������΢��ⷽ���Բ�배��㺸����������о�

Based on the structure design and characteristics of the sealing welding of tritium-breeding blanket cap runner, the ultrasonic microscopic detection technology is studied. The testing parameters and the applicability of the method are determined. The JSR DPR500 ultrasonic microscopic detection system is selected to study the testing parameters. The characteristics of the probe parameters and the focus of the sound beam in the ultrasonic microscopy detection are analyzed. Different parameters and water layer thicknesses are used to improve the detection sensitivity. The problem that the small defects in the sealing welding of cap runner are difficult to detect is solved.     

热熔还原法制备超硬复合相氮化碳及其工艺探索

本文采用热熔还原法,以聚氯乙烯、氯化铵、氧化铁为原料制备复合超硬相氮化碳(α/β-C3 N4).采用X射线衍射仪(XRD)、扫描电子显微镜(SEM)以及透射电子显微镜(TEM)对样品进行表征.在此基础上分析了不同温度和原料配比下合成复合相C3 N4的物相组成及形貌变化.结果表明样品形貌随着原料配比的不同在颗粒、棒状、纳米线之间转变.当C、N和Fe之间摩尔比为3:4:0.4时,所制备出的样品呈纳米线状,纳米线的直径约为15 nm,结晶性良好.而在其它配比下,只能获得棒状或颗粒状α/β复合相C3 N4.     

A Novel Acoustic Emission Fiber Optic Sensor Based on a Single Mode Optical Fiber Coupler

Ａｓｗｅｋｎｏｗ ,ａｓｉｎｇｌｅｍｏｄｅｆｉｂｅｒｃｏｕｐｌｅｒｉｓａｓｉｍｐｌｅｂｕｔｖｅｒｙｉｍｐｏｒｔａｎｔｆｉｂｅｒｏｐｔｉｃｄｅｖｉｃｅ ,ｗｈｉｃｈｃａｎｂｅｕｓｅｄｉｎｃｏｍｍｕｎｉｃａｔｉｏｎａｎｄｓｅｎｓｏｒｓ.Ｕｓｉｎｇｓｉｎｇｌｅｍｏｄｅｏｐｔｉｃａｌｆｉｂｅｒｄｅｖｉｃｅｓ,ｗｅｃａｎｆａｂｒｉｃａｔｅｓｅｖｅｒａｌａｃｏｕｓｔｉｃ ｏｐｔｉｃｄｅｖｉｃｅｓ ,ｓｕｃｈａｓｆｒｅｑｕｅｎｃｙｓｈｉｆｔｅｒｓ ,ｍｏｄｕｌａｔｏｒｓａｎｄｔｕｎａｂｌｅｆｉｌｔｅｒｓ .Ｓｅｖｅｒａｌ…     

几种稠环芳烃有机EL材料性能的量子化学理论研究

采用量子化学半经验方法（ＲＨＦ／ＰＭ３）对几种稠环芳烃化合物电致发光（ＥＬ）材料的性质进行了理论研究。利用能量梯度法优化构型,对各优化的构型作振动分析,均未出现虚频率。在此基础上,采用ＲＨＦ／ＣＩＳ方法计算其电子光谱。并给出了化合物ＥＬ１,ＥＬ２电子光谱的最大波长λ与ＣＩＳ组态之间的关系。所有计算结果与实验值基本吻合。     

Synthesis, characterization and magnetism of binuclear cobalt (II) complexes bridged by tetracarboxylato groups

Three new binudear cobalt (II) complexes with extended te-tracarboxylato- bridge have been synthesized and characterized, namely [Co2 (PMTA) (bpy)4] (1), [Co2(PMTA)-(phen)4] (2) and [Co2(PMTA) (NO2phen)4] (3), where PMTA represents the tetraanion of pyroniellitic acid, and bpy, phen, NO2-phen denote 2,2'-bipyridine, 1,10-phenan-throline; 5-nirto-1, 10-plienanthroline, respectively. Based on elemental analyses, molar conductivity measurements, IR and electronic spectra studies, it is proposed that these complexes have PMTA-bridged structures and consist of two cobalt (II) ions, each in a distorted octahedral environment. These complexes were further characterized by variable temperature magnetic susceptibility measurements (4-300 K) and the observed data were successfully simulated by the equation based on the spin Hamiltonian operator, giving the exchange integral J = - 1.02 cm-1 for 1, J = -1.21 cm-1 for 2 and J = - 1.18 cm-1 for 3, respectively. These results revealed the operation of antiferromagneti     

具有生物活性有机硅化合物的研究(XIV)──含硅四配位双(单)硫代磷酸酯化合物的研究

共合成了13个含硅四配位二硫代磷酸酯和2个含硅四配位单硫代磷酸酯的新化合物,经元素分析、IR、¹HNMR、MS确定了新化合物结构,对部分化合物进行了生物活性的测定,结果表明个别化合物有较好的生物活性。     

CeO_2修饰炭载体负载PdPt二元合金催化剂及其在甲酸氧化电催化中的应用

用CeO2修饰炭粉做载体,使用有机溶胶法还原PdPt二元合金的方法制备了一系列PdPt/CeO2-C催化剂.借助电化学测试,探讨催化剂中不同Pd与Pt原子比例的PdPt二元合金和不同含量的CeO2对于甲酸电氧化催化活性的影响.不断减少PdPt合金中Pt的比例可以促使甲酸氧化的起始电位前移,当Pd：Pt=15：1时氧化电流出现极值;同时,随着催化剂中CeO2含量的增加,催化剂对于HCOOH氧化的电流密度增加,当含量为15%时达到最大值.相对于Pd/C催化剂,在Pd15Pt1/15CeO2-C催化剂表面的甲酸氧化反应起始电位负移至少0.1V,氧化的电流密度提高60%以上.结合X射线衍射（XRD）,X射线光电子能谱（XPS）,透射电镜（TEM）和热重（TG）等测试数据可以发现,当极少量的Pt与Pd形成合金,Pt与Pd之间产生电子效应,使得合金表面HCOOH氧化的过电位降低;而CeO2的添加不仅有助于PdPt二元合金的分散,更有可能改变甲酸在PdPt表面的氧化反应路径,发挥双功能机理.     

以改性废旧聚苯乙烯塑料高效减水增强剂为基的早强型水泥高效减水剂的研究

以自己改性合成的改性聚苯乙烯塑料高效减水增强剂为基础 ,利用调配技术 ,与水泥早强剂、普通减水剂复配制备综合性能优良的早强型高效减水剂。研究了配方中各组分对水泥混凝土性能如早期强度、减水率和最终强度的影响     

样品弛豫时间对核磁共振信号的影响研究

研究了不同浓度CuSiO4水溶液样品的核磁共振信号的特点,讨论了在特定的磁场扫场周期下,样品横向弛豫时间对共振信号的影响.发现当样品的横向弛豫时间远远大于扫场周期时,微观磁矩的退相是造成核磁共振信号衰减的主要因素,此时在共振点前后都会形成周期性的振荡信号.     

Acidity Modification of ZSM-5 for Methane Conversion in Co-feeding Method with MTA Reaction

Acidity plays a vital role in methane conversion by co-feeding method, which is one of the best strategies to improve the utilization and gentle the reaction conditions of methane. In this work, Zn, Ni, Mo, La, Ga, Fe and Co-impregnated ZSM-5 zeolites have been prepared with the same substitutions to variate the acidities and tested in co-aromatization of methanol with methane. It is demonstrated that the new medium-strong acid sites formed by metal and strong acid sites are the key role to activate methane in co-reaction. Zn-modified ZSM-5 catalyst is preferred to exhibit the best methane conversion of 12%, whose aromatic selectivity increases from 27.2% to 52.2% compared with that of HZSM-5. Besides, the addition of methane further improves the production of high-valued aromatics compared with methanol to aromatics (MTA) reaction.