On the Physical Origin of Long-Ranged Fluctuations in Fluids in Thermal Nonequilibrium States

Thermodynamic fluctuations in systems that are in nonequilibrium steady states are always spatially long ranged, in contrast to fluctuations in thermodynamic equilibrium. In the present paper we consider a fluid subjected to a stationary temperature gradient. Two different physical mechanisms have been identified by which the temperature gradient causes long-ranged fluctuations. One cause is the presence of couplings between fluctuating fields. Secondly, spatial variation of the strength of random forces, resulting from the local version of the fluctuation-dissipation theorem, has also been shown to generate long-ranged fluctuations. We evaluate the contributions to the long-ranged temperature fluctuations due to both mechanisms. While the inhomogeneously correlated Langevin noise does lead to long-ranged fluctuations, in practice, they turn out to be negligible as compared to nonequilibrium temperature fluctuations resulting from the coupling between temperature and velocity fluctuations.     

成分和厚度的依赖

通过调整Mn的成分，系统地研究了Ni81Fe19/Ni100-xMnx双层膜的磁学性质，特别是交换偏置场(Hex)的变化.当Ni100-xMnx中Mn的原子百分比在534%到600%之间时，对于150nm的Ni81Fe19，得到了最大的交换偏置场175kA/m，同时由于Mn对Ni81Fe19层的扩散所造成的磁矩的降低小于20%；高角x射线衍射证明Ni100-xMnx的晶格常数随着Mn成分的改变而变化，Mn含量越多，其晶格常数越大；制备态Ni100-xMnx膜晶格常数与θ相NiMn膜晶格常数的接近程度与NiMn膜θ相形成的容易程度相对应.也研究了交换偏置场随着Ni１００-xMnx厚度的变化，第一次得到了当Ni100-xMnx中Mn的原子百分比为706%时，Ni81Fe19(150nm)/Ni100-xMnx(90nm)双层膜在经过240℃，5h退火后，可以有80kA/m的交换偏置场，此时铁磁层磁矩的大小几乎不变. 关键词： Ni81Fe19/Ni100-xMnx 交换偏置场     

Properties of physisorbed water layers on gold revealed in a FEM study

Field emission study of thin water layers was performed to examine their properties and their changes after application of a high electric field. Comparison of field emission characteristics of water layers adsorbed on clean tungsten and gold-covered tungsten suggested that, whereas water molecules adsorbed on tungsten are oriented by oxygen atoms towards the metal surface, water layer on gold-covered tungsten has amorphous character with no preferential orientation. Both heated and non-heated layers are heavily influenced by applied high electric field strengths (F ≈30 MV/cm). Decrease of the work function and of the voltage needed for a constant emission current during successive increase of the electric field was tentatively interpreted in terms of chemical and morfological changes of the water layer due to the field dissociation and solvation.     

Numerical Modeling of Interior Ballistics Processes in Light Gas Guns

An improved procedure for modeling the operation of a light-gas gun is proposed. The motion of working bodies in both the firing chamber and the light-gas chamber is studied within the framework of the mechanics of heterogeneous media. The problem of barrel heating taking into account its melting and removal of thermal ablation products into the medium inside the bore is solved in a coupled formulation. Heat and mass transfer and friction on the barrel surface are calculated using empirical dependences. The deformable piston is considered compressible and elastoviscoplastic. Allowance is made for the presence of a clearance between the lateral surface of the piston and the barrel bore walls and the associated gas flow between the firing and the light-gas chamber. Calculation results are given.     

Mesoscopic details of crack tip deformation field by application of differential interference contrast method

An experimental method is developed to examine the near tip deformation at the mesoscopic scale level. The differential interference contrast (DIC) method is used by application of the Nomarski prism in polarized microscope for measuring the out of surface deformation. The method is very sensitive to small height changes detected by different interference color. Discussed are results for the crack tip deformation field.     

Highly strained InxGa(1−x)As−InyAl(1−y)As (x>0.8,y<0.3) layers for short wavelength QWIP and QCL structures grown by MBE

Highly strained quantum cascade laser (QCL) and quantum well infrared photodetector (QWIPs) structures based on In_xGa_(1−x)As−In_yAl_(1−y)As (x>0.8,y<0.3) layers have been grown by molecular beam epitaxy. Conditions of exact stoichiometric growth were used at a temperature of 420°C to produce structures that are suitable for both emission and detection in the 2–5 μm mid-infrared regime. High structural integrity, as assessed by double crystal X-ray diffraction, room temperature photoluminescence and electrical characteristics were observed. Strong room temperature intersubband absorption in highly tensile strained and strain-compensated In_0.84Ga_0.16As/AlAs/In_0.52Al_0.48As double barrier quantum wells grown on InP substrates is demonstrated. Γ–Γ intersubband transitions have been observed across a wide range of the mid-infrared spectrum (2–7 μm) in three structures of differing In_0.84Ga_0.16As well width (30, 45, and 80 Å). We demonstrate short-wavelength IR, intersubband operation in both detection and emission for application in QC and QWIP structures. By pushing the InGaAs–InAlAs system to its ultimate limit, we have obtained the highest band offsets that are theoretically possible in this system both for the Γ–Γ bands and the Γ–X bands, thereby opening up the way for both high power and high efficiency coupled with short-wavelength operation at room temperature. The versatility of this material system and technique in covering a wide range of the infrared spectrum is thus demonstrated.     

Growth of germanium nanoislands and nanowires on singular and vicinal Si(111) surfaces prior to the formation of a wetting layer

Physics of the Solid State - The growth of germanium nanoislands and nanowires on singular and vicinal Si(111) surfaces is investigated by scanning tunneling microscopy (STM). It is shown that the...     

Synthesis of ordered Ge-Si heterostructures containing ultrasmall germanium nanoclusters

Different techniques for the fabrication of structures containing ensembles of ultrasmall germanium nanoclusters distributed with a high density over the substrate surface are discussed. How to control the morphology and ordering of these ensembles is also discussed.     

Completely biodegradable composites of poly(propylene carbonate) and short,lignocellulose fiber Hildegardia populifolia

The composites of biodegradable poly(propylene carbonate) (PPC) reinforced with short Hildegardia populifolia natural fiber were prepared by melt mixing followed by compression molding. The mechanical properties, thermal properties, and morphologies of the composites were studied via static and dynamic mechanical measurements, thermogravimetric analysis, and scanning electron microscopy (SEM) techniques, respectively. Static tensile tests showed that the stiffness and tensile strength of the composites increased with an increasing fiber content. However, the elongation at break and the energy to break decreased dramatically with the addition of short fiber. The relationship between the experimental results and the compatibility or interaction between the PPC matrix and fiber was correlated. SEM observations indicated good interfacial contact between the short fiber and PPC matrix. Thermogravimetric analysis revealed that the introduction of short Hildegardia populifolia fiber led to a slightly improved thermooxidative stability of PPC. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 666–675, 2004