Evaluation of grinding methods for pellets preparation aiming at the analysis of plant materials by laser induced breakdown spectrometry

It has been demonstrated that laser induced breakdown spectrometry (LIBS) can be used as an alternative method for the determination of macro (P, K, Ca, Mg) and micronutrients (B, Fe, Cu, Mn, Zn) in pellets of plant materials. However, information is required regarding the sample preparation for plant analysis by LIBS. In this work, methods involving cryogenic grinding and planetary ball milling were evaluated for leaves comminution before pellets preparation. The particle sizes were associated to chemical sample properties such as fiber and cellulose contents, as well as to pellets porosity and density. The pellets were ablated at 30 different sites by applying 25 laser pulses per site (Nd:YAG@1064 nm, 5 ns, 10 Hz, 25 J cm⁻²). The plasma emission collected by lenses was directed through an optical fiber towards a high resolution echelle spectrometer equipped with an ICCD. Delay time and integration time gate were fixed at 2.0 and 4.5 μs, respectively. Experiments carried out with pellets of sugarcane, orange tree and soy leaves showed a significant effect of the plant species for choosing the most appropriate grinding conditions. By using ball milling with agate materials, 20 min grinding for orange tree and soy, and 60 min for sugarcane leaves led to particle size distributions generally lower than 75 μm. Cryogenic grinding yielded similar particle size distributions after 10 min for orange tree, 20 min for soy and 30 min for sugarcane leaves. There was up to 50% emission signal enhancement on LIBS measurements for most elements by improving particle size distribution and consequently the pellet porosity.     

Development of a synthetic route towards N4,N9-disubstituted 4,9-diaminoacridines: On the way to multi-stage antimalarials

A multi-step synthetic route towards N⁴,N⁹-disubstituted 4,9-diaminoacridines that, to the best of our knowledge, has no precedence in the literature, has been developed. The target structures are likely to reveal interesting biological activities in the near future, not only due to their mepacrine-like core, but also because they embed simultaneously the pharmacophores of chloroquine and primaquine, antimalarial drugs that act at different stages of malaria infection.     

Use of Cucurbit[6]uril as Ionophore in Ion Selective Electrodes for Etilefrine Determination in Pharmaceuticals

Cucurbiturils are macrocyclic molecules and have been used with promising results in the development of electrochemical sensors and biosensors due to their main properties such as shape, selectivity, binding interactions and solubility. However, its application for the development of ion selective electrodes has been scarce. In this work, cucurbit[6]uril was used as molecular‐recognition compound for etilefrine sensing membrane with potentiometric transduction. The etilefrine selective electrode was evaluated and proposed as an alternative methodology for pharmaceutical quality control. Different membranes composition were evaluated, considering the use of different solvent mediators and the presence of anionic additives. The best membrane comprises 9.24 mmol.Kg^?1 of cucurbit[6]uril, 68.90 % (w/w) of dibutylsebacate and 30.18 % (w/w) of carboxylated polyvinyl chloride. The electrode exhibited selective cationic response toward the etilefrine in a concentration interval of more than four decades, with an slope of 57.4±0.5 mV dec^?1, a practical detection limit of (8±1)×10^?7 mol L^?1 and a low limit of linear range of (1.25±0.28)×10^?6 mol L^?1. The selectivity of the electrode towards different interfering was high. A comparative evaluation of the accuracy and precision of both procedures was done using the t‐student test (t4,12=1.135) and the Fischer test (F12,4=2.42) and compared with the tabulated ones (t4,12=1.135, F11,3=5.91) for the level of confidence of 95 %.     

Characterization of the volatile fraction emitted by Pinus spp. by one- and two-dimensional chromatographic techniques with mass spectrometric detection

The chemical composition of the needles of P. pinea, P. pinaster, P. halepensis, P. nigra, P. brutia, P. patula, P. radiata, P. taeda, P. elliotti, P. kesiya, P. sylvestris and P. eldarica was investigated. Headspace solid-phase microextraction and steam distillation extraction were used to collect the volatile fractions. Samples were analyzed using one-dimensional gas chromatography (1D-GC) and comprehensive two-dimensional gas chromatography (GC × GC) associated with a quadrupole and a time-of-flight mass detectors. Results showed that the analytical capabilities of 1D-GC are partially limited by the separation power of the columns. The higher sensibility and the absence of peak skewing of the time-of-flight mass analyzer, with the use of automated peak finding and deconvolution algorithms, allowed for the detection of trace components with qualitative full spectra and the extraction of true mass spectra from coeluting compounds, promoting their reliable identification and thus significantly improving results obtained by 1D-GC/MS, when using a quadrupole mass analyzer. The use of GC × GC resulted in enhanced separation efficiency and increased signal to noise ratio (sensitivity) of the analytes, maximizing mass spectra quality and improving compound detection and identification. This work shows the use of 1D-GC/ToFMS for the analysis of pine needles volatiles, achieving the detection of 177 compounds, that is more than twice the number previously identified by standard 1D-GC/MS. The analysis by GC × GC for the same sample allowed the detection of 212 compounds. The enantioselective GC × GC analysis performed for all the Pinus spp. under study achieved the detection of 422 different compounds. Cross-over phenomena according to operational conditions are highlighted and discussed.     

Generation and reactivity of 3‐carbethoxy‐5‐phenyl‐5H,7H‐thiazolo[3,4‐c]oxazol‐4‐ium‐1‐olate

3‐Carbethoxy‐5‐phenyl‐5H,7H‐thiazolo[3,4‐c]oxazol‐4‐ium‐1‐olate was generated from (2R,4R)‐N‐ethoxyoxalyl‐2‐phenylthiazolidine‐4‐carboxylic acid and its reactivity studied. This münchnone showed low reactivity as dipole although from the reaction with dimethyl acetylenedicarboxylate the corresponding (3R)‐3‐phenyl‐17H,3H‐pyrrolo[1,2‐c]thiazole‐5,6,7‐tricarboxylate could be isolated. The thermolysis of (2R,4R)‐N‐ethoxyoxalyl‐2‐phenylthiazolidine‐4‐carboxylic acid in refluxing acetic anhydride led to the synthesis of N‐(1‐ethoxycarbonyl‐2‐phenylvinyl)‐2‐phenyl‐4‐thioxo‐1,3‐thiazolidine. The structure of methyl (2R,4R)‐N‐ethoxyoxalyl‐2‐phenylthiazoliddine‐4‐carboxylate was determined by X‐ray crystallography.     

Thermodynamic properties of quinoxaline-1,4-dioxide derivatives: a combined experimental and computational study

The mean (N-O) bond dissociation enthalpies were derived for three 2-methyl-3-(R)-quinoxaline 1,4-dioxide (1) derivatives, with R = methyl (1a), ethoxycarbonyl (1b), and benzyl (1c). The standard molar enthalpies of formation in the gaseous state at T = 298.15 K for the three 1 derivatives were determined from the enthalpies of combustion of the crystalline solids and their enthalpies of sublimation. In parallel, accurate density functional theory-based calculations were carried out in order to estimate the gas-phase enthalpies of formation for the corresponding quinoxaline derivatives. Also, theoretical calculations were used to obtain the first and second N-O dissociation enthalpies. These dissociation enthalpies are in excellent agreement with the experimental results herewith reported.     

Quantitation of glucosamine sulfate in plasma by HPLC-MS/MS after administration of powder for oral solution formulation

A rapid method for the quantification of glucosamine in human plasma using high‐performance liquid chromatography coupled to tandem mass spectrometry was developed and validated. The sample preparation includes a simple deproteinization step, using d ‐[1‐¹³C] glucosamine hydrochloride as an internal standard. Chromatographic separation was performed on an ACE Ciano column using isocratic elution with acetonitrile and aqueous 2 mm ammonium acetate containing 0.025% formic acid (80:20). Selected reaction monitoring was performed using the transitions m/z 180.1 → m/z 72.1 and m/z 181.0 → m/z 74.6 to quantify glucosamine and internal standard, respectively. The method was validated and proved to be linear, accurate and precise over the range 50–5000 ng/mL of glucosamine. Recovery rates higher than 90% were obtained for both glucosamine and internal standard. No matrix effect was detected in the samples. The validated method was successfully applied to a pharmacokinetic study after oral administration of a powder for oral solution formulation containing glucosamine sulfate. Copyright © 2011 John Wiley & Sons, Ltd.     

A metal-free approach to access ketones,amides, and nitriles employing TBAI/TBHP oxidative system in water

Hydrocarbons, benzylamines, and heteroaromatic-bearing amines have been efficiently employed as substrates in allylic and benzylic oxidations via C(sp3)–H bond activation by TBAI/TBHP in water. This operationally simple method allows access to ketones, nitriles, and amides in moderate to high yields and a regio- and chemoselective late-stage functionalization.     

Thermal stability of the PBAT biofilms with cellulose nanostructures/essential oils for active packaging

The primary objective of this study is to evaluate the thermal stability of the active films with the cellulose nanostructure (CNS, 5?mass%) treated with encapsulated essential oils (EOs), eugenol and linalool. CNS untreated and treated were incorporated in the poly(butylene adipate-co-terephthalate) (PBAT) polymer matrix prepared by casting. In this study, all samples were characterized by FTIR, DRX, TG, DSC and SEM, elucidating the contribution of each component in the final films. CNS untreated and treated with EOs were characterized by Fourier transform infrared spectroscopy and thermogravimetric analysis (TGA), confirming the interaction between these components. The active biofilms were analyzed by TGA and DSC analyses (differential scanning calorimetry), confirming that their thermal stability was maintained similar to the neat PBAT film, without loss of properties. The CI (crystallinity index, %) of the polymeric films was calculated from heat fusion (ΔH) values, indicating that the incorporation of the nanostructures into the PBAT matrix increases the crystallinity of the biofilms, from 11.5 (neat PBAT) to 13.8% (PBAT/CNS-E), acting as a nucleating agent in the polymeric matrix. The presence of the EOs did not decrease the CNS stability, as well of the biocomposite films. Moreover, the thermal analysis confirmed that the EO was well involved by the CNS, before and after the incorporation in the PBAT polymer, as observed in the SEM images.