Design of an Internal/External Bicontinuous Conductive Network for High-Performance Asymmetrical Supercapacitors

High-energy density supercapacitors have attracted extensive attention due to their electrode structure design. A synergistic effect related to core–shell structure can improve the energy storage capacity and power density of electrode materials. The Ni-foam (NF) substrate coupled with polypyrrole (PPy) conductive coating can serve as an internal/external bicontinuous conductive network. In this work, the distinctive PPy@FeNi₂S₄@NF and PPy@NiCo₂S₄@NF materials were prepared by a simple two-step hydrothermal synthesis with a subsequent in situ polymerization method. PPy@FeNi₂S₄@NF and PPy@NiCo₂S₄@NF could deliver ultrahigh specific capacitances of 3870.3 and 5771.4 F·g⁻¹ at 1 A·g⁻¹ and marvelous cycling capability performances of 81.39% and 93.02% after 5000 cycles. The asymmetric supercapacitors composed of the prepared materials provided a high-energy density of over 47.2 Wh·kg⁻¹ at 699.9 W·kg⁻¹ power density and 67.11 Wh·kg⁻¹ at 800 W·kg⁻¹ power density. Therefore, the self-assembled core–shell structure can effectively improve the electrochemical performance and will have an effective service in advanced energy-storage devices.     

Imaging of hypochlorous acid in mitochondria using an asymmetric near-infrared fluorescent probe with large Stokes shift

Small-molecule near-infrared (NIR) imaging facilitates deep tissue penetration, low autofluorescence, non-invasive visualization, and a relatively simple operation. As such it has emerged as a popular technique for tracking biological species and events. However, the small Stokes shift of most NIR dyes often results in a low signal-to-noise ratio and self-quenching due to crosstalk between the excitation and emission spectra. With this research, we developed a NIR-based fluorescent probe WD-HOCl for hypochlorous acid (HOCl) detection using the NIR dye TJ730 as the fluorophore, which exhibits a large Stokes shift of 156 nm, with no crosstalk between the excitation and emission spectra. It contains acyl hydrazide as the responsive group and a pyridinium cation as the mitochondria-targeting group. The fluorescence intensity of WD-HOCl was enhanced by 30.1-fold after reacting with HOCl. Imaging studies performed using BV-2 cells indicated that WD-HOCl could be used for endogenous HOCl detection and imaging in living cells exposed to glucose and oxygen deprivation/reperfusion. Finally, we demonstrated that inhibiting the expression of NOX2 reduced the HOCl levels and the severity of oxidative stress during stroke in a mouse model.

Small-molecule near-infrared (NIR) imaging facilitates deep tissue penetration, low autofluorescence, non-invasive visualization, and a relatively simple operation.     

新型全息用光致聚合物的研究

研制了一种新型全息用光致聚合物材料,其成膜树脂为胺固化环氧体系,全息记录组分为光引发自由基聚合体系.用新合成的高效光敏染料DEAMC做光敏剂,通过配方调整,制备了一系列的样片,以457 nm的蓝光为记录光,632.8 nm的红光为探针光,研究了样片的衍射效率、灵敏度、折射率调制度等全息性能.结果表明,通过调整材料的配方组成、各组分的含量及样片的膜厚等因素,可以优化样片的全息性能.对样片的信噪比损失(LSNR)测试结果表明,在全息存储的曝光量范围内对样片曝光引起的图像信噪比损失仅有0.40 dB,说明样片的光学质量高,在全息存储上将具有很好的应用前景.     

大分子阳离子光引发剂聚苯乙烯-碘(鎓)六氟锑酸盐的合成及其感光性能的研究

本文用羟基对甲苯磺酰氧基碘苯与聚苯乙烯进行亲电取代反应,得到大分子阳离子碘鎓盐光引发剂聚苯乙烯碘鎓-六氟锑酸盐(PS-I·SbF₆).用核磁共振仪、傅立叶红外光谱仪、凝胶渗透色谱仪、差示扫描量热仪、紫外分光光度仪对其进行了表征.与小分子碘鎓盐系光引发剂相比,PS-I·SbF₆的紫外最大吸收波长λ_max红移,在240-270 nm范围内有较强的吸收;固化成膜后其相对迁移率较小分子光引发剂有显著下降.初步研究了PS-I·SbF₆在环氧体系中的光固化性能,结果表明该体系有较好的光固化和后固化特性.     

模拟太阳光下稀土Gd掺杂了TiO2纳米晶的光催化性能研究

以甲基橙的光催化降解为探针反应,采用氙灯模拟自然条件下的太阳光,评价了通过酸催化的溶胶-凝胶法制备的稀土Gd掺杂改性TiO2纳米晶的光催化活性及对甲基橙水溶液TOC的去除效果.运用XRD和UV-Vis DRS表征技术考察了Gd掺杂对纳米TiO2的微晶尺寸、晶体结构与光学性能的影响.结果表明,Gd掺杂可以抑制TiO2由锐钛矿相向金红石相的转变,阻碍TiO2晶粒增长,使TiO2的光吸收带边发生蓝移且有利于对可见光的吸收,从而使Gd掺杂TiO2在模拟太阳光下光催化降解甲基橙的能力得到明显提高,但样品对甲基橙水溶液TOC的去除效果要滞后于其对色度的去除.     

基于金纳米棒-壳聚糖复合膜的葡萄糖生物传感器

本文采用金纳米棒-壳聚糖复合膜固定葡萄糖氧化酶构建电流型葡萄糖生物传感器.通过电化学交流阻抗法和循环伏安法对酶膜状态进行了表征,得到了相应的等效电路和动力学参数.实验结果表明,金纳米棒-壳聚糖复合膜可以辅助电子传递,提高电极的电流响应,并使生物传感器的使用温度范围有很大的扩展.此传感器表现出对葡萄糖溶液浓度的优良响应,线性范围在2.78×10^-5mol/L—2.22×10^-3mol/L,响应灵敏度约为7.819μA·cm^-2(mmol/L)^-1,表观米氏常数为10mmol/L.本工作还研究了温度和溶液pH值对电极电流响应的影响.     

10-甲基吖啶苯酚酯衍生物的合成、表征及化学发光特性

吖啶-9-羧酸苯酚酯是一类效率较高的化学发光试剂.其结构一般有两部分组成,吖啶环发光部分和9-羧酸苯酚酯离去基团.本文对离去基团进行修饰,分别在离去基团苯酚部分的2,5或2,6位引入取代基CF₃、NO₂、Br、CH₃,合成了4个新吖啶酯衍生物,并对它们的分子结构进行了表征.4个新化合物和模型化合物(无取代基)比较,均表现出较好的化学发光效率;发光动力学基本符合文献报道规律.而且化学发光法对其水解稳定性考察显示,取代基的电性和位阻是影响稳定性的两大因素.     

Water Status and Predictive Models of Moisture Content during Drying of Soybean Dregs Based on LF-NMR

To explore the drying characteristics of soybean dregs and a nondestructive moisture content test method, in this study, soybean dregs were dried with hot air (80 °C), the moisture content was measured using the drying method, water status was analyzed using low-field nuclear magnetic resonance (LF-NMR) and the moisture content prediction models were built and validated. The results revealed that the moisture contents of the soybean dregs were 0.57 and 0.01 g/g(w.b.), respectively, after drying for 5 and 7 h. The effective moisture diffusivity increased with the decrease in moisture content; it ranged from 5.27 × 10⁻⁹ to 6.96 × 10⁻⁸ m²·s⁻¹. Soybean dregs contained bound water (T₂₁), immobilized water (T₂₂) and free water (T₂₃ and T₂₃’). With the proceeding of drying, all of the relaxation peaks shifted left until a new peak (T₂₃’) appeared; then, the structure of soybean dregs changed, and the relaxation peaks reformed, and the peak shifted left again. The peak area may predict the moisture content of soybean dregs, and the gray values of images predict the moisture contents mainly composed of free water or immobilized water. The results may provide a reference for drying of soybean dregs and a new moisture detection method.     

Tailoring Pore Structure and Morphologies in Covalent Organic Frameworks for Xe/Kr Capture and Separation

As a rising star among porous solid materials, covalent organic frameworks(COFs) with excellent properties including but not limit to facilely controllable structure, high porosity, and multi-chemical functionality represent significant potential for efficient ¹²⁷Xe/⁸⁵Kr capture and separation. In this study, through tuning the length of the organic ligands, two-dimensional(2D) COF mate-rials with identical connection group but different pore properties, denoted as ATFG-COF and TpPa-COF with AA-stacking model and TpBD-COF with AB-stacking model were synthesized and tested for Kr and Xe adsorption for the first time. Adsorption measurements indicate that the narrower pore apertures and higher porosity are conducive for COF materials to capture Xe and Kr. Furthermore, the Henry's constant, isosteric heat of adsorption(Q_st), and ideal adsorbed solution theory(IAST) selectivity of ATFG-COF, the pore size of which is closest to the kinetic diameter of the Xe atom(0.41 nm) among 2D COF materials, were carried out based on the single component sorption isotherms. The results illustrate that the high isosteric heat values of Xe/Kr adsorption on ATFG-COF are 25 and 16 kJ/mol at room temperature, respectively. Henry's law predicts that the selectivity factor of Xe to Kr is 6.07, consistent with the adsorption selectivity(ca. 6) calculated based on the IAST.     

利用激光诱导击穿光谱原位在线检测褐煤及煤烟

褐煤是我国现阶段的主要用煤,但因为其较低的煤化程度,使用时会产生污染环境的二氧化碳和黑灰,而且烟尘中含有的金属离子会危害人体健康,所以开展对褐煤烟尘的研究非常有意义.而激光诱导击穿光谱技术(L IBS)具有快速、多元素同时分析的特点,适合用于煤烟的原位在线探测.实验制备了含铅浓度不同的三种褐煤样本(O,H,L),其中O...