Microstructure and Optical Properties of AgxO Prepared by Direct-Current Magnetron-Sputtering Method

Two series of AgxO films are prepared on glass substrates by dc magnetron-sputtering method at room temperature and 90℃ under different oxygen to argon gas ratio （OAR） conditions. The mierostrueture is investigated by XRD and SEM in order to obtain the information on the component evolution of AgO＋Ag2O to Ag2O. Its optical properties are investigated by reflectance and absorption spectroscopy to extract the information on metallic and dielectric behaviour evolution of Ag2O, AgO and silver particles and the interband transition. The results indicate that the AgxO film prepared at room temperature is mainly made up of AgO and Ag2 O clusters while Ag2O is the primary component of AgxO prepared at 90℃. The AgxO film mainly consisting of the primary component shows indirect interband transition structure occurring at 2.89eV. Combination of increasing OAR and substrate temperature is an effective method to lower the threshold of thermal decomposition temperature of AgxO and to deal with the bottleneck of short-wavelength optical and magneto-optieM storage.     

Experimental Characterization of Sub-picosecond Electron Bunch Length with Coherent Diffraction Radiation

Diffraction radiation is one of the most promising candidates for electron beam diagnostics for the International Linear Collider, x-ray free electron lasers and energy recovery linac due to its non-intercepting characteristics. We report the non-intercepting measurement of sub-ps electron bunch length with coherent diffraction radiation. The bunch length is measured with a Martin--Puplett interferometer and the detailed longitudinal bunch shape is reconstructed with the Kramers--Kronig relation. The rms bunch length is found to be about 0.73ps, which confirms a successful commissioning of the bunch compressor and the interferometer.     

Self-Injection and Acceleration of Monoenergetic Electron Beams from Laser Wakefield Accelerators in a Highly Relativistic Regime

Self-injection and acceleration of monoenergetic electron beams from laser wakefield accelerators are first investigated in the highly relativistic regime, using 100 TW class, 27 fs laser pulses. Quasi-monoenergetic multi- bunched beams with energies as high as multi-hundredMeV are observed with simultaneous measurements of side-scattering emissions that indicate the formation of self-channelfing and self-injection of electrons into a plasma wake, referred to as a ＇bubble＇. The three-dimensional particle-in-cell simulations confirmed multiple self-injection of electron bunches into the bubble and their beam acceleration with gradient of 1.5 GeV/cm.     

Effect of Aspect Ratio Distribution on Localized Surface Plasmon Resonance Extinction Spectrum of Gold Nanorods

Gold nanorods with different aspect ratios are prepared in micells using a seeded growth method. Their extinction spectra are observed with an UV-visible spectrophotometer and analysed theoretically. It is known that there are two plasmon resonance peaks for gold nanorod corresponding to transverse and longitudinal plasmon resonance respectively. Moreover, the longitudinal plasmon resonance peak shifts to long wavelength when we increase the aspect ratio determined from TEM. Especially, we model the extinction spectrum using Gans' theory and compare it with our experimental result. Considering the aspect radios distribution of gold nanorods, it is found that longitudinal plasmon resonance peak will be wider than the nanorods with single aspect ratio, which is consistent with our experimental result. In addition, the effect of dielectric constant of surrounding medium is considered.     

Photonic Crystal Fibre SERS Sensors Based on Silver Nanoparticle Colloid

A photonic crystal fibre （PCF） surface enhanced Raman scattering （SERS） sensor is developed based on silver nanoparticle colloid. Analyte solution and silver nanoparticles are injected into the air holes of PCF by a simple modified syringe to overcome mass-transport constraints, allowing more silver nanoparticles involved in SERS activity. This sensor offers significant benefit over the conventional SERS sensor with high flexibility, easy manufacture. We demonstrate the detection of 4-mercaptobenzoic acid （4-MBA ） molecules with the injecting way and the common dipping measurement. The injecting way shows obviously better results than the dipping one. Theoretical analysis indicates that this PCF SERS substrate offers enhancement of about 7 orders of magnitude in SERS active area.     

基于毛竹叶片理化参数的刚竹毒蛾危害检测研究

虫害检测算法研究是开展虫害快速、准确监测,制定精准森防检疫措施的重要基础。以毛竹叶片为研究尺度,基于刚竹毒蛾危害下的寄主外部形态与内部生理现象总结,选择并实测叶损量LL、相对叶绿素含量RCC、相对含水量RWC、原始光谱的733.66~898.56 nm值(ρ_{733.66~898.56})、一阶微分光谱的562.95~585.25 nm值(ρ′_{562.95~585.25})与706.18~725.41 nm值(ρ′_{706.18~725.41})等理化参数,随机划分实验组(63组)和验证组(37组)并设计5次重复实验;分别运用Fisher判别分析、BP神经网络、随机森林等三种方法建立刚竹毒蛾危害等级的检测模型,从检测精度、Kappa系数及R2等指标对模型的检测效果予以分析和比较。结果显示,Fisher判别分析、BP神经网络、随机森林的检测精度分别为69.19%,65.41%,83.78%,Kappa系数分别为0.576 9,0.532 4和0.778 8,R2分别为0.722 2,0.582 6和0.870 9,总体而言,三种方法均具备刚竹毒蛾危害的检测能力,随机森林的检测效果最优,Fisher判别分析次之,再次为BP神经网络;从分等级来看,随机森林的检测精度亦优于Fisher判别分析与BP神经网络,但3种方法对中度危害等级的检测精度均有所不足。该成果可为刚竹毒蛾危害及其他病虫害检测算法的选择提供参考,并为进一步建立冠层、遥感影像像元等尺度的虫害检测模型奠定基础。     

桉树杂交种与其亲本的近红外光谱判别

研究桉树控制授粉后目标性状的基因作用方式是探索其基因重组规律的重要内容。常规的数量统计分析精度往往不高,而DNA分析的专业要求高,且费时费力。该研究利用近红外光谱(NIRs)研究不同基因型桉树杂交种、亲本及杂交种与亲本间近红外光谱信息的关系,探索NIRs用于桉树杂交种与其亲本判别的可行性和准确性。以控制授粉的桉树亲本及其杂交F1代材料为对象,每种基因型从各自田间试验分别选取10个单株,采集树冠中上部新鲜健康叶片。用手持式近红外仪Phazir Rx(1624)采集桉树杂交种与其亲本叶片的NIRs信息。每单株选10片完全生理成熟的健康叶片,避开叶脉扫描其正面光谱5次,以50条NIRs信息的均值代表单个叶片的NIRs信息,最终每个基因型获得10条NIRs信息。对原始NIRs采用二阶多项式S.G一阶导数预处理。预处理后的NIRs用于多元统计分析,首先对桉树杂交亲本和子代样本进行主成分分析(PCA),直观展示不同基因型的分类情况。然后运用簇类独立软模式(SIMCA)和偏最小二乘判别分析(PLS-DA)两种有监督的判别模式验证NIRs用于桉树杂交种与其亲本树种的分类判别效果。PCA结果显示,不同的亲本间、杂交种间及杂交种与亲本间样本的主因子得分可以清晰地将各基因型分开。SIMCA模式判别分析中,桉树杂交种样本到亲本PCA模型的样本距离显示,待判别样本能够形成单独的聚类,且能直观反映两者的遗传相似。PLS-DA判别结果显示,桉树杂交亲本的PLS模型能通过预测其杂交子代的响应变量将其与亲本准确分开。结果表明,桉树叶片的NIRs信息可以准确地反映桉树杂交子代遗传信息的传递规律,NIRs判别模型可以准确地将各种基因型予以区分。因此,NIRs信息不仅可用于桉树杂交种和纯种的定性判别,还可以分析桉树基因重组过程中加性遗传效应的大小,从而为桉树遗传基础分析及其育种改良研究提供理论支撑。     

半导体的CO2激光退火和合金化

本文主要研究连续CO₂激光对半导体的照射效应。实验结果与理论分析说明,用连续CO₂激光照射可将半导体样片加热到所需的温度。与其它短波长的激光不同,波长为10.6μm的连续CO₂激光照射半导体有如下特点:CO₂激光是借助于自由载流子吸收与半导体耦合;样片在深度方向被均匀加热;激光背面照射可以增强退火效果。连续CO₂激光照射可以固相外延再生长的方式使As离子注入Si的损伤层退火恢复。在再生长的过程中注入的As离子进入替位,电激活率很高,而且不发生杂质再分布。将连续CO₂激光背面照射成功地应用于GaAsFET制备欧姆接触,既可避免激光正面照射对器件结构的破坏,又能得到比热退火为好的电学性能。 关键词：     

氟锆酸盐玻璃光纤的研制

本文介绍聚全氟乙丙烯包皮的氟锆酸盐(ZrF_4-BaF_2-LaF_3-AlF_3-NaF)玻璃光纤的制备方法.研究了各种工艺因素对氟锆酸盐玻璃和光纤散射损耗的影响.结果表明,选择适当的熔化温度和均化时间,玻璃熔化和光纤拉制时环境中低的水含量是制得的损耗氟锆酸盐玻璃光纤的关键;配合料中引入适量NH_4HF_2,选用温度结构合理的拉丝炉及拉丝工艺也有助于降低光纤的损耗.在此工作基础上,获得了波长2.32μm处损耗为0.24dB/m的氟锆酸盐玻璃光纤.     

纵向激发圆柱体超声频耦合振动的等效线路及其分析

本文利用表观弹性法的理论,得出了圆柱体耦合振动的一种等效线路,讨论了圆柱体耦合振动的频率方程及负载阻抗对振动频率的影响,计算了圆柱振动输入机械阻抗以及径向与纵向表观振速比随其几何尺寸变化的关系曲线.分析及计算结果表明,利用等效线路分析圆柱体的耦合振动,物理意义明显,计算简单,是分析及合理设计圆柱振动体的一种很方便的途径。