A trinickel dipyridylamido complex with metal-metal bonding interaction: prelude to polynickel molecular wires and devices?

The molecule Ni(3)(dpa)(4)Cl(2) (1) can be oxidized by AgPF(6) to give crystalline Ni(3)(dpa)(4)(PF(6))(3) (2) (dpa is the anion of di(2-pyridyl)amine). This reversible oxidation occurs at a potential of 0.908 V vs Ag/AgCl electrochemically. The X-ray structure of 2 shows that the oxidation causes a major structural change (even though it is reversible), namely, a contraction of the Ni-Ni distances from ca. 2.43 A to 2.284[1] A. In addition, the electronic structure changes so that from four unpaired electrons in 1 there is only one in 2. From these remarkable results, it is inferred that while 1, and all higher homologues with 5, 7, 9,... nickel atoms are poor electronic conductors, the cations obtainable from them may be much better ones. This in turn means that by controlling the oxidation state electrochemically, these molecules may be able to function as nanoscale diodes.     

Computer experiments on crystalline nylons: structural analysis of nylons with large aliphatic segments

A theoretical study based on force-field calculations has been performed to investigate the structural preferences of crystalline even nylons n with large and very large aliphatic segments. Atomistic energy calculations and Monte Carlo simulations were carried out considering the conventional and forms of nylons 10, 12, 18, 24, and 32. Results indicated that the form is the most favored for nylons 10, 12, 18, and 24. However, the structure was unstable for nylon 32, a polymer in which the density of hydrogen bonds is almost negligible. In this case, the arrangement is energetically more favored than the one.     

Comparative performance of MM3(92) and two TINKER MM3 versions for the modeling of carbohydrates

The 1992 version of MM3 was largely used for modeling mono-, di-, and trisaccharides. In later versions of MM3 improvements were made in some parameters that may be important for carbohydrates. This corrected MM3 force field is part of the Tinker package, freely available (as its 4.1 version), and included in the Chem 3D Ultra 8.0 package (as the 3.7 version). The latter version lacks the corrections to the standard bond lengths produced by electronegativity and anomeric effects, whereas the Tinker 4.1 version only lacks the latter correction. The present work compares the performance of the three MM3 versions (and in some cases, DFT and/or HF/ab initio procedures) on several carbohydrate model problems as the chair and rotamer equilibria in 2-hydroxy- and 2-methoxytetrahydropyran, hydrogen bonding in cis-2,3-dihydroxytetrahydropyran, and the potential energy surfaces around the glycosidic bonds of two sulfated disaccharides and two trisaccharides. Tinker MM3 can be used accurately to estimate carbohydrate energies and geometries, and-with the help of some programming-to pursue studies on the potential energy surfaces of di- and trisaccharides. In most cases results obtained using the three MM3 versions are similar, although large energy differences are obtained when comparing a rotameric distribution around a O-C-O-H dihedral, which is almost forced to the exo-anomeric position by the Tinker versions. In other systems smaller energy differences are found, but they can nevertheless lead to a different global minimum when comparing conformers of similar energy. MM3(92) establishes better the differences between the bond lengths in both anomers, as an expected expression of the anomeric correction.     

The influence of microhydration on the ionization energy thresholds of uracil and thymine

In the present study the ionization energy thresholds (IET's) of uracil and thymine have been calculated (with the B3LYP, PMP2, and P3 levels of theory using the standard 6-31++G(d,p) basis set) with one to three water molecules placed in the first hydration shell. Then (B3LYP) polarizable continuum model (PCM) calculations were performed with one to three waters of the hydration shell included. Calculations show there is a distinct effect of microhydration on uracil and thymine. For uracil, one added water results in a decrease in the IET of about 0.15 eV. The second and third water molecules cause a further decrease by about 0.07 eV each. For thymine, the first water molecule is seen to decrease the IET by about 0.1 eV, while the second and third water molecules cause a further decrease of less than 0.1 eV each. The changes in IET calculated here for thymine with one to three waters of hydration are smaller than the experimental values determined by Kim et al. (Kim, S. K.; Lee, W.; Herschbach, D. R. J. Phys. Chem. 1996, 100, 7933). Preliminary results presented here indicate that the experimental results may involve keto-enol tautomers of thymine. The results of placing the microhydrated structures of uracil and thymine in a PCM cavity was seen to make very little difference in the IET when compared to the IET of ordinary uracil or thymine in a PCM cavity. The implications are that accurate calculations of the IET's of uracil and thymine can be obtained by simply considering long-range solvation effects.     

E- and Z-isomerism of 2-acetylthiophene oximes

A study on the oximation of a number of 2-acetylthiophenes in order to ascertain the validity of contradictory results previously described is reported. The fact that the steric hindrance is smaller in 2-acetylthiophenes unsubstituted at position-3 than in acetylbenzenes allows in these cases the formation of Z oximes, which even can predominate on the E oximes in the case of a + M substitution at position-5. In the paper is also shown that the E/Z ratio of 2-acetylthiophene oximes can be deduced from the ¹H-nmr spectrum of the crude oxime mixture.     

Preparation and Chemical and Biological Studies of the Novel Complex μ-1,4,5-triphenyl-1,3,4-triazole-2-thiolate-bis[dichlorotriethylphosphineplatinum(II)]a

The mesoionic compound, 1,4,5-triazole-2-thiolate, is a versatile ligand, capable of binding metal centres in different ways. The present study shows how it reacts with the bridging platinum(II) complex μ-dichlorobis[(chlorotriethylphosphineplatinum(II)], [Pt₂(PEt₃)₂Cl₄], originating a bimetallic complex. Both the sulphur atom and nitrogen 3 behave as basic sites, coordinating different platinum centres. An interesting isomerization process, shown by ³¹P{¹H} n.m.r. spectroscopy, occurs at the S-bonded platinum moiety, resulting in a fluxional behaviour of the complex. It is also shown to target CT-DNA with moderate binding affinity.To the memory of Dr. Wagner M. Teles (1971–2004).     

Synthesis and spectral properties of 2,3-dihydro-4-(para-substituted-phenyl)-7-[(o-, m-, and p-substituted)phenoxy]-1H-1,5-benzodi-azepine-2-thiones

A series of twelve new 2,3-dihydro-4-(para-substituted-phenyl)-7-[(o-, m-, and p-substituted)phenoxy]-1H-1,5-benzodiazepine-2-thiones, which have potentially useful pharmacological properties, has been synthesized by condensing the 3,3-dimercapto-1-(para-substituted phenyl)-2-propen-1-one with 3,4-diaminophenyl-R-phenyl ethers. The structure of all products was corroborated by ir, ¹H-nmr, ¹³C-nmr and ms.     

Theoretical strategy to provide atomistic models of comblike polymers: a generation algorithm combined with configurational bias Monte Carlo

A computational strategy to model the amorphous phase of comblike polymers is presented. The strategy, denoted SuSi/CB (CB-configurational bias), combines the strength of an algorithm recently developed to generate reliable microstructures of dense amorphous polymers, which is based on a random search of energy minima, and configurational bias Monte Carlo method. The influence of different parameters used to define the characteristics of SuSi/CB on both the reliability of the generated structures and the computational effort has been examined in detail. Finally, we have modeled and characterized the supramolecular organization of poly(octadecyl acrylate) in the amorphous state.     

Cascade alkenyl amination/Heck reaction promoted by a bifunctional palladium catalyst: a novel one-pot synthesis of indoles from o-haloanilines and alkenyl halides

A novel approach for the synthesis of the important indole ring is described. Indoles are obtained from o-bromoanilines and alkenyl halides in a Pd-catalyzed cascade process that involves an alkenyl amination followed by an intramolecular Heck reaction. The overall process represents the first example of the participation of alkenyl amination reactions in Pd-catalyzed cascade reactions. Initially, the relative reactivity of aryl and alkenyl bromides and chlorides towards Pd-catalyzed amination was investigated. Competition experiments were carried out in the presence of primary and secondary amines, and these revealed the reactivity order alkenyl bromides > aryl bromides > alkenyl chlorides > aryl chlorides, as well as very high chemoselectivity; the more reactive halide was always favored. Thereafter, optimized reaction conditions for the sequential alkenyl amination/Heck cyclization to give indoles were investigated with the model reaction of o-bromoaniline with alpha-bromostyrene. An extensive screening of ligands, bases, and reaction conditions revealed that the [Pd2(dba)3]/DavePhos, NaOtBu, toluene combination at 100 degrees C were the optimized reaction conditions to carry out the cascade process (dba=dibenzylideneacetone, DavePhos=2-dicyclohexylphosphino-2'-N,N-dimethylaminobiphenyl). The reaction proceeds with aryl, alkyl, and functionalized substitutents in both starting reactants. The cyclization was also studied with N-substituted o-bromoanilines (which would give rise to N-substituted indoles); however, in this case, indole formation occurred only with 1-substituted-2-bromoalkenes. Finally, the application of this methodology to o-chloroanilines required further optimization. Although the catalyst based on DavePhos failed to promote the cascade process, a catalytic combination based on [Pd2(dba)3]/X-Phos promoted the formation of the indole ring also from the less reactive chloroanilines.