CTAB与SDBS对碳酸锶粒子生长形态调控及机理研究

以表面活性剂CTAB和SDBS为化学添加剂,采用化学共沉淀法对碳酸锶晶体的生长形态进行调控,成功地制备出了实心的树枝状和花瓣为空心的花状碳酸锶粉体,并用X射线衍射(XRD)、扫描电子显微镜(SEM)和傅里叶变换红外光谱(FT-IR)等分析手段对样品进行了表征;最后重点对化学添加剂可能产生的影响机理进行了初步的探讨.结果表明,CTAB和SDBS在晶体生长的过程中能起到显著的影响作用,两者对粒子分散性能的作用效果相反,而且后者对晶体(013)和(213)晶面表面能降低的贡献明显大于前者.     

工作气压对磁控溅射ITO薄膜性能的影响

工作气压在ITO薄膜的制备过程中是一个重要的工艺参数,直接决定着薄膜的性能.本文利用射频磁控溅射方法,采用氧化铟锡陶瓷靶材,在衬底温度为175℃,工作气压范围为0.45～1.0 Pa条件下,制备了氧化铟锡透明导电薄膜.研究了工作气压对其微观结构、表面形貌和光电特性的影响.在衬底温度为175℃、纯氩气中制备的氧化铟锡薄膜电阻率为3.04 ×10-4 Ω·cm、可见光波段(400～800 nm)透过率为91.9;,适合用作异质结太阳电池的前电极和减反射膜.     

用化学溶液方法在Ni-5at%W基底上制备La2Zr2O7过渡层的研究

La2Zr2O7(LZO)过渡层以其独特的物理化学性质越来越受到人们的关注。本文以乙酰丙酮镧和乙酰丙酮锆为前驱盐,丙酸为溶剂配置前驱液,用化学溶液方法(CSD)在具有立方织构的Ni-5at%W基底上制备了LZO过渡层薄膜。研究了前驱液成分、性质以及退火温度对LZO成相以及取向的影响。用常规XRD和X射线四环衍射仪分析了LZO薄膜的相成分和织构。结果显示,在1050℃下退火可以获得强立方织构的LZO薄膜,其中(222)峰的Phi扫描半高宽值为8.95°;(400)峰的Chi扫描半高宽值为6.8°。用高分辨扫描电子显微镜(FE-SEM)观察到LZO薄膜表面均匀致密,没有裂纹和空洞。     

信息时代的铌酸锂晶体:进展与展望

铌酸锂晶体具有非线性效应、电光效应、声光效应、光折变效应、压电效应与热释电效应等多种物理特性,在表面声波器件、光电器件、声光器件等方面获得广泛的应用.经历了六十多年的发展,铌酸锂晶体历久弥新,随着材料特性的不断开发,新功能、新器件、新应用层出不穷,尤其是铌酸锂单晶薄膜在薄膜滤波器、集成光电器件等领域的性能具有明显优势,...     

Tailoring Pore Structure and Morphologies in Covalent Organic Frameworks for Xe/Kr Capture and Separation

As a rising star among porous solid materials, covalent organic frameworks(COFs) with excellent properties including but not limit to facilely controllable structure, high porosity, and multi-chemical functionality represent significant potential for efficient ¹²⁷Xe/⁸⁵Kr capture and separation. In this study, through tuning the length of the organic ligands, two-dimensional(2D) COF mate-rials with identical connection group but different pore properties, denoted as ATFG-COF and TpPa-COF with AA-stacking model and TpBD-COF with AB-stacking model were synthesized and tested for Kr and Xe adsorption for the first time. Adsorption measurements indicate that the narrower pore apertures and higher porosity are conducive for COF materials to capture Xe and Kr. Furthermore, the Henry's constant, isosteric heat of adsorption(Q_st), and ideal adsorbed solution theory(IAST) selectivity of ATFG-COF, the pore size of which is closest to the kinetic diameter of the Xe atom(0.41 nm) among 2D COF materials, were carried out based on the single component sorption isotherms. The results illustrate that the high isosteric heat values of Xe/Kr adsorption on ATFG-COF are 25 and 16 kJ/mol at room temperature, respectively. Henry's law predicts that the selectivity factor of Xe to Kr is 6.07, consistent with the adsorption selectivity(ca. 6) calculated based on the IAST.     

Conversion of Methane to Ethylene with BaCe_(0.9)Y_(0.1)Co_xO_(3-δ) Hydrogen Permeation Membrane

Dehydrogenation coupling of methane (DCM),which can be effectively used to produce low carbon alkenes,has the advantages of rich raw materials,simple reaction device,low energy consumption,etc.Herein,we report a series of Co doped perovskite porous-dense Ba Ce_(0.9)Y_(0.1)Co_xO_(3-δ)(BCYCx) membrane for DCM.After treatment in a reduced atmosphere,a large number of Co nanoparticles will exsolute on the surface of BCY.The metal-oxide interface is helpful to activate the C–H bonds,inhibit the carbon deposition,and so on.The XRD,SEM and XPS prove that Co nanoparticles homogeneously distributed on the BCYCx porous layers,which will create a large quantity of catalytic active sites.At 1100℃,the highest concentration of C_2 product was 5.66%(5.25%ethane+0.41%ethylene)in output gas when methane conversion reaches a maximum value of 24.8%,and the C_2 selectivity gets to 45.6%.We further demonstrate the catalytic performance of high-temperature DCM without obvious decrease after running for 30hours.     

嵌段共聚物自组装的研究进展

嵌段共聚物自组装在光学、电子、信息、化学及生物领域有着广泛的应用前景.本文从实验观测、理论研究和计算机模拟三个方面概述了嵌段共聚物自组装领域的研究进展.在实验观测方面,着重介绍了嵌段共聚物在体相及膜中的自组装及外场调控作用方面的研究进展;理论方面则分别介绍了强分相理论、弱分相理论、自洽场理论、动态密度泛函方法和元胞动力学等在嵌段共聚物自组装领域的应用;计算机模拟方面就 Monte Carlo 模拟、耗散粒子动力学等方法在该领域的应用作了详细的阐述.     

Microwave Pyrolysis and Electrochemical Supercapacitor of S-doped g-C_3N_4 Nanoparticles

In this study, S-doped g-C_3N_4 nanoparticles were successfully prepared by one-step solid-state microwave synthesis. The detailed characterizations through XRD, FT-IR, SEM and XPS were studied. In addition, the electrochemical properties as supercapacitor of the sample were tested by cyclic voltammetry(CV), galvanostatic charge-discharge(GCD) and electrochemical impedance spectroscopy(EIS) techniques. The results showed a high specific capacitance of 691 F/g at current density of 4 A/g in 2 M KOH + 0.15 M K_3[Fe(CN)_6] electrolyte. This study shows that the microwave synthesis is a promising way to design carbon-based electrodes for supercapacitor.     

油品对DMCC甲醛排放的比较研究

为了研究甲醇燃料发动机尾气中甲醛的排放特征,在一台经过改装的组合燃烧发动机上,采用标准测试柴油(TF)和普通市场柴油(MF)进行了实验,比较了燃用不同油料时的甲醛排放特征.实验结果表明;在相同甲醇掺烧比时,两种油料均是在低负荷时甲醛排放最高,在中负荷时最低,在高负荷时甲醛排放居中,三种负荷下MF甲醛排放均比TF高;此外,实验还对比了相同负荷、不同甲醇掺烧比时的甲醛排放,均表现出MF的甲醛排放比TF高,在高负荷下甚至达到2.5倍;实验还表明单纯的依靠氧化催化转化器不能有效降低甲醛排放.     

X射线荧光光谱分析中的粉末压片制样法

本文是一篇关于XRF光谱分析中粉末压片制样法的综述。根据70多篇文献和一些常见的资料，作者从样品制备、方法应用、理论校正等三个方面介绍了粉末压片制样法的现状和进展。