Optimization of mobile phase for the determination of Esomeprazole and related compounds and investigation of stress degradation by LC–MS

In this study, the objective was to investigate the degradation behavior of Esomeprazole under different recommended stress conditions according to International Conference on Harmonization of Technical Requirements for Registration of Pharmaceuticals for Human Use [1] by HPLC. Our research showed that the effect of mobile phase species on separation was significant for the determination of Esomeprazole and its related compounds. Successful separation of the drug from its related impurities and degradation products formed under different stress conditions was achieved using ammonium acetate buffer/ACN by a gradient elution. Compared with phosphate buffer/ACN, ammonium acetate buffer/ACN under same pH and gradient showed a great improvement in resolution due to the change of elution order. The drug was subjected to stress conditions including acidic, alkaline, oxidative, photolytic, and thermal conditions. Extensive degradation occurred in acidic and oxidative conditions, while mild degradation was observed in alkaline and photolytic conditions. Besides, it turned out the drug was extremely stable under thermal condition. The stability‐indicating LC–UV method was validated with respect to linearity, precision, accuracy, specificity, and robustness. The LC–MS method was also adopted for the characterization of degradation products. Based on the m/z values and fragmentation patterns, the degradation pathway of the drug has been proposed.     

Surface and Catalytic Properties of K/V Catalysts Coating on Porous Al2O3 Substrate

The morphology of different ratio K/V catalysts supported on porous α‐alumina substrate was investigated by atomic force microscopy (AFM). Changes in the particle size distribution, pore size distribution were analyzed respectively using AFM software. In addition, their catalytic activities and compositions for carbon oxidation were studied by x‐ray diffraction (XRD), differential scanning calorimetry (DSC), and temperature‐programmed reactions (TPR). As a result, with the increase of K concentration, the mean particle size gradually increased and the mean pore size decreased. According to the catalytic activity studies, the catalytic activity of the KVO₃ and K₃V₅O₁₄ phases are more effective than KCl.     

A pre-enrichment procedure using diethyldithiocarbamate-modified TiO2 nanoparticles for the analysis of biological and natural water samples by ICP-AES

In this article, a new method that utilizes a diethyldithiocarbamate-modified nanometre TiO₂ (TiO₂–DDTC) as solid-phase extractant has been developed for simultaneous preconcentration of trace Cu(II), Pb(II), Zn(II), and Cd(II) prior to measurement by inductively coupled plasma atomic emission spectrometry (ICP-AES). The separation/preconcentration conditions of analytes, which include the effects of pH, sample flow rate and volume, elution conditions, and interfering ions on the recovery of the analytes, were investigated. At pH 5, the adsorption capacity of modified nanometre TiO₂–DDTC was found to be 6.2, 19, 4.7, and 6.0?mg/g for Cu(II), Pb(II), Zn(II), and Cd(II), respectively. According to the definition of IUPAC, the detection limits (3σ) of this method for Cu(II), Pb(II), Zn(II), and Cd(II) were 0.41, 1.7, 0.39, and 0.52?ng/mL, respectively. The proposed method achieved satisfied results when applied to the determinations of trace Cu(II), Pb(II), Zn(II), and Cd(II) in biological and natural water samples.     

紫外光辐照下CH3NH3PbI3基钙钛矿太阳能电池失效机制

随着光伏产业的不断发展,有机无机杂化钙钛矿太阳能电池的研发成为科学与工业界广泛关注的焦点。到目前为止,其光电转换效率已经提高到了25.2%,成为替代硅基太阳能电池的核心方案之一。然而,钙钛矿太阳能电池的稳定性较差,容易受到环境中氧气、水分、温度甚至光照的影响,这严重制约了其大规模推广与应用。大量科学研究表明,如何避免紫外辐照下有机无机杂化钙钛矿太阳能电池的性能衰减,对于提高钙钛矿太阳能电池的光照稳定性至关重要。然而到目前为止,仍然没有系统的工作来对紫外辐照下钙钛矿太阳能电池性能以及微结构演化过程进行详细的表征与分析。本文中,我们利用聚焦离子束-扫描电子显微分析(FIB-SEM)以及球差校正透射电子显微分析(TEM)等技术,全面地研究了紫外辐照过程中有机无机杂化钙钛矿太阳能电池性能变化规律以及电池微结构演化特征。实验结果表明,紫外辐照过程中太阳能电池内部会形成0.5–0.6 V的内建电场,钙钛矿中的I^-离子在电场的驱动下向金属Au电极和空穴传输层2, 2’, 7, 7’-四[N, N-二(4-甲氧基苯基)氨基]-9, 9'-螺二芴(Spiro-OMeTAD)一侧迁移;随后,空穴传输层与金电极的界面处,碘离子与光生空穴一起与金电极发生反应,将金属态Au氧化成离子态Au⁺。而Au⁺离子则在内建电场的驱动下反向迁移穿过钙钛矿MAPbI₃层,直接被SnO₂和MAPbI₃界面处的电子还原形成金属Au纳米团簇。除此之外,紫外辐照过程中钙钛矿太阳能电池性能降低的同时,往往伴随着Spiro-OMeTAD与钙钛矿界面处物质迁移、钙钛矿薄膜内晶界展宽以及Au纳米颗粒周围MAPbI₃物相分解等现象。以上各种因素的协同作用,共同导致了紫外光照下有机无机杂化钙钛矿太阳能电池光电转换性能(PCE)、开路电压(V_oc)以及短路电流(J_sc)等性能参数的急剧下降。     

Microalgae separation by inertia-enhanced pinched flow fractionation

To improve the accuracy and efficiency of ships’ ballast water detection, the separation of microalgae according to size is significant. In this article, a method to separate microalgae based on inertia-enhanced pinched flow fractionation (iPFF) was reported. The method utilized the inertial lift force induced by flow to separate microalgae according to size continuously. The experimental results show that, as the Reynolds number increases, the separation effect becomes better at first, but then stays unchanged. The best separation effect can be obtained when the Reynolds number is 12.3. In addition, with the increase of the flow rate ratio between sheath fluid and microalgae mixture, the separation effect becomes better and the best separation effect can be obtained when the flow rate ratio reaches 10. In this case, the recovery rate of Tetraselmis sp. is about 90%, and the purity is about 86%; the recovery rate of Chlorella sp. is as high as 99%, and the purity is about 99%. After that, the separation effect keeps getting better but very slowly. In general, this study provides a simple method for the separation of microalgae with different sizes, and lays a foundation for the accurate detection of microalgae in the ballast water.     

确定性矩阵可分离压缩成像

针对可分离压缩传感使用的可分离随机正交矩阵在处理大尺度图像等高维信号感知时难度太大或成本过高的问题,引入确定性测量矩阵,提出确定性矩阵可分离压缩传感,可将如托普利兹矩阵及循环矩阵等具有确定性结构的矩阵作为可分离压缩传感的左、右可分离矩阵.该方案可以降低独立元素的数目,从而显著降低前端物理实现的难度与成本.数值模拟实验分别评估了该方法在不同采样率及不同图像尺寸下的压缩重建性能,结果表明该方法在独立元素非常少的情形下得到与原随机正交矩阵相近的重建质量,证明了其可行性.     

Electrochemiluminescence Sensor for Selective Preconcentration and Sensitive Detection of Napropamide Using Water‐Soluble Sulfonated Graphene

A novel electrochemiluminescence (ECL) sensor for napropamide determination was prepared using the water‐soluble sulfonated graphene (sulfonated‐G) as solid‐phase microextraction (SPME) material, based on selective preconcentration of target onto an electrode and followed by luminol ECL detection. The effects of pH, adsorption time, buffer solution and the luminescence agent on ECL intensity were optimized. Under the optimized conditions (pH 6; adsorption time 5 min; buffer solution pH 11.0 Na₂CO₃ aHCO₃; luminescence agent luminol; stirring speed 400 rpm), the lowest detection limits (1.0 µg L⁻¹) and good linear range (r²≥0.99) were obtained for the analyte, indicating the superior performance of Nafion/sulfonated‐G/GCE for detecting napropamide.     

An E1-Catalyzed Chemoenzymatic Strategy to Isopeptide-N-Ethylated Deubiquitylase-Resistant Ubiquitin Probes

Triazole-based deubiquitylase (DUB)-resistant ubiquitin (Ub) probes have recently emerged as effective tools for the discovery of Ub chain-specific interactors in proteomic studies, but their structural diversity is limited. A new family of DUB-resistant Ub probes is reported based on isopeptide-N-ethylated dimeric or polymeric Ub chains, which can be efficiently prepared by a one-pot, ubiquitin-activating enzyme (E1)-catalyzed condensation reaction of recombinant Ub precursors to give various homotypic and even branched Ub probes at multi-milligram scale. Proteomic studies using label-free quantitative (LFQ) MS indicated that the isopeptide-N-ethylated Ub probes may complement the triazole-based probes in the study of Ub interactome. Our study highlights the utility of modern protein synthetic chemistry to develop structurally and new families of tool molecules needed for proteomic studies.     

Hyperbranched Poly(ester‐enamine) from Spontaneous Amino‐yne Click Reaction for Stabilization of Gold Nanoparticle Catalysts

Hyperbranched polymers have garnered much attention due to attractive properties and wide applications, such as drug‐controlled release, stimuli‐responsive nano‐objects, photosensitive materials and catalysts. Herein, two types of novel hyperbranched poly(ester‐enamine) (hb‐PEEa) were designed and synthesized via the spontaneous amino‐yne click reaction of A₂ monomer (1, 3‐bis(4‐piperidyl)‐propane (A_2a) or piperazine (A_2b)) and B₃ monomer (trimethylolpropanetripropiolate). According to Flory's hypothesis, gelation is an intrinsic problem in an ideal A₂+B₃ polymerization system. By controlling the polymerization conditions, such as monomer concentration, molar ratio and rate of addition, a non‐ideal A₂+B₃ polymerization system can be established to avoid gelation and to synthesize soluble hb‐PEEa. Due to abundant unreacted alkynyl groups in periphery, the hb‐PEEa can be further functionalized by different amino compounds or their derivates. The as‐prepared amphiphilic PEG‐hb‐PEEa copolymer can readily self‐assemble into micelles in water, which can be used as surfactant to stabilize Au nanoparticles (AuNPs) during reduction of NaBH₄ in aqueous solution. As a demonstration, the as‐prepared PEG‐hb‐PEEa‐supported AuNPs demonstrate good dispersion in water, solvent stability and remarkable catalytic activity for reduction of nitrobenzene compounds.