基于椭圆型方程的扭叶片造型方法的研究

本文以偏微分方程造型为基础,提出了一种基于椭圆型方程的扭叶片三维型面直接设计方法,详细推导了叶型曲面函数,给出了型面方程的求解及其前后缘修正。该方法具有设计叶型曲面自然光顺,设计参数少且各参数具有明显的几何意义,叶型曲面调整方便,利于采用非数值优化算法对其进行气动优化等优点。文中给出了设计实例,并通过数值实验分析了所设计叶片型面的流动特性。分析结果表明设计叶片具有良好的气动性能,同时也证明了本文提出的基于椭圆型方程的扭叶片三维型面设计方法的可靠性和实用性。     

CFD在燃煤细粒子凝聚过程中的应用

燃煤产生的细粒子富集了大量的有毒痕量元素,对大气环境和人类健康造成严重危害。本文针对燃煤细粒子的形成过程,在计算流体力学(CFD)的基础上,结合气溶胶动力学理论,模拟了烟气中细粒子在圆柱形流场中由于碰撞而凝聚的过程,并通过计算结果分析细粒子颗粒特征参量(速度、质量、直径和颗粒数目)随流场的变化趋势,为深入研究燃煤细粒子的形成演化机理提供理论基础。     

Resistivity－temperature characteristics of sol gel YBa2Cu3Oy samples synthesized in flowing oxygen atmosphere

The relationship of resistivity versus synthesizing temperature of sol gel YBa_2Cu_3O_y samples was studied when prepared under flowing oxygen conditions. A set of high-temperature ρ－T curves was obtained for the whole process. After the sample finished the test measuring, its resistivity was ρ_{300}=9.83×10^{-3 }Ω·cm at room temperature. The ρ－T curve also showed that the orthorhombic－tetragonal phase transformation of sol-gel YBa_2Cu_3O_y sample occurred at 581℃ for the sample in the rising temperature process, but at 613℃ in the cooling process, lower than that of the samples made by using the conventional powder metallurgy methods.     

双氯芬酸钠与牛血清白蛋白结合反应的特征

在模拟人体生理条件下,采用荧光光谱和紫外 可见吸收光谱法研究了双氯芬酸钠与牛血清白蛋白的结合反应.实验结果显示,双氯芬酸钠对牛血清白蛋白有较强的荧光猝灭作用,该猝灭过程主要为静态荧光猝灭过程;二者结合常数KLB=2.167×105mol·L-1;二者的结合位置距212位色氨酸2.13nm;同时,由结合反应的热力学参数得出二者作用力主要是氢键或VanderWall's力.     

试探方程法及其在非线性发展方程中的应用

提出了一种比较系统的求解非线性发展方程精确解的新方法, 即试探方程法. 以一个带5阶 导数项的非线性发展方程为例, 利用试探方程法化成初等积分形式，再利用三阶多项式的完 全判别系统求解，由此求得的精确解包括有理函数型解, 孤波解, 三角函数型周期解, 多项 式型Jacobi椭圆函数周期解和分式型Jacobi椭圆函数周期解 关键词： 试探方程法 非线性发展方程 孤波解 Jacobi椭圆函数 周期解     

张量对称类上诱导线性算子的数值半径

设V是一个n维线性空间,V_x~m(G)为V上的张量对称类.A为V的线性算子T的矩阵,K(A)为V_x~m(G)上的诱导线性算子K(T)的矩阵.本文从K(A)的数值半径Υ(K(A))和可分数值半径Υ_x(K(A))定义出发,研究了Υ(K(A))、Υ_x(K(A))与范数||A||_p(1≤p≤2)、广义矩阵函数d_x~G(A)的关系,得到了它们之间的两个不等式.     

二元液态金属Cu-Ni和Ag-Cu凝固过程的分子动力学模拟研究

用Quantum Sutton-Chen多体势对Ag6Cu4和CuNi液态金属凝固过程进行了分子动力学模拟研究.在冷却速率2×1012到2×1014K/s范围内,CuNi总是形成fcc晶体结构,而Ag6Cu4总是形成非晶态结构.考虑到CuNi及AgCu中原子半径之比分别为1.025和1.13,那么模拟结果证实了原子的尺寸差别是非晶态合金形成的一个主要影响因素.此外采用键对及原子多面体类型指数法对凝固过程中微观结构组态变化的分析,不但能说明二十面体结构在非晶态合金形成和稳定性中所起的关键作用,又有助于对液态金属的凝固过程、非晶态结构特征的深入理解.     

WEIGHTED APPROXIMATION ON SZASZ—TYPE OPERATORS

In this paper, we use weighted modules ω(?)(f,t)w to study the pointwise approximation on Szasz-type operators, and obtain the direct and converse theorem, as well as characterizations of the pointwise approximation of Jacobi-weighted Szasz-type operators.     

Multi-layer thin films/substrate system subjected to non-uniform misfit strains

Current methodologies used for the inference of thin film stress through curvature measurement are strictly restricted to stress and curvature states that are assumed to remain uniform over the entire film/substrate system. These methodologies have recently been extended to a single layer of thin film deposited on a substrate subjected to the non-uniform misfit strain in the thin film. Such methodologies are further extended to multi-layer thin films deposited on a substrate in the present study. Each thin film may have its own non-uniform misfit strain. We derive relations between the stresses in each thin film and the change of system curvatures due to the deposition of each thin film. The interface shear stresses between the adjacent films and between the thin film and the substrate are also obtained from the system curvatures. This provides the basis for the experimental determination of thin film stresses in multi-layer thin films on a substrate.