阿基米德螺旋微纳结构中的表面等离激元聚焦

研究光在微纳结构中的分布与传播, 实现在纳米范围内操纵光子, 对于微型光学芯片的设计有着重要意义. 本文利用聚焦离子束刻蚀方法, 在基底为石英玻璃的150 nm厚金膜上刻制了不同参数的阿基米德螺旋微纳狭缝结构, 通过改变入射光波长、手性、及螺旋结构手性和螺距等方式, 在理论和实验上系统地研究了阿基米德螺旋微纳结构中的表面等离激元聚焦性质. 我们发现, 除了入射激光偏振态、螺旋结构手性之外, 结构螺距与表面等离激元波长的比值也可以用来控制结构表面电场分布, 进而在结构中心形成0阶、1阶乃至更高阶符合隐失贝塞尔函数的涡旋电场. 通过相位分析, 我们对涡旋电场的成因进行了解释. 并利用有限时域差分的模拟方法计算了不同螺距时, 结构中形成的电场及相应空间相位分布. 最后利用扫描近场光学显微镜, 观测结构中不同的光场分布, 在结构中心得到了亚波长的聚焦光斑及符合不同阶贝塞尔函数的涡旋形表面等离激元聚焦环.     

磁控溅射制备W掺杂VO2/FTO复合薄膜及其性能分析

为了获得相变温度低且热致变色性能优越的光学材料, 室温下在F:SnO₂ (FTO)导电玻璃基板表面沉积钨钒金属膜, 再经空气气氛下的热氧化处理, 制备了W掺杂VO₂/FTO复合薄膜, 利用X射线光电子能谱、X射线衍射和扫描电镜对薄膜的结构和表面形貌进行了分析. 结果表明: 高温热氧化处理过程中没有生成W, F, V混合氧化物, W以替换V原子的方式掺杂. 与采用相同工艺和条件制备的纯VO₂/FTO复合薄膜相比, W掺杂VO₂薄膜没有改变晶面取向, 仍具有(110)晶面择优取向, 相变温度下降到35 ℃左右, 热滞回线收窄到4 ℃, 高低温下的近红外光透过率变化量提高到28%. 薄膜的结晶程度明显提高, 表面变得平滑致密, 具有很好的一致性, 对光电薄膜器件的设计开发和工业化生产具有重要意义. 关键词： W掺杂 2')" href="#">VO₂ FTO导电玻璃 磁控溅射     

Properties of train traffic flow in a moving block system

The development direction of railways is toward the improvement of capacity and service quality, where the service quality includes safety, schedule, high speed, and comfort. In light of the existing cellular automaton models, in this paper, we develop a model to analyze the mixed running processes of trains with maximal speeds of 500 km/h and 350 km/h respectively in the moving block system. In the proposed model, we establish some sound rules to control the running processes of a train, where the rules include the departure rules in the intermediate stations, the overtaking rules, and the conditions of speed limitation for a train stopping at a station or passing through a station. With the consideration of the mixed ratio and the distance between two adjacent stations, the properties of the train traffic flow (including capacity and average speed) are simulated. The numerical results show that the interactions among different trains will affect the capacity, and a proper increase of the spatial distance between two adjacent stations can enhance the capacity and the average speed under the moving block.     

The population and decay evolution of a qubit under the time-convolutionless master equation

We consider the population and decay of a qubit under the electromagnetic environment. Employing the time-convolutionless master equation, we investigate the Markovian and non-Markovian behaviour of the corresponding perturbation expansion. The Jaynes-Cummings model on resonance is investigated. Some figures clearly show the different evolution behaviours. The reasons are interpreted in the paper.     

基于ANSYS的高温超导混合磁轴承悬浮力分析

基于商用电磁场有限元软件ANSYS以及Bean临界态模型,对由圆柱形高温超导块材、永磁体和超导线圈组成的新型高温超导混合磁轴承的电磁场分布及悬浮力进行了仿真分析,研究了超导线圈对高温超导混合磁轴承悬浮力的影响,同时还通过实验测试了悬浮力。结果表明:仿真与实验具有较好的一致性,使用软件仿真方便可行,其结果较为准确可靠,可为高温超导混合磁轴承的设计和优化提供理论依据。     

铁基磁流化床选择性催化还原烟气脱硝

选择性催化还原(SCR)脱硝是烟气中氮氧化物(NOx)脱除的最有效方法之一,现有SCR系统采用填充床反应器工艺,且催化剂价格较贵.本文以Fe2O3铁基催化剂为床料,以氨为脱硝剂,采用磁流化床进行选择性催化还原脱除氮氧化物实验研究,并对反应前后的床料进行EDAX元素分析和XRD分析.实验结果表明:γ-Fe2O3对加氨SCR脱硝有较强的活性,但随着温度的升高,由于γ-Fe2O3对氨的氧化也表现出较强活性,因而在250°C后,γ-Fe2O3催化剂的脱硝效率会降低;另一方面,磁流化床的良好气固接触与传质特性同时改善了γ-Fe2O3催化剂的上述两个催化活性作用,使其在250°C达到95%的最佳脱硝效率.     

气溶胶单粒子粒径的实时测量方法研究

介绍了近期研制的一台实时测量大气气溶胶单粒子粒径和化学成分的仪器在如何测量气溶胶单粒子粒径方面的测量原理及特点，并结合激光解吸附电离飞行时间质谱技术，利用该仪器对木屑燃烧产生的烟气气溶胶粒子的实时测量结果. 关键词： 气溶胶粒子 空气动力学粒径测量方法 激光解吸附电离 飞行时间质谱     

新型多有源区隧道再生光耦合大功率半导体激光器

针对大功率半导体激光器面临的主要困难,提出并实现了一种隧道再生多有源区耦合大光腔 高效大功率半导体激光器机理.该机理能有效地解决光功率密度过高引起的端面灾变性毁坏 、热烧毁和光束质量差等大功率激光器存在的主要问题.采用低压金属有机化合物气相淀积 方法生长了以碳和硅作为掺杂剂的GaAs隧道结、GaAs/InGaAs 应变量子阱有源区和新型多有 源区半导体激光器外延结构,并制备了高性能大功率980nm激光器件.三有源区激光器外微分 量子效率达2.2,2A驱动电流下单面未镀膜激光输出功率高达2.5W. 关键词： 半导体激光器 大功率 金属有机化合物气相沉积     

Using 1 MHz pulse-echo ultrasound externally applied to detect mastoid effusion: cadaver experiments

The objective of this study is to explore the feasibility of using ultrasound to detect mastoid effusion (ME). In the past, ultrasound has been used to measure middle ear effusion (MEE) by injecting water into the external ear canal to measure echoes from the tympanic membrane, which is uncomfortable for the patient. It has been shown that air cells in the mastoid of patients with MEE are filled with fluid, which implies that ME could be a useful indicator of MEE. This study suggests using ultrasound to detect ME as a potentially noninvasive approach for MEE detection. In vitro experiments were performed on ten cadaver samples of the human ear. A single-element 1 MHz transducer was used to measure the mastoid of each cadaver before and after injecting water into the mastoid. The experimental results showed that the relative amplitudes of ultrasonic signals differed significantly between before (0.24 ± 0.09, mean ± standard deviation) and after (0.15 ± 0.03) the water injection (p < 0.05, t-test), demonstrating that the ultrasonic reflection can be used to detect ME. The location of the human mastoid under the skin behind the ear allows external measurements, and hence ultrasound-based ME detection may be an alternative, noninvasive diagnostic approach to detecting MEE in the future, providing an examination that avoids discomfort.     

量子阱数量变化对InGaN/AlGaN LED的影响

采用软件理论分析的方法分析了InGaN/AlGaN量子阱数量变化对发光二极管内量子效率、电子空穴浓度分布、载流子溢出产生的影响。分析结果表明:量子阱的个数不是越多越好,LED的光学性质和量子阱的个数并不成线性关系。量子阱个数太少时,电流溢出现象较明显;而当量子阱个数太多时,极化现象明显,且会造成材料浪费。因此应根据工作电流选择合适的量子阱个数。