曲轴箱窜气量检测仪的研制

介绍了车用压差式气体流量传感器的结构设计和电测电路，指出了传感器的使用范围，由实验测出了特性曲线．该仪器可检测车用发动机曲轴箱窜气量，适用于发动机不解体故障诊断．     

A classical no-interaction theorem for bosonic strings and its quantum significance

We show that, in dimensions equal or greater than three, classical strings do not join or split. This is part of a no-interaction theorem that is also proved. The quantum theory is considered.     

On the onset of separation in turbulent boundary layer flow over two-dimensional humps of various size

Summary The available laboratory data of turbulent boundary layer flow over two-dimensional obstacles have been examined in order to identify the parameters (such as the aspect ratio or the surface roughness) driving the onset of separation. A comparison with some linearized models suitable for atmospheric applications is also made. It results that i) the model response can be highly sensitive to the detailed shape of the obstacle; ii) the ratio between obstacle length and boundary layer thickness is relevant in determining the pressure perturbation near the surface; iii) the surface shear stress is poorly described in most cases and in particular in the obstacle wake.

---

Riassunto I dati di laboratorio disponibili, relativi a strati limite turbolenti su ostacoli bidimensionali, sono stati esaminati al fine di identificare i parametri guida della separazione (quali la pendenza o la rugosità della superficie). Inoltre è stato fatto un confronto con i risultati di alcuni modelli linearizzati adatti per applicazioni atmosferiche. Ne risulta che i) la risposta del modello è molto sensibile alla forma dettagliata dell’ostacolo; ii) il rapporto fra la lunghezza dell’ostacolo e lo spessore dello strato limite turbolento incidente è importante nel determinare la perturbazione della pressione vicino alla superficie; iii) lo ?shear stress? superficiale non è riprodotto con accuratezza nella maggioranza dei casi, in particolare nella scia dell’ostacolo.

---

Резюме Анализируются имеющиеся лабораторные данные по турбулентному течению в пограничном слое над двумерными препятствиями, чтобы идентифицировать параметры (такие как аспектное отношение или шероховатость поверхности), определяющие возникновение отрыва. Проводится сравнение с некоторыми линеаризованными моделями, удобными для атмосферных приложений. Получены следующие результаты: 1) модельный отклик может быть очень чувствительным к детальной форме препятствия; 2) отношение между длиной препятствия и толщиной поверхностного слоя является существенным при определении возмущения давления вблизи поверхности; 3) напряжение поверхностного сдвига плохо описывается в большинстве случаев и, в частности, в спутной струе.

     

Development of a quantitative FI-MS technique for the characterization of high- and nonboiling saturated hydrocarbon mixtures

Summary Using a saturated non-boiling hydrocarbon mixture, the influence of two parameters on the results of field ionization mass spectrometry (FI-MS) measurements was studied: (a) the potential difference between the FI emitter and the counterelectrode; (b) the emitter temperature.Variation of the potential difference had only a minor effect on the average molecular mass measured and had no evident effect on the relative ring number distribution in the sample. In contrast, when the emitter temperature was increased, higher average molecular masses were recorded. Moreover, the average molecular masses shifted to higher ring numbers. In order to control the relationship between the described influences during mixture analysis, measuring instructions have been developed that enable the quantitative analysis of unknown saturated samples. However, average molecular mass of the mixture must be known.

---

Entwicklung einer quantitativen FI-MS-Methode zur Charakterisierung von gesättigten hoch- und nichtsiedenden Kohlenwasserstoffgemischen

     

New FIR laser lines and frequency measurements for optically pumped CD3OH

Twenty new cw FIR laser lines in CD₃OH, optically pumped by a CO₂ laser, are reported. The frequencies of 39 of the stronger laser lines were measured relative to stabilized CO₂ lasers with a fractional uncertainty, as determined by the reproducibility of the FIR frequency itself, of 2 parts in 10⁷.Contribution of the U.S. Government, not subject to copyright.     

On the stability of Riemannian manifold with parallel spinors

Inspired by the recent work [HHM03], we prove two stability results for compact Riemannian manifolds with nonzero parallel spinors. Our first result says that Ricci flat metrics which also admit nonzero parallel spinors are stable (in the direction of changes in conformal structures) as the critical points of the total scalar curvature functional. Our second result, which is a local version of the first one, shows that any metric of positive scalar curvature cannot lie too close to a metric with nonzero parallel spinor. We also prove a rigidity result for special holonomy metrics. In the case of SU(m) holonomy, the rigidity result implies that scalar flat deformations of Calabi-Yau metric must be Calabi-Yau. Finally we explore the connection with a positive mass theorem of [D03], which presents another approach to proving these stability and rigidity results. Dedicated to Jeff Cheeger for his sixtieth birthday     

Amplifiers and Lasers in PCF Configurations

In this paper we will present an overview of the use of photonic crystal fibers as fiber amplifiers. We will describe the basic concepts of optical amplification, and how to do numerical modelling of such components. We will then identify advantages and disadvantages of amplifiers based on PCF technology compared to conventional fibers, and then go into greater detail on some of these specific applications, such as low pump power amplifiers, and high-power double-clad amplifiers and lasers.     

An Efficient Numerical Model for Planar Spiral Inductor On-Chip

In this paper, a very useful numerical technique has been developed for analyzing the transient characteristics of a planar-spiral inductor on-chip. A locally conformal technique and an alternating-direction implicit scheme are applied to the finite-difference time-domain method. A formulation for solving three dimensional Maxwell’s equations is proposed. Using the proposed method, various parameters of the planar-spiral inductors have been analyzed and an equivalent circuit, which includes frequency-independent circuit elements, has been introduced. Highly computational efficiency is implemented. Numerical results show excellent agreement with the measured data over a wide frequency range.