ICP-AES法测定茶叶中As,Cd,Ni,Pb等元素的含量

目的对样品前处理、酸度及茶叶中共存元素干扰的影响等因素进行探讨,方法用微波消解前处理样品,ICP-AES法同时测定茶叶中铅(Pb)、砷(As)、镉(Cd)、镍(Ni)等元素含量。结果该法的回收率在84.5%～115%之间,精密度RSD均小于9%,结论该法能满足茶叶测定要求。     

野生中草药木贼中微量元素的测定

目的测定中草药木贼中微量元素的含量。方法用湿法消化及于法灰化两种方法处理样品并进行了比较,用火焰原子吸收法测定了中草药木贼中7种微量元素的含量。结果测定结果湿法的RSD在0．5％～3．0％,干法的RSD在0．5％-7．5％之间。结论湿法处理金属离子损失小,测量精密度更好。木贼中微量元素的含量由高到低顺序为：Mg,Fe,Mn,Zn,Cu,Ph,Ni。     

自动化势能面搜索方法新进展

本文简要介绍了势能面搜索的两个主要问题,即过渡态搜索和全局势能面搜索,并针对这两个问题介绍了本研究组最近发展的3种方法,即限制最小化双子算法、偏置势函数辅助限制性最小化双子算法以及势能面随机行走方法．这3种方法均只需计算一阶梯度,能够用于快速自动化的搜索过渡态以及势能面．通过几个典型例子分别说明了3种方法的特点及优势．     

量子态选择的分子离子解离动力学：阈值光电子-光离子符合成像技术的应用

阈值光电子一光离子符合速度成像技术通过对光电子和符合的光离子同时进行速度聚焦控制,大幅提高了电子和离子的收集效率和离子平动能分辨率,成为开展气相分子光电离和光电离．解离动力学研究的有效工具．利用该技术,我们精确地测量了分子的电离能、离子出现势等重要参数,并且开展了若干具有量子态或内能选择的离子解离动力学研究,描绘了相关势能面存在浅势阱等重要动力学特征,讨论了不同振动态和电子态的激发对解离机理和产物通道的重要影响．     

Bismuth Trichloride–Catalyzed C‐Alkylation of Pyrroles with Electron‐Deficient Olefins

The BiCl₃‐catalyzed reaction of pyrroles with electron‐deficient olefins generated the corresponding Michael adducts in high yields.     

Organic Reactions in Ionic Liquids: Ionic Liquid Ethylammonium Nitrate–Promoted Knoevenagel Condensation of Meldrum's Acid With Aromatic Aldehydes

The Knoevenagel condensation of Meldrum's acid with aromatic aldehydes proceeded efficiently in a reusable ionic liquid, ethylammonium nitrate, at room temperature in the absence of any catalyst with high yields.     

Non-enzymatic hydrogen peroxide sensor based on a gold electrode modified with granular cuprous oxide nanowires

Granular nanowires with a diameter of about 60 nm were fabricated from cuprous oxide (Cu₂O) by an electrochemical method using anodic aluminium oxide as the template. A non-enzymatic sensor for hydrogen peroxide (H₂O₂) was then developed on the basis of a gold electrode modified with Cu₂O nanowires and Nafion. The resulting sensor enables the determination of H₂O₂ with a sensitivity of 745 μA?mM^?1?cm^?2, over a wide linear range (0.25 μM to 5.0 mM), and with a low detection limit (0.12 μM). The results demonstrate that the use of such granular nanowires provides a promising tool for the design of non-enzymatic chemical sensors.

SiO2-NHC-CuI–Catalyzed N-Arylation of Imidazoles with Arylboronic Acids Under Base-Free Reaction Conditions

N-Arylation of imidazoles with arylboronic acids was efficiently carried out in the presence of a catalytic amount of SiO₂-NHC-Cu^I in methanol at room temperature under base-free reaction conditions. The reactions of a variety of arylboronic acids with imidazoles generated the corresponding products N-arylimidazoles in good to excellent yields. In addition, SiO₂-NHC-Cu^I could be recovered and recycled for six consecutive trials without significant loss of its reactivity.     

Laboratory Studies of Depressurization with a High Concentration of Surfactant in Low-Permeability Reservoirs

To solve the problem of high pressure of water injection in low permeability reservoirs, a high concentration of surfactant system was developed in this article. With the solubilization of oil in aqueous surfactant solution as a criterion, a formula was screened from anionic and nonionic-anionic surfactants, and the optimal depressurized system was obtained as follows, 13.3% surfactant HEX +2.23% n-propanol +4.47% n-butanol, the solubilization capability being up to 0.66 g/g. This system had good salt tolerance, and it exhibited water external microemulsion in the range of of 1 to 200 g/L NaCl. Core flooding results show that this high concentration of surfactant system formed water external microemulsion with the residual oil in the core, reducing the displacement pressure over 35%. Meanwhile, the effects of concentration and injection volume on depressurization were also investigated. It is indicated that a good depressurization effect was achieved after injecting 1 pore volume of the system with the salt concentration of 100 g/L.