Cr4+:YAG被动调Q激光器输出特性

采用理论与实验相结合的方法研究了激光二极管阵列泵浦的Cr4+:YAG被动调Q Nd:YAG激光器的输出特性.重点分析了调Q晶体小信号透过率和反射镜的反射率对激光器的输出能量、脉冲宽度的影响.对数值模拟结果进行了实验验证,数值计算与实验结果基本一致.研究结果表明,在特定的激光晶体参数下,Cr4+:YAG被动调Q激光器的输出能量与脉冲宽度由调Q晶体的小信号透过率和输出镜的反射率决定:输出能量随着小信号透过率增加而减小,对应于一个调Q晶体透过率,有一个最佳反射率使输出能量最大;脉冲宽度随着初始透过率与反射率的增大而增大.     

基于同步辐射的快速扫描X射线微束荧光成像方法

在上海光源硬X射线微聚焦光束线站(BL15U1)上, 基于EPICS软件平台, 集成运动控制, 光强探测, 荧光探测等功能, 实现了"飞行"模式 (on-the-fly) X射线扫描微束荧光成像方法. 用"飞行"扫描X射线荧光成像法获得了标准镍网, 以及微量元素Cu, Zn,K, Fe在样品老鼠脾内的分布图像, 结果显示该方法不但在速度上有了极大的提高, 而且获得的元素分布图像具有高质量. 关键词： 快速扫描X射线微束荧光成像 同步辐射 微量元素分布     

混合界面对溶液制备的磷光OLED器件性能的影响

利用混蒸的方法、将空穴阻挡材料2,9-Dimethyl-4,7-diphenyl-1,10-phenanhroline及电子传输材料Tris(8-hydroxy-quinolinato)aluminium混合,在电子传输层及空穴阻挡层之间制备了薄层的混合界面.在相同驱动电压下,采用混合界面的器件比常规器件的电流密度和亮...     

Performance improvement of MEH-PPV:PCBM solar cells using bathocuproine and bathophenanthroline as the buffer layers

In this work, bathocuproine (BCP) and bathophenanthroline (Bphen), commonly used in small-molecule organic solar cells (OSCs), are adopted as the buffer layers to improve the performance of the polymer solar cells (PSCs) based on poly(2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene) (MEH-PPV): [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) bulk heterojunction. By inserting BCP or Bphen between the active layer and the top cathode, all the performance parameters are dramatically improved. The power conversion efficiency is increased by about 70% and 120% with 5-nm BCP and 12-nm Bphen layers, respectively, when compared with that of the devices without any buffer layer. The performance enhancement is attributed to BCP or Bphen (i) increasing the optical field, and hence the absorption in the active layer, (ii) effectively blocking the excitons generated in MEH-PPV from quenching at organic/aluminum (Al) interface due to the large band-gap of BCP or Bphen, which results in a significant reduction in series resistance (Rs), and (iii) preventing damage to the active layer during the metal deposition. Compared with the traditional device using LiF as the buffer layer, the BCP-based devices show a comparable efficiency, while the Bphen-based devices show a much larger efficiency. This is due to the higher electron mobility in Bphen than that in BCP, which facilitates the electron transport and extraction through the buffer layer to the cathode.     

Modelling of multi-bodies in close proximity under water waves——Fluid resonance in narrow gaps

Viscous fluid model and potential flow model with and without artificial damping force(f=-μV,μ the damping coefficient and V the local averaging flow velocity) are employed in this work to investigate the phenomenon of fluid resonance in narrow gaps between multi-bodies in close proximity under water waves.The numerical results are compared with experimental data available in the literature.The comparison demonstrates that both the viscous fluid model and the potential flow model are able to predict the res...     

Aspect-ratio dependent oscillatory thermocapillary convection in the floating half zone

The dependency of the critical Marangoni number on the geometrical aspect ratio of the floating half zone is essential to predict the onset of oscillatory thermocapillary convection.The experimental studies in the microgravity conditions on floating half zones of several centimeters in diameter have predicted that the critical Marangoni number increases with the increasing aspect ratio,and the terrestrial experimental studies have predicted the contradictory conclusion for floating half zones of several mil...     

不同开关频率下电压控制升压变换器中的Hopf分岔分析

由于电压控制升压变换器的传统平均模型中没有包含开关频率,从而无法分析开关频率的大小对电压控制升压变换器中Hopf分岔的影响. 通过建立电压控制升压变换器的含有开关频率的改进平均模型,分析了开关频率对电压控制升压变换器中Hopf分岔的影响,并设计硬件电路,给出电路试验结果. 研究表明:采用电压控制升压变换器的改进平均模型,可以有效地分析不同开关频率对电压控制升压变换器中Hopf分岔的影响; 随着开关频率的减小,电压控制升压变换器更易于发生Hopf分岔. 关键词： 改进平均模型 电压控制升压变换器 开关频率     

双波长高精度红外测温仪

利用双波长红外测温方法,通过黑体红外辐射曲线中双波长等比吸收的原理消除了由于辐射环境中水蒸气等外界吸收原因造成的单波长红外测温仪中的测量误差,实现更稳定的高精度红外测温.该方法绕开了传统红外测温方法中"辐射率修正困难"的问题.同时利用此红外测温仪器改进了金属钨电子逸出功测量实验.     

用于光纤法布里-珀罗传感器腔长互相关解调的光楔的数学模型研究

光楔是实现光纤法布里-珀罗(F-P)传感器互相关解调的重要光学元件.根据互相关解调的原理分析了造成光楔和光纤F-P传感器F-P腔的反射光相位不同的因素,进而建立了光楔的干涉光强的数学模型,在此基础上对具有不同反射率的光楔的干涉光强进行了数值仿真,和相同反射率的光纤F-P传感器F-P腔的干涉光强对比之后建立了光楔的简化数...