Complex and superlattice stacking faults in D019 Co3W

Planar defects present in annealed D0₁₉?Co₃W crystals have been investigated by conventional transmission electron microscopy. Although a predominance of superlattice stacking faults was observed, five antiphase boundaries and four complex stacking faults were identified. All planar defects were observed in locked configurations or ended at grain boundaries. A comparison of relative defect energies has been carried out with a geometrical model based on pairwise interaction energies. The results suggest that the relative number of defects is not directly related to their expected energy, but rather has origin in locked configurations adopted during crystal growth and annealing.     

Site-specific cross-linking of nucleic acids using the abasic site

[formula: see text] An efficient site-specific cross-linking reaction between two carbohydrate residues present in two complementary DNA sequences is described. One oligodeoxynucleotide, 5'd(GGCTGA*CTGCG)3', carries an amino nucleophile tethered to the 2'-hydroxyl of an adenosine residue (A*). The target electrophile is an abasic site generated in the complementary sequence, 5'd(CGCAGDCAGCC)3' (D represents the deoxyribose). The cross-linking reaction was carried out by a reductive amination reaction in > 95% yield.     

Die Natur des Wassers in synthetischen Hydrogelen. III. Dilatometrie, spezifische Leitf?higkeit und dielektrische Relaxation von Poly (2,3-dihydroxypropylmethacrylat)

Ohne Zusammenfassung     

Determination Of Formaldehyde And Acetaldehyde Associated To Atmospheric Aerosols By HPLC

Abstract

A rapid new analytical protocol was developed for the determination of formaldehyde and acetaldehyde associated to atmospheric particulate matter, at ng/m³ levels. The aerosols were collected on glass fiber filters (8″×10″) at face velocities ranging from 15 m/min to 23 m/min. Aliquots of 15.4 cm² were sonicated, for 20 min, with 5.0 mL of 0,01% 2,4-dinitrophenylhydrazine (DNPH), 1 % phosphoric acid. The liquid phase was then filtered and the separation and quantification of the corresponding 2,4-dinitrophenylhidrazone (DNPHo) derivatives carried out by reverse phase HPLC. Acetonitrile:water (57:43, v/v) as mobile phase at 1.0 mL/min and absorbance detection at 350 nm and 365 nm for, respectively, formaldehyde-DNPHo (0.04 AUFS) and acetaldehyde-DNPHo (0.01 AUFS) were used. The precision for four different aliquots, from a 8″×10″ glass fiber filter, were under 0.04% for formaldehyde and 14.16 % for acetaldehyde. In Salvador, Bahia, Brazil, formaldehyde and acetaldehyde were determined, respectively, in the range of 6.8 ng/m³ to 27.3 ng/m³ and 9.1 ng/m³ to 54.6 ng/m³.     

Flow system to gas capture from a nebulized solution

The use of aerosol produced in a nebulization chamber is proposed as an alternative to gas sample capture in flow systems. This paper describes the coupling of a sampling interface with a flow system, for in situ gas monitoring. Aspects related with the behavior of aerosol formation and gas solubilization in liquid drops are discussed. The method is applied to the determination of residual lime in acidic soils. Aliquots of 5.0 ml of 1.0 mol l⁻¹ HCl were mixed with soil samples (1 g). The CO₂ released from these samples was captured by a nebulized aerosol and determined conductivity. The analytical curve from 1.0×10⁻² to 5.0×10⁻² mol kg⁻¹ CaCO₃ was ploted applying the matrix matching approach. This proposition, allowed an increase in the sensibility with detection limit of 6.0×10⁻³ mol kg⁻¹. The precision was good (R.S.D. <3%) for an analytical frequency of 22 determinations per hour. A fair agreement, at 95% confidence level, was found between the results from the proposed method and certified values of the investigated samples.     

Flow injection system for hydrolysable tannin determination

A flow injection system was proposed to evaluate the transient product of a colorimetric reaction between hydrolysable tannin and potassium iodate (KIO₃) solution. The system optimization was accomplished by using statistical methods based on experimental design. Flow rate of KIO₃ solution, sample volume, carrier flow rate, and reaction coil were the selected factors for evaluation. On screening step, complete factorial 2⁴ was used and two levels for each selected factor were studied. For the optimization phase, a centered face composite design 2² + star was employed to evaluate sample volume and flow rate of KIO₃ solution, which were the factors identified in the screening phase as having more influence on the absorbance signal. After optimization, the proposed system was compared with batch determination. Some characteristics, such as analytical frequency, reagent consumption and chemical residues generation presented better results by the use of the proposed system if compared with batch method. The system presented good repeatability with standard deviation lower than 3%, for n = 10, linearity (R² = 0.9974) for tannic acid standard, analytical frequency of 15 injections h^− 1 and limit of quantification of 24 mg L^− 1 of tannic acid. Good results were obtained when the proposed system was applied to hydrolysable tannin determination in Stryphnodendron barbatimão, Eucalyptus citriodora and Phyllanthus niruri, samples of plants commonly used in popular medicine.