二维卷积在动力学分析中的应用

本文用计算机模拟和二维卷积研究了稀土与间乙酰基偶氮氯膦的显色反应，选择不同的模型参数可描述这类反应的细节，二维卷积则增强对叠合二维谱的分辨。     

A preliminary study on fabrication of nanoscale fibrous chitosan membranes in situ by biospecific degradation

A new approach for in situ fabrication of nanoscale fibrous chitosan membrane by biospecific degradation under physiological situation was studied. The chitosan binary blend membranes were fabricated by solvent casting of chitosan solution containing highly deacetylated chitosan (HDC) and moderately deacetylated chitosan (MDC) with different ratio. The biodegradation process was performed in PBS (pH 7.4) containing lysozyme at the temperature of 37 °C. Experimental results from weight loss, reducing sugar in surrounding media, FT-IR, X-ray diffraction, gel permeation chromatography (GPC) and SEM throughout the study showed that the biospecific degradation by lysozyme had removed MDC component selectively. When the ratio of MDC in the binary blend membranes amounted to 0.5, nanoscale domains of HDC and MDC were obtained, and thus a nanoscale fibrous structure was fabricated after biospecific degradation of MDC. This nanofibrous structure and the biospecific degradation of chitosan membranes can have potential advantages and interesting implications in tissue engineering and drug delivery.     

Two new triterpenoids from Gardenia jasminoides fruits

A new cycloartane triterpenoid, named gardenolic acid C (1), a new ursane triterpenoid, named 3β,16β,21β,23,24-pentahydroxy urs-12,18,20-trien-28-oic acid γ-lactone (2), together with three know triterpenoids, gardenolic acid A (3), gardenolic acid B (4), and 3α,16β,23,24-tetrahydroxy-28-nor-ursane-12,17,19,21-tetraen (5) were isolated from the fruits of Gardenia jasminoides Ellis. The structures of these compounds were elucidated by analyses of spectroscopic data. All isolates were evaluated for their neuroprotective effects in vitro.

     

数字喷墨印刷关键技术及其实现

经过20多年的完善与发展，喷墨技术已经成为大幅面广告印刷行业的主要印刷技术。随着图书按需印刷需求的快速扩张以及国家环保政策的迅速落地，喷墨印刷技术作为一项高效环保的数字化印刷技术，得到越来越高的关注，业内普遍认为喷墨印刷技术将是数字化印刷的必然发展趋势。然而与已经成熟的多Pass喷墨印刷设备不同，单Pass喷墨印刷设备在数据带宽、数据在线重构、高精度同步控制、喷嘴在线补偿等方面有着极高的技术要求。本文首先简要介绍了喷墨技术，然后针对单Pass喷墨印刷设备需要解决的技术问题提出了相应的解决方案。依据本文技术设计的单Pass书刊喷墨印刷机已经投放市场，并且获得了用户的普遍认可。     

改进片铸与烧结技术制备高性能钕铁硼磁体的研究

通过优化合金成分设计与改进速凝片铸技术、烧结技术,应用国内通用的工业生产烧结钕铁硼磁体的各类原材料,在工业生产线上实现了45UH高性能烧结钕铁硼磁体的批量生产。SEM观察和XRD分析结果表明:磁体具有比较高的取向度;其显微组织致密、精细而均匀,平均晶粒尺寸约为5μm。45UH烧结钕铁硼磁体的典型磁性能为Br=1.363 T,Hcb=1060 kA.m-1,Hcj=2140 kA.m-1,Hk=1625 kA.m-1,(BH)max=366.0 kJ.m-3;其Hcj/79.6 kA.m-1+(BH)max/7.96 kJ.m-3=72.8。在295～453 K温度区间,其剩磁与内禀矫顽力的温度系数分别为-0.108%.K-1和-0.486%.K-1。当L/D=0.7时,在473 K保持2 h磁体开路磁通不可逆损失为4.1%左右。批量生产的45UH烧结钕铁硼磁体,其常温磁性能优异,温度稳定性良好。     

富氮多孔有机聚合物催化制备α⁃氰基肉桂酸乙酯

α-氰基肉桂酸乙酯作为含多种官能团的缺电子烯烃, 是一种极具应用价值的有机合成反应底物, 主要通过催化Knoevenagel缩合反应获得. 本文以多聚甲醛和三聚氰胺为前驱体, 采用溶剂热法制备富氮多孔有机聚合物mPMF, 经K₂CO₃处理得到K₂CO₃-mPMF-X(X=1, 10, 50). 考察了mPMF在苯甲醛和氰乙酸乙酯Knoevenagel缩合反应中的催化性能, 通过mPMF与K₂CO₃-mPMF-X催化活性的比较, 探讨了碱性强弱对Knoevenagel缩合反应的影响, 并对催化反应机理进行了探索. 结果表明, 催化剂中丰富的氮物种为反应提供了碱性环境和大量的碱性活性位点, 催化剂碱性强弱的控制是催化合成α-氰基肉桂酸乙酯的关键因素. mPMF在甲醇溶剂中于60 ℃反应3 h后, 苯甲醛转化率为97%, 目标产物选择性在99.9%以上.     

Co3O4 Decorated Ti/TiO2 Nanotubes for Photogenerated Cathodic Protection of 304 Stainless Steel

The Co₃O₄ decorated TiO₂ nanotube arrays(NTAs) coatings are fabricated by the combination of anodization and impregna-ting methods. It is found that the introduction of Co₃O₄ can reduce the diffraction intensity of (101) plane of the TiO₂ and accelerate the separation of photogenerated electron/hole pairs. In addition, the open circuit potential(OCP) and the corrosion potential of 304 stainless steel(304SS) with or without Co₃O₄ decorated TiO₂ NTAs were measured under visible light, which indicated the 304SS coupled with Co₃O₄ decorated TiO₂ NTAs had better anticorrosion performance than that of the 304SS or the 304SS coupled with pure TiO₂ NTAs. The enhancement of the cathodic protection performance of the Co₃O₄ decorated TiO₂ NTAs can be ascribed to the matched energy levels and strong interaction between Co₃O₄ and TiO₂ NTAs, and the improvement of light absorption.     

SU-8光刻胶应变分布光学全场检测方法

由于SU-8光刻胶的内应力将会影响高深宽比结构的全金属光栅的制作质量,本文针对近年来SU-8光刻胶应力测量困难的情况,提出了一种基于激光剪切散斑干涉技术的SU-8光刻胶应变分布测量的新方法。该方法通过对被测胶体加载前后两幅干涉图像的处理,直接得到被测胶体结构的全场应变分布情况,由胶体的应变变形数据即可反映出内应力的变化和分布趋势。同时使用ANSYS有限元分析软件对同一被测胶体进行应变仿真模拟研究,获得胶体结构的变形场仿真数据。组建了实验系统,进行了实验验证,结果表明:实际测量变形量约为1.189μm,仿真的最大变形量为1.088μm,测量误差在允许范围内,且测量的形变趋势与仿真模拟结果相一致,表明激光剪切散斑干涉技术可应用于SU-8光刻胶的应变分布全场无损检测。     

碳掺杂六方氮化硼/二硫化钼吸附还原六价铬和助催化降解有机污染物

针对二硫化钼(MoS₂)因易团聚导致去除六价铬[Cr(Ⅵ)]容量低的问题, 利用六方氮化硼(BN)良好的吸附性和化学稳定性, 以多巴胺作为BN改性剂, 通过煅烧法和水热法制得碳掺杂六方氮化硼(c-BN)负载MoS₂纳米复合材料(c-BN@MoS₂). 研究了室温条件下c-BN@MoS₂对Cr(Ⅵ)的吸附还原和助催化降解有机污染物的性能. 实验结果表明, c-BN@MoS₂在40 min内对50 mg/L的Cr(Ⅵ)吸附还原去除率高达95%以上, 且以将 Cr(Ⅵ)还原至Cr(Ⅲ)为主, 在pH值为2、 温度为25 ℃条件下去除Cr(Ⅵ)最大容量可达401 mg/g, 显著高于 MoS₂(98 mg/g). 分析显示, c-BN不仅提高了MoS₂的平均孔径, 还可促进MoS₂生成金属特性的1T相, 有利于吸附Cr(Ⅵ)和加快氧化还原过程中的电子转移. 在Fe²⁺/PMS(过一硫酸氢盐)催化体系加入c-BN@MoS₂, 该体系对磺胺甲恶唑的降解性能明显增强, 其反应速率常数提高3倍, 这主要归因于c-BN@MoS₂明显加快了Fe³⁺到Fe²⁺的转变, 导致更多?OH产生, 达到增强降解污染物的目标.     

肿瘤乏氧靶向响应的罗丹明荧光探针及其成像介导手术治疗

基于罗丹明的良好荧光性能, 经化学偶联反应制备并表征了一个偶氮乏氧特异响应的“Off-On”型荧光成像探针(FY-4). 从分子层面证实了其荧光“Off-On”性能和响应机制; 在L02正常细胞及4T1, HeLa和A549肿瘤细胞层面考察了其对受试细胞株的毒性和不同乏氧时间的荧光成像性能; 再利用4T1肿瘤模型, 分别以肿瘤原位注射和尾静脉注射的方式考察了其荧光成像性能, 并探究了其荧光成像介导切除肿瘤性能, 最后还考察了FY-4的生物安全性. 结果表明, FY-4有高的肿瘤乏氧靶向特异“关-开”响应的荧光成像差异显影及荧光成像介导切除肿瘤的潜能, 结合其良好的光物理性能、 生物安全性和明晰的给药时间等特性, 有望为生物医学荧光成像介导肿瘤切除提供新的研究工具.