-Wall-Ozawa, and Kissinger) it is not necessary to have a prior knowledge of the reaction mechanism of the degradation behaviour for this system. In the other ones (Coats and Redfern, Horowitz and Metzger, and Van Krevelen et al.) it is necessary to know this reaction mechanism, besides Criado et al. method was used for determining it. The results have shown that good agreement between the activation energies obtained from all methods can be achieved if it is assumed that the degradation behaviour of this system is of sigmoidal-rate type. This revised version was published online in August 2006 with corrections to the Cover Date.     

Molar excess heat capacities and volumes for mixtures of alkanoates with cyclohexane at 25°C

Molar excess volumes V ^E at 25°C have been determined by vibrating-tube densimetry, as a function of mole fraction x for different series of an alkanoate (H _2m+1 C _m COOC _n H _2n+1 )+cyclohexane. Three types of alkanoates were investigated, i.e., methanoates (m=0, with n=3 and 4), ethanoates (m=1, with n=2, 3, and 4) and propanoates (m=2, with n=1, 2, and 3). In addition, a Picker flow calorimeter was used to obtain molar excess heat capacities C _p ^E at constant pressure at the same temperature. V ^E is positive for all systems and rather symmetric, with V ^E (x=0.5) amounting to almost identical values in a series of mixtures containing an alkanoate isomer of same formula (say C₄H₈O₂, C₅H₁₀O₂, or C₆H₁₂O₂). The composition dependence of C _p ^E is rather unusual in that two more or less marked minima are observed for most of the mixtures, especially when the alkanoate is a methanoate or an ethanoate. These results are discussed in terms of possible changes in conformation of both the ester and cyclohexane.     

Chemical Strategies for Dendritic Magneto-plasmonic Nanostructures Applied to Surface-Enhanced Raman Spectroscopy

Chemical analyses in the field using surface-enhanced Raman scattering (SERS) protocols are expected to be part of several analytical procedures applied to water quality monitoring. To date, these endeavors have been supported by developments in SERS substrate nanofabrication, instrumentation portability, and the internet of things. Here, we report distinct chemical strategies for preparing magneto-plasmonic (Fe₃O₄ : Au) colloids, which are relevant in the context of trace-level detection of water contaminants due to their inherent multifunctionality. The main objective of this research is to investigate the role of poly(amidoamine) dendrimers (PAMAMs) in the preparation of SERS substrates integrating both functionalities into single nanostructures. Three chemical routes were investigated to design magneto-plasmonic nanostructures that translate into different ways for assessing SERS detection by using distinct interfaces. Hence, a series of magneto-plasmonic colloids have been characterized and then assessed for their SERS activity by using a model pesticide (thiram) dissolved in aqueous samples.     

Ferrocenyl,Alkyl, and Aryl‐Pyrido[2,3‐d]Pyrimidines as Vasorelaxant of Smooth Muscle of Rat Aorta via cAMP Conservation Through Phosphodiesterase Inhibition

New pyrido[2,3‐d]pyrimidines 11 , 12 , 13 , and 21 have been synthesized. The vasorelaxant effect on smooth muscle isolated from rat aorta, via PDEs inhibition, of these compounds along with other pyrido[2,3‐d]pyrimidines 14 , 15 , 16 , 17 , 18 , 19 , 20 reported earlier by our group, has also been determined. These pyrido[2,3‐d]pyrimidines 11 , 12 , 13 , 14 , 15 , 16 , 17 , 18 , 19 , 20 , 21 were synthesized by the reaction of ferrocenyl‐ethynyl ketones ( 1 , 2 , 3 , 4 ) or α‐alkynyl ketones ( 5 , 6 , 7 , 8 , 9 , 10 ) with 6‐amino‐1,3‐dimethyluracil using [Ni(CN)₄]^?4 as an active catalytic species, formed in situ in a Ni(CN)₂/NaOH/H₂O/CO/KCN aqueous system. Evaluation of the vasorelaxant effect of compounds 11 , 12 , 13 , 14 , 15 , 16 , 17 , 18 , 19 , 20 , 21 demonstrated that all compounds relax the tissue in a concentration‐dependent manner. The structural changes do not alter the effectiveness; however, there are differences related to potency expressed as EC₅₀. Compounds 12 (7‐ferrocenyl‐1,3‐dimethyl‐5‐(m‐tolyl)‐pyrido[2,3‐d]pyrimidine) and 13 (7‐ferrocenyl‐1,3‐dipropyl‐5‐(4‐metoxyphenyl)‐pyrido[2,3‐d]pyrimidine) were the most potent compounds, even more than rolipram, reference drug; the EC₅₀ was 0.41 ± 0.02 μM and 0.81 ± 0.11 μM for 12 and 13 , correspondingly. The EC₅₀ of compounds 15 (7‐ferrocenyl‐1,3‐dimethyl‐5‐phenyl‐pyrido[2,3‐d]pyrimidine), 14 (7‐ferrocenyl‐5‐(3,5‐dimethoxyphenyl)‐1,3‐dimethylpyrido[2,3‐d]pyrimidine), and 19 (5‐n‐butyl‐7‐ethyl‐1,3‐dimethylpyrido[2,3‐d]pyrimidine) was similar to EC₅₀ of rolipram. Compounds 11 , 12 , 13 , 14 , 15 , 16 , 17 , 18 , 19 , 20 , 21 significantly induce concentration‐dependent vasorelaxation in endothelium‐intact aortic rings. In addition, the relaxation responses to each compound in either endothelium‐intact or endothelium denuded aortic rings were comparable, suggesting that removal of the functional endothelium has no significant influence on its intrinsic vasorelaxant activity. In vitro capability of conserving cyclic‐AMP or cyclic‐GMP (adenosine and guanosine 3′, 5′‐cyclic monophosphate) via PDE inhibition for compounds 12 , 13 , 14 , 15 and 19 was evaluated. Compounds 15 and 19 show the highest percent inhibition effect (94.83% and 83.98%, respectively) for the decomposition of c‐AMP. Docking studies showed that the compound 15 was selective for the inhibition of PDE‐4.     

Disposable pipette tips extraction: Fundamentals,applications and state of the art

Disposable pipette tips extraction consists of a solid‐phase extraction in which the sorbent is poorly dispersed in a pipette tip, which allows a quick and dynamic contact between the aspirated analyte from the sample and the solid phase. It is a technique used particularly in food and forensic analysis, since it requires a small amount of sample and solvent. This article highlights the principles, advantages and disadvantages of the disposable pipette tips extraction method and reviews recent applications.     

Study of ionizing radiation on the properties of polyamide 6 with fiberglass reinforcement

The use of polymers reinforced with fiberglass is becoming more and more common in the switches for household industries. These compounds perform a good tension resistance to the impact and the humidity absorption being used at the present time and also are in the automobile industry in parts underneath the hood, especially in the radiator frames. The aim of this work is to study the effect of ionizing radiation on the properties of polyamide 6 with fiberglass reinforcement and undergone to different irradiation doses. Samples were prepared and irradiated on JOB 188 accelerator with an electron beam energy of 1.5 MeV in air with different doses and a dose rate of 27.99 kGy/h. Afterward, the properties of the non-irradiated and irradiated polyamide 6 with fiberglass reinforcement were evaluated.