Influence of the water molecule on cation-pi interaction: ab initio second order Møller-Plesset perturbation theory (MP2) calculations

The influence of introducing water molecules into a cation-pi complex on the interaction between the cation and the pi system was investigated using the MP2/6-311++G method to explore how a cation-pi complex changes in terms of both its geometry and its binding strength during the hydration. The calculation on the methylammonium-benzene complex showed that the cation-pi interaction is weakened by introducing H(2)O molecules into the system. For example, the optimized interaction distance between the cation and the benzene becomes longer and longer, the transferred charge between them becomes less and less, and the cation-pi binding strength becomes weaker and weaker as the water molecule is introduced one by one. Furthermore, the introduction of the third water molecule leads to a dramatic change in both the complex geometry and the binding energy, resulting in the destruction of the cation-pi interaction. The decomposition on the binding energy shows that the influence is mostly brought out through the electrostatic and induction interactions. This study also demonstrated that the basis set superposition error, thermal energy, and zero-point vibrational energy are significant and needed to be corrected for accurately predicting the binding strength in a hydrated cation-pi complex at the MP2/6-311++G level. Therefore, the results are helpful to better understand the role of water molecules in some biological processes involving cation-pi interactions.     

一种包覆型聚合物高效液相色谱固定相的制备与评价

当代应用最广的HPLC固定相中,硅胶基质填料化学稳定性较低,并且由于残存硅羟基而表现所谓第二效应,特别使碱性化合物的峰形拖尾;聚合物基质填料虽提高了化学稳定性,没有离子基团,但刚性降低,并且由于溶胀难于进行梯度淋洗;面包覆型聚合物填料则可综合二者的优点,本文对我们制备的这种固定相作初步报道。     

SYNTHESIS AND MAGNETISM OF BINUCLEAR COPPER(Ⅱ) COMPLEXES CONTAINING SALUCYLAMIDATOCUPRATE(Ⅱ)

New binuclear copper(Ⅱ) complexes, [Cu(samen)Cu(NO_2-phen)]·H_2O and [Cu(sampn)-Cu(NO_2-phen)]·2H_2O have been synthesized, where samen~(4-), sampn~(4-) and NO_2-phen denote N, N′-ethylenedisalicylamidate anion, N, N′-1, 2-propanedisalicylamidate anion and 5-nitro-1, 10-phenanthroline respectively. 3ased on IR, elemental analyses and electronic spectra, the complexes are proposed to have a phenoxy-bridged structure and to consist of the Cu(Ⅱ)ion in distorted planar environment. The complexes have been characterized with varlable-temperature magnetic susceptibility (4—300 K) and the observed data were fit to those from a modified Bleaney-Bowers equation by least-squares method, giving the exchange integral J=-63.0 cm~(-1) (samen) and J=-46.5cm~(-1) (sampn). This indicates the existence of antiferromagnetic spin exchange interaction among the metal ions.     

动力学体系中双组份的协同效应研究及其分析应用

用停流ＦＩＡ－分光光度法研究了铬（Ⅵ）－碘化钾动力学反应体系中铁(Ⅱ)和钒(Ⅳ)的协同诱导效应，以协同系数（Ｄ）表示二者相互作用程度的大小，在此基础上提出了一种新的动力学双组份同时测定的方法，本法可扩大前述方法的线性范围，并降低检测限，测定了模拟水样品中铁和钒的含量，结果满意。     

钇对2618合金组织及性能的影响

采用X射线，光学显微镜及扫描电镜等手段研究了2618合金中的组织与相结构，并研究了元素钆在2618合金中的存在形式及其对合金力学性能的影响。结果表明，微量钆元素在铝合金中是以化合物形式存在的；钆对合金中的铸态组织及Al9FeNi仃形态没有影响。由于微量钆的加入，降低了铜与镁在2618合金中的固溶量，减少了时效析出相A2CuMg数量，从而降低2618合金的室温强度帮在250℃的高温瞬时强度；但由于微量钆减少了铜与镁在2618合金中的扩散速度，延缓了时效机的粗化，并由于第二相数量的增多，因此提高了2618合金在250℃经100h高温热暴露后的高温瞬时强度。     

钴配合物的合成晶体结构及活性研究

The complex [Co₂Cl₂(EGTB)]·(ClO₄)₂·5H₂O was synthesized in methanol-aqueous solution and its crystal structure was determined by X-ray diffraction method. The crystal belongs to monoclinic with space group of P2₁/c. The cell parameters are a=1.42231(2)nm,b=2.53181(3)nm,c=1.43392(2)nm,β=102.0518(5)°, Z=4, F(000)=2360,D_c=1.508g·cm^-3, The final R=0.0788,wR₂=0.232, The catalytic rate constant of the dismutation of superoxide radicals has been obtained by means of photo reduction of nitroblue tetrazolium(NBT),and it is 1.875×10⁶mol^-1·L·s^-1.     

混合溶剂对磺化聚苯乙烯水基微乳液体系形态的影响

利用相反转技术制备磺化聚苯乙烯(SPS)水基微乳液,研究发现,通过选择溶剂和控制混合溶剂的组成,可制备不同颗粒形态结构的SPS水基微乳液,并研究了相反转过程、乳液稳定性与混合溶剂组成之间的关系。     

亲水性交联聚合物载体的合成表征及其固定化α-淀粉酶

选用丙烯酰胺(AM)、N-羟基琥珀酰亚胺为单体(NHS),以N,N/-亚甲基双丙烯酰胺(MBAA)为交联剂,以乙醇水溶液为制孔剂条件下进行反相悬浮聚合,得到珠状共聚物载体,该载体是一种新的酶载体形式,在国内外的相关文献中均未见报道.用红外光谱、扫描电子显微镜测定其结构和表观活性.结果表明,在固定单体配比[W(AM)/W(NHS)=10∶1]和致孔剂用量的情况下,测得交联剂用量为4%时,交联聚合物载体的溶胀性最好(287.5%);交联剂用量为5%时,交联聚合物载体固定化α-淀粉酶表现出高的表观活性(522.53U/g).测得固定化酶载体表现出良好的操作稳定性.比较固定化酶和游离态酶的最适反应温度发现,固定化酶的最适反应温度(70℃)比游离态酶高20℃;固定化酶的最适反应pH值范围较游离态酶广.     

芳酸及其衍生物的三氯甲基化反应的研究

首次报道了以四氯苯膦为转化剂或采用二氯苯膦与五氯化磷相结合, 将芳酸或芳酰氯转化为三氯甲基芳烃. 同时, 对影响反应的因素进行了研究, 发现连有推电子基的二氯苯膦有促进反应的作用, 而连有吸电子基团则减缓反应的进行, 而反应底物(芳酸或芳酰氯)的结构效应则相反: 连有吸电子基的芳酸有利于反应, 而连有推电子基团则减缓反应的进行. 此外, 发现反应中生成的苯膦酰二氯可作为催化剂重复使用, 并对转化反应的条件进行了改进与优化, 合成出9个三氯甲基芳烃, 其中2个是未见文献报道的新化合物.     

PHOTOSENSITIVITY OF Ce (Ⅳ) INITIATED METHYL ACRYLATE POLYMERIZATION

The influences of UV light irradiation (313 nm) and diffused daylight on the polymerization of methyl acrylate initiated by the ceric ammonium nitrate without any reducing agent have been studied both in aqueous nitric acid and in pure water. The rate of polymerization was found to be accelerated and the overall activation energy and the induction time were found to be decreased sharply by the UV light irradiation. Under UV light, the rate of polymerization is 8 times as high as the rate in dark. The rate of polymerization was found to attain a maximum with the increase of nitric acid concentration and the rate of polymerization became less sensitive to UV light in the presence of nitric acid whereas the induction period reduced outstandingly. Based on the experimental results, the mechanism is proposed.