Phosphorescent Cyclometalated Iridium(III) Complexes That Contain Substituted 2‐Acetylbenzo[b]thiophen‐3‐olate Ligand for Red Organic Light‐Emitting Devices

We report the synthesis of a new class of thermally stable and strongly luminescent cyclometalated iridium(III) complexes 1 – 6 , which contain the 2‐acetylbenzo[b]thiophene‐3‐olate (bt) ligand, and their application in organic light‐emitting diodes (OLEDs). These heteroleptic iridium(III) complexes with bt as the ancillary ligand have a decomposition temperature that is 10–20 % higher and lower emission self‐quenching constants than those of their corresponding complexes with acetylacetonate (acac). The luminescent color of these iridium(III) complexes could be fine‐tuned from orange (e.g., 2‐phenyl‐6‐(trifluoromethyl)benzo[d]thiazole (cf₃bta) for 4 ) to pure red (e.g., lpt (Hlpt=4‐methyl‐2‐(thiophen‐2‐yl)quinolone) for 6 ) by varying the cyclometalating ligands (C‐deprotonated C^N). In particular, highly efficient OLEDs based on 6 as dopant (emitter) and 1,3‐bis(carbazol‐9‐yl)benzene (mCP) as host that exhibit stable red emission over a wide range of brightness with CIE chromaticity coordinates of (0.67, 0.33) well matched to the National Television System Committee (NTSC) standard have been fabricated along with an external quantum efficiency (EQE) and current efficiency of 9 % and 10 cd A^?1, respectively. A further 50 % increase in EQE (>13 %) by replacing mCP with bis[4‐(6H‐indolo[2,3‐b]quinoxalin‐6‐yl)phenyl]diphenylsilane (BIQS) as host for 6 in the red OLED is demonstrated. The performance of OLEDs fabricated with 6 (i.e., [(lpt)₂Ir(bt)]) was comparable to that of the analogous iridium(III) complex that bore acac (i.e., [(lpt)₂Ir(acac)]; 6 a in this work) [Adv. Mater.­ 2011 , 23, 2981] fabricated under similar conditions. By using ntt (Hnnt=3‐hydroxynaphtho[2,3‐b]thiophen‐2‐yl)(thiophen‐2‐yl)methanone) ligand, a substituted derivative of bt, the [(cf₃bta)₂Ir(ntt)] was prepared and found to display deep red emission at around 700 nm with a quantum yield of 12 % in mCP thin film.     

Macrocycle Dynamics in a Branched [8]Catenane Controlled by Three Different Stimuli in Three Different Regions

A branched [8]catenane from an efficient one-pot synthesis (72 % HPLC yield, 59 % isolated yield) featuring the simultaneous use of three kinds of templates and cucurbit[6]uril-mediated azide–alkyne cycloaddition (CBAAC) for ring-closing is reported. Design and assembly of the [8]catenane precursors are unexpectedly complex that can involve cooperating, competing and non-influencing interactions. Due to the branched structure, dynamics of the [8]catenane can be modulated in different extent by rigidifying/loosening the mechanical bonds at different regions by using solvent polarity, acid-base and metal ions as the stimuli. This work not only highlights the importance of understanding the delicate interplay of the weak and non-obvious supramolecular interactions in the synthesis of high-order [n]catenane, but also demonstrates a complex control of dynamics and flexibility for exploiting [n]catenanes applications.     

苯酚(醌)与烯烃的不对称[3+2]环化反应: 手性二氢苯并呋喃的合成进展

二氢苯并呋喃结构单元广泛存在于具有良好生物活性和药用价值的天然产物之中, 因而引起了有机合成化学家和药物化学家们的关注. 针对该结构单元所包含的C2和C3邻二立体中心的对映选择性构建, 也是目前有机合成方法学研究的挑战性问题之一. 在众多解决方案中, 以苯酚(醌)与烯烃为底物, 具体采用催化不对称和手性辅剂诱导的[3+2]环化两种方式, 可以构建具有光学活性的二氢苯并呋喃结构单元. 本综述将不同类型的手性催化剂和手性辅剂进行分类梳理, 介绍了近年来不对称[3+2]环化反应的发展, 并重点剖析其中涉及的立体选择性控制. 同时, 简要介绍了该关键方法在二氢苯并呋喃天然产物合成中的应用. 为了启发更加高效和普适性的新催化体系出现, 最后总结和展望了不对称[3+2]环化反应的发展趋势.     

钠离子电池用高性能锑基负极材料的调控策略研究进展

锑(Sb)具有高的理论比容量、较小的电极极化、合适的Na⁺脱嵌电位、价格低廉以及环境友好的优势,而成为一种具有较大应用前景的钠离子电池负极材料。但是,Sb基负极材料的一个重要挑战是在循环过程中高比容量伴随着大的体积变化,进而导致活性材料粉化,并从集流体上脱落,这大大限制了其在钠离子电池领域的大规模应用。因此,如何解决Sb基负极材料充放电过程中体积膨胀问题对于高性能的钠离子电池设计是至关重要的。本文详细综述和讨论了Sb基材料的结构-性能关系及其在钠离子电池中的应用,详细介绍了钠离子电池Sb基负极材料在氧化还原反应机理、形貌设计、结构-性能关系等方面的最新研究进展。本综述的主要目的是探讨影响Sb基负极材料性能的决定因素,从而提出有前途的改性策略,以提高其可逆容量和循环稳定性。最后,对Sb基钠离子电池负极材料的未来发展、面临的挑战和前景进行了展望。本文可为Sb负极材料的构建和优化提供具体的观点,阐明了Sb基负极材料未来的发展方向,从而促进钠离子电池的快速发展和实际应用。     

Polyimidazolyl acetate ionic liquid grafted on cellulose filter paper as thin-film extraction phase for extraction of non-steroidal anti-inflammatory drugs from water

Recently, pharmaceuticals and personal care products in the water environment exhibited potential risks to both human and aquatic organisms. In order to improve the sensitivity and accuracy of pharmaceutical detection, the polyimidazolyl acetate ionic liquid was synthesized by Radziszewski reaction and coated on cellulose filter papers as a thin-film extraction phase for extraction of non-steroidal anti-inflammatory drugs from water. The attenuated total reflection-infrared spectrometry, thermogravimetric analysis, and scanning electron microscope analyses demonstrated that the polyimidazolyl acetate ionic liquid was successfully prepared and attached to the surface of the cellulose filter paper through chemical bonding. The adsorption capacity of the homemade thin-film extraction material for the four non-steroidal anti-inflammatory drugs was greater than 8898 ng/cm² under the optimum conditions, and the desorption rate was over 90%. Then, a paper-based thin-film extraction phase-high-performance liquid chromatography-tandem mass spectrometry method was established for the extraction of non-steroidal anti-inflammatory drugs in water. This method provided limits of detection and limits of quantification were in the range of 0.02–0.15 and 0.17–0.50 μg/L, respectively. Hence, the obtained thin-film extraction phase showed excellent recovery and reproducibility for the target non-steroidal anti-inflammatory drugs with carboxyl groups from water.     

Photophysical Study and Biological Applications of Synthetic Chalcone-Based Fluorescent Dyes

A chalcone series (3a–f) with electron push–pull effect was synthesized via a one-pot Claisen–Schmidt reaction with a simple purification step. The compounds exhibited strong emission, peaking around 512–567 nm with mega-stokes shift (∆λ = 93–139 nm) in polar solvents (DMSO, MeOH, and PBS) and showed good photo-stability. Therefore, 3a–f were applied in cellular imaging. After 3 h of incubation, green fluorescence was clearly brighter in cancer cells (HepG2) compared to normal cells (HEK-293), suggesting preferential accumulation in cancer cells. Moreover, all compounds exhibited higher cytotoxicity within 24 h toward cancer cells (IC₅₀ values ranging from 45 to 100 μM) than normal cells (IC₅₀ value >100 μM). Furthermore, the antimicrobial properties of chalcones 3a–f were investigated. Interestingly, 3a–f exhibited antibacterial activities against Escherichia coli and Staphylococcus aureus, with minimum bactericidal concentrations (MBC) of 0.10–0.60 mg/mL (375–1000 µM), suggesting their potential antibacterial activity against both Gram-negative and Gram-positive bacteria. Thus, this series of chalcone-derived fluorescent dyes with facile synthesis shows great potential for the development of antibiotics and cancer cell staining agents.     

Computational studies on two novel energetic nitrogen‐rich compounds based on tetrazolone

Two novel energetic nitrogen‐rich compounds 1,4‐diaminotetrazol‐5‐one ( DATO ) and 1,4‐dinitrotetrazol‐5‐one ( DNTO ) were proposed first and studied by quantum chemistry method with B3LYP/6‐31G* level of theory. The optimized geometry, IR predicted spectrum and thermochemical parameters, frontier molecular orbitals and molecular electrostatic potential were calculated for inspecting the electronic structure, molecular stability and chemical reactivity. The important macroscopic properties including density, enthalpy of formation, detonation parameters and impact sensitivity have been predicted as well. As a result, two designed compounds DATO and DNTO possess positive enthalpy of formation (395.79 and 342.77 kJ/mol), impressive detonation parameters (D = 8.80 km/s, P = 33.69 GPa; D = 8.89 km/s, P = 34.98 GPa) superior to the remarkable explosive RDX, acceptable sensitivities and might be promising candidates of energetic materials. Copyright © 2015 John Wiley & Sons, Ltd.