儿童易疲劳与血清中微量元素含量的相关性研究

测定了1562名儿童(其中包括153名易疲劳儿童)血清中Zn、Fe、Cu、Ca、Mn和Pb的含量。研究发现,易疲劳儿血清Ca含量(84.4±12.5μg/mL)显著低于对照组儿童(88.5 4±13.4μg/mL),P<0.05;Fe含量(1.094±0.22μg/mL)显著高于对照组儿童(1.07 4±0.22μg/mL),P<0.05;Mn含量(0.040 4±0.035μg/mL)非常显著高于对照组儿童(0.035 4±0.013μg/mL),P<0.001。     

{Cu[H_2NC(CH_2OH)_3]_2}{Pic}_2·H_2O的合成与晶体结构

三羟甲基氨基甲烷与苦味酸(Pic)铜在乙醇水混合液中反应,制得少见的不对称氢键连接的超分子化合物{Cu[H2NC(CH2OH)3]2}{Pic}2?H2O。晶体属三斜晶系,空间群为P ,晶胞参数为a = 6.894(1),b = 8.219(1),c = 13.543(3) ? ?= 79.290(1),?= 8 3.36(2), ?= 84.590(1)埃轿狢20H30CuN8O22,V = 746.9(2) 3,Z = 1,Dc = 1.774 g/cm3,F(000) = 411,?= 0.844 mm-1,R = 0.0334,Rw = 0.0863。在配合物的结构单元中, Cu2+位于对称中心,分别与2个四齿配体(三羟甲基氨基甲烷)中的2个OH,1个NH2,三齿配位,呈笼状螯合。而另一个OH,因配体和中心离子构型的限制,不参与配位。     

铁／锌催化剂的物相结构及其还原行为的穆斯堡尔谱研究

以Mossbauer谱为手段,研究了用于F-T合成的Fe/Zn催化剂的物相结构,并考察了组成及制备方法的影响,同时还对其还原、碳化行为进行了探讨.发现锌对铁的还原有抑制作用,它能够稳定二价铁不被进一步还原.研究还表明,我们所研制的Fe/Zn催化剂是一种高分散度的铁锌化合物,室温下具有超顺磁特性.     

放热型金属合金化对钒基贮氢材料性能影响的理论研究

利用电荷自洽离散变分Xα(SCC-DV-Xα)方法计算了放热型金属合金化对钒基贮氢材料性能的影响。研究结果表明:在钒氢化物V₆₃H₆₄中加入放热型金属后，钒原子的净电荷都减少，而氢原子的净电荷既有增加又有减少，加入Ti、Ca以后，H原子的净电荷减少，而加入Mg、Zr以后，H原子的净电荷增加。研究还表明放热型金属合金化以后，V4s轨道电子态密度峰发生分裂，与H1s和H2s轨道电子态密度重叠程度增大，V-H之间相互作用增强;差分电荷密度还表明M-H之间也有较强的相互作用。Mg合金化导致氢化物V₅₁M₁₂H₆₄的费米能增加，氢化物稳定性减弱;Ca、Ti、Zr合金化导致氢化物V₅₁M₁₂H₆₄的费米能减少，氢化物更稳定。     

硼酸酯偶联剂的合成与表征

通过分子结构设计，合成了一种氮一硼内配位结构的硼酸酯偶联剂，解决了硼酸酯水解稳定性差的问题，同时分子结构中含有氨基、丁氧基等活性基团。用傅立叶变换红外光谱对硼酸酯进行了结构表征，讨论了原料配比、合成工艺等对硼酸酯收率及反应速率的影响，并通过实验确定了最佳配方及工艺。对硼酸酯的物理性能、溶解性、水解稳定性及对硼酸铝晶须的表面处理效果进行了表征。结果表明：合成的硼酸酯偶联剂由于具有氮-硼内配位作用，表现出优良的水解稳定性，并且硼酸酯偶联剂对硼酸铝晶须具有良好的表面改性效果。     

Saframycins 及Ecteinascidins化合物的合成研究进展

综述了两类双四氢异喹啉生物碱Saframycins和Ecteinascidins的合成研究进展. 分析了各合成路线的关键步骤, 部分讨论了各方法的优缺点, 并对其生物合成和作用机理作了简单介绍.     

甲醇在超临界环已烷中形成簇团的Monte Carlo初探

用Ｍｏｎｔｅ Ｃａｒｌｏ方法研究了甲醇－环己烷体系的微观结构随压力（密度）的变化情况，结果表明，在临界区域甲醇分子的聚集最为明显，形成的甲醇团簇尺寸最大，溶剂分子在甲醇周围的局部密度则在低于临界区或亚临界区较大。     

Ab initio study of the complexes of halogen-containing molecules RX (X=Cl, Br, and I) and NH3: towards understanding the nature of halogen bonding and the electron-accepting propensities of covalently bonded halogen atoms

Ab initio calculations have been performed on a series of complexes formed between halogen-containing molecules and ammonia to gain a deeper insight into the nature of halogen bonding. It appears that the dihalogen molecules form the strongest halogen-bonded complexes with ammonia, followed by HOX; the charge-transfer-type contribution has been demonstrated to dominate the halogen bonding in these complexes. For the complexes involving carbon-bound halogen molecules, our calculations clearly indicate that electrostatic interactions are mainly responsible for their binding energies. Whereas the halogen-bond strength is significantly enhanced by progressive fluorine substitution, the substitution of a hydrogen atom by a methyl group in the CH(3)X...NH(3) complex weakened the halogen bonding. Moreover, remote substituent effects have also been noted in the complexes of halobenzenes with different para substituents. The influence of the hybridization state of the carbon atom bonded to the halogen atom has also been examined and the results reveal that halogen-bond strengths decrease in the order HC triple bond CX > H(2)C=CHX approximately O=CHX approximately C(6)H(5)X > CH(3)X. In addition, several excellent linear correlations have been established between the interaction energies and both the amount of charge transfer and the electrostatic potentials corresponding to an electron density of 0.002 au along the R-X axis; these correlations provide good models with which to evaluate the electron-accepting abilities of the covalently bonded halogen atoms. Finally, some positively charged halogen-bonded systems have been investigated and the effect of the charge has been discussed.     

Oxidative coupling of methane over Na-Mn-W/SiO2 catalyst at higher pressure

Na-Mn-W/SiO₂ catalysts were prepared and their catalytic performance for oxidative coupling of methane (OCM) was evaluated in a stainless-steel microreactor at elevated pressure. The results show that a CH₄ conversion of 15.1% with a C₂₊ selectivity of 71.8% was obtained under 750^oC, 1.0×10⁵h^-1 GHSV, CH₄/O₂ ratio of 8 and 1.0 MPa. Moreover, 17.3% CH₄ conversion with 51.6% C₂ selectivity and 23.6% C₃-C₄ selectivity was obtained under 750^oC, 2.0×10⁵h^-1 GHSV, CH₄/O₂ ratio of 8 and 1.0 MPa.     

铬的形态分析研究与进展

综述了Cr(Ⅲ)、Cr(Ⅵ)形态分析的发展。内容包括概述、样品分离富集、光谱分析、色谱分析等。引用文献43篇。