弱闭T(N)-模的预零化子的等距映射

本文刻划了弱闭T(N)-模的预零化子间的等距映射.设u,W分别为由左连续序同态N→~N和N→~N所确定的弱闭T(N)-模, u(?),W(?)分别为u,W的预零化子,Φ为由u(?)到W(?)上的线性等距映射.若(0)*=(0)#=(0),dim(0)+≠1且min{dim(H(?)~H),dim(He(?)^H)}≥2,则存在酉算子Ui,Vi(i=1,2),使得Φ(A)=U1AV*1或Φ(A)=U2A*V2*.     

von Neumann代数中套子代数上的Lie导子

本文对因子von Neumann代数中套子代数上的线性映射L:alg_Mβ→M满足L(AB—BA)=L(A)B-BL(A)+AL(B)-L(B)A( A,B∈alg_Mβ)进行了刻划,证明了存在线性函数h:alg_Mβ→C;且对任意A,B∈alg_Mβ,有h(AB—BA)=0和算子T∈M,使得对任意X∈alg_Mβ,都有L(X)=XT-TX+h(X)I.     

Field emission from nano-patterned amorphous carbon

Electron emission from nano-patterned amorphous carbon is realized in this paper. The patterned carbon consists of islands with size of tens of nanometers, and is formed by etching uniform carbon film in oxygen plasma using a bismuth island-like film as the mask. Uniform and stable electron emission is reproducibly obtained, and the emission efficiency is above 2% at an anode voltage of 3 kV. Small carbon particles between large islands are supposed to be necessary for stable electron emission.     

纤维素热解过程中活性纤维素的生成研究

热重分析发现活性纤维素的生成始于530 K左右,对应于失重图上的肩部及SDTA曲线中强烈的放热峰.在辐射加热闪速热裂解试验台上获取了一种可溶于水、高温下易分解、室温下呈固态且稳定存在的黄色中间产物.扫描电镜图片证明在热裂解初期纤维素经历了一个熔化和相互粘结的状态,产物的红外谱图证实了大量的羰基和羧基官能团的生成.高效液相色谱分析证明其主要成分是一系列聚合度不同的低聚糖,推断该低聚糖即为活性纤维素.     

大气激光通信的实验测量

设计了大气激光通信信道测量系统，利用此系统在不同气象条件下进行了近地视距实验测量并采集了不同天气条件下的实验数据，详细分析讨论了所得实验数据并进行了误差分析．同时实验中获得了大量数据，为进一步完善大气激光信道模型提供了有力的依据．     

Synthesis of Nanoscale Bimetallic Particles in Polyelectrolyte Membrane Matrix for Reductive Transformation of Halogenated Organic Compounds

Nanosized Fe/Ni and Fe/Pd particles were synthesized in the polyacrylic acid (PAA)/polyether sulfone (PES) composite membrane matrix for reductive transformation of halogenated organic compounds (HOCs). The advantages of using membrane to immobilize nanoparticles are the reduction of particles loss, prevention of particles agglomeration, and potential application of convective flow. Cross-linked PAA/PES composite membranes containing metal ions as particles precursor were prepared by heat treatment with ethylene glycol (EG) as a cross-linking agent. Nanoscale metal particles were formed and immobilized inside the membrane matrix after reduction with sodium borohydride. Membrane morphology and structure were observed by scanning electron microscopy (SEM). Particle size and distribution were characterized by SEM and transmission electron microscopy (TEM). Energy dispersive X-ray spectroscopy (EDS) was used to obtain the qualitative and quantitative element information of particles. A specimen-drift-free EDS line profile and EDS mapping system was performed in a scanning transmission electron microscopy (STEM) to determine the two-dimensional element distribution of iron and nickel in the nano domain. In the dechlorination study with trichloroethylene (TCE) as a representative HOCs, rapid and complete destruction of TCE was achieved by using nanosized bimetallic Fe/Ni or Fe/Pd in PAA/PES composite membranes. Typically more than 95% of 10 mg/l TCE was reduced within 1 h. Ethane was found in the headspace as the main product.     

缓变下垫面对浅水方程的动力学订正

讨论了当下垫面随时间缓慢变化时浅水方程的形式. 从控制大气运动的连续性方程和动量方程出发, 将下垫面的缓慢变化作为一个小量叠加到固有下垫面函数上, 利用大气的上下边界条件, 得到改进的浅水方程. 在改进的浅水方程中, 由缓变局部水平体积散度, 订正了局部水平体积散度和流体局部厚度变化之间的平衡, 在此基础上得到包含下垫面缓变的涡度方程.     

Ni熔体凝固过程中临界晶核和亚临界晶核的分子动力学模拟

本文用分子动力学模拟研究了Ni熔体以不同冷速凝固后微观结构的演变规律, 并通过理论计算确定出了Ni熔体凝固后获得理想非晶的临界条件. 模拟结果发现冷速小于10¹¹ K/s时, Ni 熔体凝固后形成晶态组织; 冷速在10¹¹ K/s到10^14.5 K/s之间时, Ni熔体凝固后形成由晶态结构与非晶态结构组成的混合组织. 冷速小于10¹⁰ K/s, Ni 熔体凝固后形成的晶态组织具有fcc结构; 冷速在10¹⁰ K/s到10^14.5 K/s之间时, Ni熔体凝固后组织中的晶态由fcc和hcp结构层状镶嵌排列构成. 通过分析模拟结果和计算结果, 确定出了Ni熔体凝固后形成理想非晶的临界冷速为10^14.5 K/s. 并发现Ni熔体中临界晶核(冷速等于10^14.5 K/s)和亚临界晶核(冷速大于10^14.5 K/s) 均由fcc和hcp组成层状偏聚结构, 这表明Ni熔体中生长的晶体、临界晶核和晶胚的结构是相同的. 关键词： 分子动力学模拟 晶体团簇 临界冷速 结构     

舰载光电指向器多轴系耦合精度分析

光电指向器的轴系精度直接影响到光电系统的整体性能指标。分析了光电指向器轴系之间精度影响关系,根据对方位轴系、俯仰轴系和视轴轴系的各项误差源分析计算出各轴系误差值,结合在安装过程中方位轴系误差与俯仰轴系误差建立数学模型,寻找方位角和俯仰角与方位轴系、俯仰轴系、视轴轴系的误差之间的耦合关系,并将三个轴系误差进行耦合后建立数学模型分析。该分析方法和结果为光电指向器的多轴系结构耦合误差设计提供了理论及工程依据。     

原位成形光学微透镜的聚光性能研究

为解决荧光谱微检测系统中光学微透镜制作的困难,提出一种原位成形微透镜的制作方法,研究该微透镜的聚光性能,利用传统几何光学原理,分别推导出激发微透镜与检测微透镜的光线追迹方程,用该方程计算了2种微透镜的照射点分布几率,画出相应的分布曲线图,讨论了不同形状参数的微透镜对聚光性能的影响。研究结果表明,通过在光学胶中适当掺杂及打磨基底玻璃,可减小接触角,加大微透镜的形状参数,既能坚固透镜与基底间的粘接强度,又能提高微透镜的聚光本领。制作了使用原位成形光学微透镜的荧光谱微检测器,对生物荧光试剂进行了测试。实验结果表明,使用原位成形光学微透镜进行聚光,可使生物荧光谱强度提高4倍以上,通过在光学胶中掺杂以及打磨玻璃的办法,可以提高透镜的聚光本领约1.2倍。