Fatty acids influence "solid" phase formation in models of stratum corneum intercellular membranes

Stacked intercellular lipid membranes in the uppermost epidermal layer, the stratum corneum (SC), are responsible for skin's barrier function. These membranes are unique in composition, the major lipids being ceramides (Cer), cholesterol, and free fatty acids (FFA) in approximately equimolar proportions. Notably, SC lipids include chains much longer than those of most biological membranes. Previously we showed that Cer's small hydrophilic headgroup enabled SC model membranes composed of bovine brain ceramide (BBCer), cholesterol, and palmitic acid in equimolar proportion to solidify at pH 5.2. In order to determine the influence of FFA chain length on the phase behavior of such membranes, we used 2H NMR and FT-IR to study BBCer/cholesterol/FFA dispersions containing linear saturated FFA 14-22 carbons long. Independent of chain length, the solid phase dominated the FFA spectrum at physiological temperature. Upon heating, each dispersion underwent phase transitions to a liquid crystalline phase (only weakly evident for the membrane containing FFA-C22) and then to an isotropic phase. The phase behavior, the lipid mixing properties, and the transition temperatures are shown to depend strongly on FFA chain length. A distribution of FFA chain lengths is found in the SC and could be required for the coexistence of a proportion of solid lipids with some more fluid domains, which is known to be necessary for normal skin barrier function.     

C60 and C70 fullerene isomers generated in flames. Detection and verification by liquid chromatography/mass spectrometry analyses.

Fullerenes C60 and C70, generated by combustion, have been shown previously to be produced in controlled laminar flames accompanied by other compounds having fullerene-like characteristics. Analysis of these additional compounds by high-performance liquid chromatography, coupled on-line with mass spectrometry has identified them as isomers of the C60 and C70 fullerenes. The newly observed isomers have characteristic UV spectra and are thermally unstable, undergoing conversion to the more stable fullerenes with a half-life of about 1 h in boiling toluene (111 degrees C). Isomers of C60 and C70 fullerenes previously have been studied theoretically, but not observed experimentally. The flame-generated material also contains C60O and C70O compounds, as well as C76 and higher carbon clusters.     

Permeability and thermodynamics study of quaternary ammonium surfactants-phosphocholine vesicle system

Quaternary ammonium compounds (QACs) are recognized as membrane active agents widely used as biocides. The main purpose of this work was to investigate the influence of the QAC head group and acyl chain length on their permeability-perturbing power and on their affinity for lipidic membranes. Permeability perturbations were assessed by measuring the release of calcein entrapped inside vesicles. The affinity of QACs for bilayers was investigated by isothermal titration calorimetry (ITC). QACs bearing C(16) chain were found to be more efficient to decrease the membrane permeability than their C(12) analogues. On the other hand, the chemical nature of the ammonium head group has practically no influence on the permeability perturbations caused by QACs bearing C(16) chains. It was difficult to assess the partitioning of the QACs between the aqueous and lipid phases since the ITC signals could also be associated to morphological changes such as vesicle aggregation. For the systems for which reliable thermodynamic parameters could be obtained, the Gibbs energy of transfer was similar to that for the micellization. The entropy variation represented the main contribution to the Gibbs energy, indicating that the insertion of QACs inside lipidic bilayers is driven by hydrophobic interactions.     

Effects of organic solvents on the scission energy of rodlike micelles

The linear viscoelastic response of erucyl bis(hydroxyethyl) methylammonium chloride with added KCl has been studied as a function of temperature and nonpolar solvent addition. The plateau modulus is independent of temperature from 25 to 40 degrees C, in contrast to previous studies with salicylate counterions that showed a plateau modulus increasing with temperature over this range. The average micelle length, L, predicted by the model of Cates, depends experimentally on Escis/kBT, where Escis is the scission energy of the chain and kBT is the Boltzmann constant times the absolute temperature. With ethanol addition, the calculated average contour length, L, decreases by a factor of 4 as ethanol concentration varies from 0 to 1.3 M. This corresponds to an apparent energy for scission, Escis, decrease from 81 +/- 8 to 74 +/- 7 kJ/mol. On the other hand, only 80 mM of hexane is required to cause a decrease in Escis to the same level, and for hexane addition levels above 70 mM a disruption in the plateau modulus indicates the disruption of the rodlike structure. The correspondence between the effect of temperature and the effect of solvent addition allows the development of "solvent/temperature" superposition rules to predict the rheology of these viscoelastic fluids at elevated temperatures.     

A simple FTIR spectroscopic method for the determination of the lower critical solution temperature of N‐isopropylacrylamide copolymers and related hydrogels

Linear and crosslinked polymers based on N‐isopropylacrylamide (NIPAAm) exhibit unusual thermal properties. Aqueous solutions of poly(N‐isopropylacrylamide) (PNIPAAm) phase‐separate upon heating above a lower critical solution temperature (LCST), whereas related hydrogels undergo a swelling–shrinking transition at an LCST. A linear copolymer made of NIPAAm/acryloxysuccinimide (98/2 mol/mol) and two hydrogels with different hydrophilicities were prepared. Fourier transform infrared (FTIR) spectroscopy was employed to determine the transition temperature and provide insights into the molecular details of the transition via probing of characteristic bands as a function of temperature. The FTIR spectroscopy method described here allowed the determination of the transition temperature for both the linear and crosslinked polymers. The transition temperatures for PNIPAAm and the gel resulting from the crosslinking with polylysine or N,N′‐methylenebisacrylamide (MBA) were in the same range, 30–35 °C. For the gels, the transition temperature increased with the hydrophilicity of the polymer matrix. The spectral changes observed at the LCST were similar for the free chains and the hydrogels, implying a similar molecular reorganization during the transition. The C H stretching region suggests that the N‐isopropyl groups and the backbone both underwent conformational changes and became more ordered upon heating above the LCST. An analysis of the amide I band suggests that the amide groups of the linear polymer were mainly involved in hydrogen bonding with water molecules below the LCST, the chain being flexible and disordered in a water solution. During the transition, around 20% of these intermolecular hydrogen bonds between the polymer and water were broken and replaced by intramolecular hydrogen bonds. Similar changes were also observed at the LCST of a gel crosslinked with MBA. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 907–915, 2000     

Strain Stiffening Hydrogels through Self-Assembly and Covalent Fixation of Semi-Flexible Fibers

Biomimetic, strain-stiffening materials are reported, made through self-assembly and covalent fixation of small building blocks to form fibrous hydrogels that are able to stiffen by an order of magnitude in response to applied stress. The gels consist of semi-flexible rodlike micelles of bisurea bolaamphiphiles with oligo(ethylene oxide) (EO) outer blocks and a polydiacetylene (PDA) backbone. The micelles are fibers, composed of 9–10 ribbons. A gelation method based on Cu-catalyzed azide–alkyne cycloaddition (CuAAC), was developed and shown to lead to strain-stiffening hydrogels with unusual, yet universal, linear and nonlinear stress–strain response. Upon gelation, the X-ray scattering profile is unchanged, suggesting that crosslinks are formed at random positions along the fiber contour without fiber bundling. The work expands current knowledge about the design principles and chemistries needed to achieve fully synthetic, biomimetic soft matter with on-demand, targeted mechanical properties.     

Development of non-phospholipid liposomes containing a high cholesterol concentration

We present a novel formulation of non-phospholipid liposomes formed from cholesterol and palmitic acid. Despite the fact that these two lipidic species do not form individually fluid bilayers, we show that once mixed together, fluid bilayers can be obtained and, moreover, these can be extruded using classical extrusion processes to form liposomes. The chemical analysis indicates that these liposomes contain 70 mol % cholesterol, a content that is considerably higher that the saturation limit generally reported for phospholipid bilayers. These cholesterol-rich liposomes, formed with molecules that have low toxicity in vivo, display an improved impermeability relative to that of traditional phospholipid liposomes. In addition, because of the presence of palmitic acid, the stability of the liposomes is pH-dependent, and it is possible to trigger the release of encapsulated materials by pH stimuli.     

Sorption of inorganic nanoparticles in woven cellulose fabrics

Titanium dioxide was deposited from aqueous suspension onto cellulosic surfaces.Titania was sourced from Degussa (P25TM,70:30 anatase:rutile).Dry uptake of particles was shown to be rapid and dominant with one-third of the deposition occurring in less than 30 s and over one-half in the first minute.Isotherms were recorded to compare the rate of titanium deposition on dry and pre-wetted cotton.In the dry case uptake reached a maximum in 30 min whereas in the pre-wetted case the uptake was seen to continue beyond 180 min.A broad trend of higher deposition occurring at lower pH was seen,corresponding to the region where surface charges were opposite and thus attractive.Dry pickup was less significant at high pH.The response to varying ionic strength was complex and was attributed to the combined effect of charge screening,particle aggregation and consequent particle entrapment or occlusion.Titania deposition into the interstices of woven cotton sheets resulted in the formation of inorganic,nanoparticulate skeletons which could be isolated by controlled combustion of the cellulose and thus cotton was suggested to have potential for the templated synthesis of high surface area semiconductor materials.     

Progress toward multiplexed sample-to-result detection in low resource settings using microfluidic immunoassay cards

In many low resource settings multiple diseases are endemic. There is a need for appropriate multi-analyte diagnostics capable of differentiating between diseases that cause similar clinical symptoms. The work presented here was part of a larger effort to develop a microfluidic point-of-care system, the DxBox, for sample-to-result differential diagnosis of infections that present with high rapid-onset fever. Here we describe a platform that detects disease-specific antigens and IgM antibodies. The disposable microfluidic cards are based on a flow-through membrane immunoassay carried out on porous nitrocellulose, which provides rapid diffusion for short assay times and a high surface area for visual detection of colored assay spots. Fluid motion and on-card valves were driven by a pneumatic system and we present designs for using pneumatic control to carry out assay functions. Pneumatic actuation, while having the potential advantage of inexpensive and robust hardware, introduced bubbles that interfered with fluidic control and affected assay results. The cards performed all sample preparation steps including plasma filtration from whole blood, sample and reagent aliquoting for the two parallel assays, sample dilution, and IgG removal for the IgM assays. We demonstrated the system for detection of the malarial pfHRPII antigen (spiked) and IgM antibodies to Salmonella Typhi LPS (patient plasma samples). All reagents were stored on card in dry form; only the sample and buffer were required to run the tests. Here we detail the development of this platform and discuss its strengths and weaknesses.     

Hydrophobic match between cholesterol and saturated fatty acid is required for the formation of lamellar liquid ordered phases

Palmitic acid and cholesterol have been shown to form, under certain conditions, bilayers in the liquid ordered (lo) phase. In the present work, the contribution of the hydrophobic match between cholesterol (chol), and the acyl chain of saturated fatty acids (FA) has been examined. The behavior of FA/chol mixtures where the FA acyl chain length was varied between 12 and 24 carbon atoms was investigated by infrared and 2H NMR spectroscopy, as well as by differential scanning calorimetry. It was found that only fatty acids with acyl chains of 14-18 carbon atoms lead to the formation of lo phase bilayers. The length of these chains corresponds, in fact, to the length of the long axis of the cholesterol molecule. Therefore, the hydrophobic match between the apolar parts of the molecular constituents appears to be a requisite for the formation of lamellar lo phases.