Preparation of an amperometric sensor for norfloxacin based on molecularly imprinted grafting photopolymerization

A sensitive amperometric sensor for norfloxacin (NF) was introduced. The receptor layer was prepared by molecularly imprinted photopolymerization of acrylamide and trimethylolpropane trimethacrylate on the surface of a gold electrode. The binding mechanism of the molecularly imprinted polymer was explored by ultraviolet (UV) and infrared (IR) spectroscopy. The chemosensor was characterized by cyclic voltammetry (CV), differential pulse voltammetry (DPV), electrochemical impedance (EI), and scanning electron microscopy (SEM). The electrode prepared by photopolymerization has a better recognition ability to template molecules than that of electropolymerization and NIP. Some parameters affecting sensor response were optimized. Norfloxacin was detected by measurements of an amperometric i–t curve. The linear relationships between current and logarithmic concentration are obtained from 1.0?×?10^?9 to 1.0?×?10^?3?mol?L^?1. The detection limit of the sensor was 1.0?×?10^?10?mol?L^?1. The proposed method is sensitive, simple, and cheap, and is applied to detect NF in human urine successfully.

Supramolecular organogelators based on Janus type AT nucleosides

J-AT nucleoside-based organogelators 1a and 1b were designed and synthesized. They were endowed with unparalleled superiority to natural nucleobase analogues 2–6 to gelate aromatic solvents due to their excellent self-assembly properties. The J-AT nucleoside-based organogelators showed a specific self-complementary base pair recognition characteristic. The gel stabilities of 1a and 1b were drastically influenced by adenine analogue 2, hardly affected by thymine analogue 3, uracil analogue 4, cytosine analogue 5, and mildly interrupted by guanine analogue 6.     

Ba2Cd(B3O6)2: A Congruent‐Melting Compound with Isolated B3O6 Units

The single crystals of Ba₂Cd(B₃O₆)₂ were grown by the spontaneous crystallization method for the first time. They crystallize in the centrosymmetric trigonal space group R$\bar{3}$ with a = 7.143(3) Å, c = 17.405(16) Å, and Z = 3. The structure is characterized by isolated B₃O₆ units, and the Ba²⁺ and Cd²⁺ cations connect with B₃O₆ rings to form three dimensional structure. The TG/DSC and XRD results reveal that Ba₂Cd(B₃O₆)₂ melts congruently. First‐principles electronic structure calculation performed with the density functional theory (DFT) method shows that the calculated bandgaps are 4.66 eV, which is in good agreement with the UV/Vis/NIR experimental value 4.59 eV. The calculation shows that the Ba₂Cd(B₃O₆)₂ crystal has a large birefringence (Δn = 0.0875–0.0569 from 270 nm to 2600 nm), which demonstrates that Ba₂Cd(B₃O₆)₂ is a potential birefringence crystal.     

铁基分子筛活性位点的制备控制及对NH3-SCR活性的影响

采用离子交换法,通过不同制备条件制备Fe-beta分子筛,并探讨不同制备条件对催化剂活性位点和NH3-SCR活性的影响。通过UV-Vis分析,将不同位置的吸收峰归属于不同的铁活性位点,300nm以下的高能谱区可以归属于孤立的Fe3+位点,300nm-400nm间归属于低聚的FexOy簇,而400nm以上为Fe2O3大颗粒聚合物。对比不同催化剂的SCR活性发现,孤立的Fe3+和低聚态的Fe3+是主要的活性位点,这两种物种的所占比例高低直接影响了催化剂的活性。而大尺度的Fe2O3为非活性位点,因尽量控制并降低其所占比例。另外低聚态的Fe3+所占比例越高,N2O的生成量越高,N2的选择性越差。因此,在制备过程中,除了控制大尺度的Fe2O3的含量,同时要尽量降低低聚态的Fe3+的含量,以增加N2的选择性。采用离子交换法制备Fe-beta催化剂,pH、交换温度、前驱体种类、硅铝比、煅烧条件等制备条件会对Fe-beta的活性位点造成影响,从而导致活性差异。根据实际应用需求,调控制备条件,可有效控制活性物种的分布,制备具有高效NH3-SCR活性的铁基分子筛催化剂。     

Structure and electrochemical performance of LiFePO4 cathode materials modified with carbon coating and metal doping

Journal of Solid State Electrochemistry - LiFePO4 cathode material is considered as a competitive material for lithium-ion battery, but its poor electronic and ionic conductivity hinder its further...     

汉防己甲素全合成研究进展

汉防己甲素是防己科千金藤属植物粉防己中分离提取的双苄基异喹啉类生物碱,已作为临床药物用于抗风湿及阵痛、抗肺癌、抗矽肺。基于粉防己产量的限制及汉防己甲素的需求量增加,深入开展汉防己甲素的全合成研究势在必行。本文按照合成策略,对汉防己甲素的全合成方法进行了综述。      

From borophosphate to fluoroborophosphate: a rational design of fluorine-induced birefringence enhancement

The introduction of oxofluoride anion into anionic group assists to tune optical properties owing to the change of coordination,electronegativity,and according anionic framework.Here,we proposed a rational design of new compounds by fluorine-driven structure and optical property evolution.A new borophosphate Ba_2BP_3O_(11)with the monoclinic space group P2_1/c has been synthesized in the sealed system.Ba_2BP_3O_(11)exhibits a rare P–O–P bridge formation,which is the first example in alkaline-earth metal borophosphates.By further substituting[BO_4]~(3-)with[BO_3F]~(4-),the first alkaline-earth metal/lead fluoroborophosphates M_2BP_2O_8F (M=Ba and Pb) with the same space group were designed.Since the scissors effect of fluorine,in M_2BP_2O_8F (M=Ba and Pb),a BO_3F tetrahedron corner-sharing with three PO_4tetrahedra forms 1D chains along the b-axial direction,which are filled by MO_n(M=Ba/Pb,n=5,6,8) distorted polyhedra.The first principles calculation shows that the borophosphate Ba_2BP_3O_(11)has a birefringence about 0.013@1,064 nm,while the fluoroborophosphates M_2BP_2O_8F (M=Ba and Pb) have the values of 0.035 and 0.043@1,064 nm,respectively.Such an apparent enhancement in birefringence is derived from synergies of the oxyfluoride and cation.The introduction of fluorine-containing heteroanionic groups provides a feasible strategy to design novel promising optical materials.     

超浸润形状记忆海绵的制备及油-水分离性能

基于反式 1,4-聚异戊二烯(TPI)的形状记忆性能, 以聚氨酯海绵为基底, 包覆TPI制备出了一种具有疏水超亲油特性的三维多孔形状记忆海绵. 由于这种海绵具有良好的形状记忆特性, 可以通过反复按压/恢复过程, 实现对海绵孔径在微米尺寸(约875 μm)与纳米尺寸(约450 nm)间可逆调控. 利用材料特殊的浸润特征及其可控的孔尺寸, 进一步研究了其在油-水分离中的应用. 研究结果表明, 微米尺寸大孔径海绵有利于对不相溶油-水混合物进行快速高效分离, 而纳米尺寸小孔径海绵则有利于对乳液混合物进行分离, 实现了同一材料同时满足不相溶油-水混合物及乳液体系的分离要求.     

超薄骨架有序介孔CdS/NiS的制备及光催化产氢性能

采用有序介孔氧化硅为硬模板, 通过纳米浇筑法制备了由螺旋骨架构建的有序介孔硫化镉(CdS)光 催化材料. 该光催化材料具有约5 nm厚的超薄骨架和大的比表面积(238 m²/g), 能有效缩短光催化反应中 光生电荷迁移到表面进行反应的距离并同时提供更多的反应活性位点, 从而增强光催化性能. 通过原位化学沉积法将不同量的助催化剂硫化镍(NiS)沉积到有序介孔CdS表面, 得到了一系列超薄骨架有序介孔CdS/NiS复合光催化材料. 可见光照射下的光催化产氢活性测试结果表明, 负载适量NiS的有序介孔CdS具有显著增强的光催化产氢活性(3.84 mmol?h^-1?g^-1), 约为负载相同量NiS的普通商业化CdS材料(0.22 mmol?h^-1?g^-1)的17.5倍.