单边裂纹聚苯乙烯样品拉伸断裂过程的声发射

本文测定了单边裂纹聚苯乙烯(PS)样品在拉伸加载时的声发射以及声发射事件按幅度、脉宽、计数和位置的分布,实验证实,单边裂纹PS样品拉伸时的声发射来源于裂纹端部银纹区的变形、断裂和扩展,大部分总振铃计数由裂纹亚临界和失稳扩展引起,在重复加载时观察到PS声发射的Kaiser效应。     

Grignard试剂同6，6－二烷基富烯反应的研究

烯丙基卤化镁和环戊二烯基溴化镁同６，６－二烷基富烯分别进行富烯环外双键的加成和还原反应，生成的取代环戊二烯基负离子用（ＣｐＴｉＣｌ＿２）＿２Ｏ（Ｃｐ＝环戊二烯基）或ＴｉＣｌ４配合，合成通式为Ｃｐ（Ｃ＿５Ｈ＿１－ＣＲＲ￣１－ＣＨ＿２ＣＨ＝ＣＨ＿２）ＴｉＣｌ＿２和（Ｃ＿５Ｈ＿４ＣＨＲＲ￣１）＿２ＴｉＣｌ＿２的化合物。对烯丙基卤化镁、环戊二烯基溴化镁同富烯的反应机理进行了探讨。     

葛根素的荧光光谱研究及应用

在 p H8～ 9的水溶液中 ,葛根素有稳定的荧光 ,最佳激发波长与发射波长分别为 2 58nm和 471 nm。当葛根素浓度为 1 .0× 1 0 - 7～ 1 .0× 1 0 - 6mol/ L时 ,其荧光强度与浓度有良好的线性关系。据此以荧光光度法直接测定了葛根、注射液及葛根提取物中葛根素的含量 ,并以 HPL C法对同一样品进行了对照测定 ,取得满意结果     

PREPARATION OF PARTICLE SIZE NARROWLY DISTRIBUTED LOW-DENSITY STYRENE DIVINYLBENZENE COPOLYMER MICROBEADS

In view of the importance of dispersion agent, the amount of the crosslinking monomer andthe diluent in suspension polymerization for the production of particle size narrowly distributedIow-density styrene divinylbenzene copolymer microbeads (LDPS), their actions are preliminarilyinvestigated in this paper. Experimental results indicate that when both the gelatine and polyvinylalcohol (PVA) are used as dispersion agents, the better effect is achieved. DVB is helpful to theformation of the lower density fine particles, the proportion of the DVB/St should be between1:1～1.5:1. Compared with toluene, gasoline is the more effective diluent for the above target.     

Design,synthesis and biological activity of novel herbicides targeted ALS(Ⅻ)--Quantitative structure-activity relationships of herbicidal l,2,4-triazolo[l,5-a]pyrimidine-2-sulfonanilides

The herbicidal activities of a series of 1,2,4-triazolo[1,5-a]pyrimidine-2-sulfonanilides containing various substituents on the benzene ring were quantitatively analyzed with physicochemi-cal parameters by using Hansch-Fujita method.Variations in the activity were parabolically related to electronic parameters with the optimum pKavalue being about 6.93.The hydrophobic factor in addition to the electronic property seemed to have important effect on the activity.     

High performance carbon-supported catalysts for fuel cells via phosphonation

Carbon-supported catalysts were phosphonated using 2-aminoethylphosphonic acid, and the resulting catalysts with largely enhanced proton conductivity performed substantially better than the untreated counterparts in proton-exchange membrane fuel cells.     

不饱和硼烯HClN=B:重排反应的DFT研究

采用量子化学中的密度泛函方法, 在B3LYP/6-311G**水平上研究了不饱和硼烯HClN=B:的重排反应机理。结果表明, 无论是氢原子H迁移还是氯原子Cl迁移都经过1个三元环过渡态,生成直线型产物。但氢原子H迁移是在面内进行, 而氯原子Cl迁移是在面外进行。根据计算结果,详细研究了不饱和硼烯HClN=B:重排反应的热力学及动力学函数, 在此基础上讨论了不饱和硼烯HClN=B:的存在寿命问题。     

聚氨酯分子印章的制备和表征

“软平板印刷”微结构制备技术为微米和亚微米器件的制备提供了一条新的途径 [1] ,已被电子学家和材料学家所应用 ,近年来进入了生物学领域[2 ] .本实验室将这一方法与生物分子电子学相结合 ,提出了用于 DNA芯片在片合成的分子印章法 [3,4 ] .分子印章法的实质是接触压印与组合化学相结合的固相界面反应 .聚二甲氧基硅氧烷 ( PDMS)是一种软印刷的优良材料 [5] ,但是由于其疏水性和较差的机械性能 ,必须对其进行改性才能用来制备 DNA分子印章 [6 ] .　　聚氨酯作为一种功能材料 ,由于分子中交替的软、硬链段及其不同的热动力学性能而形成…     

N,N-二甲基甲酰胺中电沉积制备镁镍储氢合金

采用恒电位沉积法, 选用适宜的添加剂和络合剂, 成功地从N,N-二甲基甲酰胺(DMF)中沉积出致密的黑色Mg-Ni储氢合金膜. 并初步探讨了其共沉积机理. XRD显示沉积层中含有非晶态Mg-Ni相和微晶态Mg相. SEM图及相应能谱图分析表明合金颗粒以团聚状态存在, 合金成分不是很均匀. AAS分析表明沉积合金中Mg的原子摩尔分数达27.3%. LAND电池测试系统测得所镀合金膜的放电比容量最高为172.4 mAh/g.     

Dense Sphene-type Solid Electrolyte Through Rapid Sintering for Solid-state Lithium Metal Battery

The sphene-type solid electrolyte with high ionic conductivity has been designed for solid-state lithium metal battery. However, the practical applications of solid electrolytes are still suffered by the low relative density and long sintering time of tens of hours with large energy consumption. Here, we introduced the spark plasma sintering technology for fabricating the sphene-type Li_1.125Ta_0.875Zr_0.125SiO₅ solid electrolyte. The dense electrolyte pellet with high relative density of ca. 97.4% and ionic conductivity of ca. 1.44×10^-5 S/cm at 30℃ can be obtained by spark plasma sintering process within the extremely short time of only ca. 0.1 h. Also the solid electrolyte provides stable electrochemical window of ca. 6.0 V(vs. Li⁺/Li) and high electrochemical interface stability toward Li metal anode. With the enhanced interfacial contacts between electrodes and electrolyte pellet by the in-situ formed polymer electrolyte, the solid-state lithium metal battery with LiFePO₄ cathode can deliver the initial discharge capacity of ca. 154 mA·h/g at 0.1 C and the reversible capacity of ca. 132 mA·h/g after 70 cycles with high Coulombic efficiency of 99.5% at 55℃. Therefore, this study demonstrates a rapid and energy efficient sintering strategy for fabricating the solid electrolyte with dense structure and high ionic conductivity that can be practically applied in solid-state lithium metal batteries with high energy densities and safeties.