Controlled Fabrication of Cd-Bi Nanoparticles via Sonochemical Method

IntroductionMetal or alloy nanoparticles,because of their con-spicuous physicochemical properties,have been widelyapplied to various fields such as electronics,catalysis,magnetism,and corrosion-resistant materialsfields[1—4].It has been estimated that the particle sizeand the properties of nanoparticles depend strongly onthe specific method of fabrication and the applied ex-periment conditions,which makes the controlled syn-thesis of nanomaterials become an increasingly activeand important ar…     

The sonochemical coating of cotton withstands 65 washing cycles at hospital washing standards and retains its antibacterial properties

Hospital-acquired nosocomial infections are a major health, and consequently financial issue, in the world healthcare system. The problem of bacterial infections in general, and in hospitals in particular, has led to extensive scientific and industrial efforts to fabricate antibacterial textiles. A sonochemical coating machine was developed and built and its ability to coat antibacterial nanoparticles (NPs) onto 40–50 meter length of materials on a roll to roll basis at a speed of 22 cm/min. Cotton coated sonochemically with copper oxide nanoparticles (CuO NPs) was found to maintain its antibacterial properties even after 65 cycles of washings according to hospital protocols of hygienic washing (75 °C). This demonstrates the good quality and high stability of this sonochemically produced NPs coating on textiles. Durable antibacterial textiles such as these may be suitable for wide spread use in future hospital environments where hygiene control is of paramount importance.     

Macrocyclic thioether design by molecular modelling

Abstract

Two trithiamacrocycles have been designed by molecular modelling to have preorganised endodentate sulfur donor atoms. These new macrocycles have five- and six-membered saturated heterocycles inserted into 2,5,8-trithia[9]-m-benzenophane; molecular dynamics simulations suggest that the endo forms will be rigid on a nanosecond timescale. Optimum metal-sulfur distances which the new ligands will accommodate lie between 2.76 Å and 2.95 Å, suggesting they will be particularly suitable for a large soft metal ion such as silver(I).     

Ab initio MRD-CI calculations for breaking a chemical bond in a molecule in a crystal or other solid environment. III. Me2N?NO2 decomposition of dimethylnitramine in a large crystalline environment

Recently we extended our strategy for MRD-CI (multireference double excitation-configuration interaction) calculations, based on localized/local orbitals and an “effective” CI Hamiltonian, for molecular decompositions of large molecules to breaking a chemical bond in a molecule in a crystalline or other solid environment. Our technique begins with an explicit quantum chemical SCF calculation for a reference molecule surrounded by a number of other molecules in the multipole environment of more distant neighbors. The resulting canonical molecular orbitals are then localized, and the localized occupied and virtual orbitals in the region of interest are included explicitly in the MRD-CI with the remainder of the occupied localized orbitals being folded into an “effective” CI Hamiltonian. The MRD-CI calculations are then carried out for breaking a bond in the reference molecule. This method is completely general in that the space treated explicitly, as well as the surrounding space, may contain voids, defects, deformations, dislocations, impurities, dopants, edges and surfaces, boundaries, etc. Dimethylnitramine is the smallest prototype of the energetic R₂N—NO₂ nitramines, such as the 6-member ring RDX or the 8-member ring HMX. Decomposition of energetic compounds is initiated in the solid by a breaking of the target bond. Thus, it is crucial to know the difference in energy between breaking a bond in an isolated energetic molecule versus in the molecule in a solid. In the present study, we have carried out MRD-CI calculations for the Me₂N—NO₂ dissociation of dimethylnitramine in a dimethylnitramine crystal. The cases we investigated were one dimethylnitramine molecule (surrounded by 53 and 685 neighboring dimethylnitramine molecules represented by multipoles), three dimethylnitramine molecules, and three dimethylnitramine molecules (surrounded by 683 neighbors). All multipoles were cumulative atomic multipoles up through quadrupoles. The MRD-CI calculations on dimethylnitramine required large numbers of reference configurations from which were allowed all single and double excitations.     

Solid‐state nuclear magnetic resonance investigation of neurosteroid compounds and magnesium interactions

The neurosteroid trans‐dehydroandrosterone (DHEA) and its analogs with slightly different modifications in the side chain attached to C17, that is, (3S)‐acetoxypregn‐5‐en‐20‐one ( 1 ) and (3S,20R)‐acetoxypregn‐5‐en‐20‐ol ( 2 ), have been synthesized to investigate DHEA–cation interactions. In this study, we applied solid‐state ¹H/¹³C cross‐polarization/magic‐angle spinning (CP/MAS) nuclear magnetic resonance (NMR) spectroscopy to a series of DHEA analog/Mg²⁺ mixtures at different Mg²⁺ concentrations. The high‐resolution ¹³C NMR spectra of 1 /Mg²⁺ mixtures exhibit two distinct ¹³C spectral patterns, one attributable to 1 free from Mg²⁺, and the other attributable to 1 with bound Mg²⁺. For 2 , the ¹³C NMR spectra exhibit three distinct spectral patterns; besides that of the free form, the other two can be assigned to Mg²⁺‐bound forms. Based on the analysis of the chemical shift deviations (CSDs), we conclude that both 1 and 2 might be subject to a cation–π interaction via the C5–C6 double bond, in contrast to that observed previously for DHEA. As demonstrated, DHEA possesses two Mg²⁺ binding sites, that is, C17–O and C5–C6 double bond, in which the binding affinity of the former is at least three times stronger than that of the latter. The solid‐state ¹³C NMR investigation allows better understanding of the underlying cation binding effects of neurosteroid molecules in vitro.     

Heterocyclic compounds from 3-(4-phenyl) benzoyl propionic acid

3-(4-Phenyl) benzoyl propionic acid was used as the starting material for the synthesisof furanones (2), pyrrolinones (5), pyridazinones (7), benzoxazinones (8) and quinazolinones (9-11). The behaviour of the derivatives of furanones and benzoxazinones toward different nucleophiles is reported.     

Determination of lead in phosphate ore and phosphogypsum

Laser induced breakdown spectroscopy (LIBS) is applied to analyze aqueous solutions of Li(+), Na(+), Ca(2+), Ba(2+), Pb(2+), Cd(2+), Hg(2+) and Er(3+) and suspensions of ErBa(2)Cu(3)O(x) particles (d=0.2 microm). An excimer (308 nm) pumped dye laser with laser pulse at 500 nm and pulse energy at 22+/-2 mJ is used to produce plasma in aqueous solution. Plasma emission lines of the elements are detected by a photodiode array detector. Detection limits of the metal ions are 500 mg/l for Cd(2+), 12.5 mg/l for Pb(2+), 6.8 mg/l for Ba(2+), 0.13 mg/l for Ca(2+), 13 microg/l for Li(+) and 7.5 microg/l for Na(+). No mercury and erbium emission can be detected, even at Hg(2+) and Er(3+) concentrations of up to the g/l range. On the other side, for Er in suspensions of ErBa(2)Cu(3)O(x) particles a more than 10(3) times higher sensitivity is found than for dissolved Er(3+). This result gives a possibility to analyze colloid-borne metal ions with an increased sensitivity.     

Synthesis and characterization of polyimides with ether linkages

Thermoplastic and thermoset polyimides derived from 2,2-bis[4-(4-aminophenoxy)phenyl]propane (BAPP) and 4,4′-bis(4-aminophenoxy)-2,2′-dimethylbiphenyl (BAPD) were prepared and characterized. Their physical and thermal properties as well as the polyelectrolyte effect exhibited by BTDA–BAPP polyamic acids in NMP solution were discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2559–2567, 1999     

几种乙酸铵离心法测定土壤阳离子交换量的方法探讨

乙酸铵离心交换法测定酸性和中性土壤阳离子交换量是经典方法,但此方法的蒸馏过程繁琐、时间长、效率低。本文引用纳氏试剂分光光度法测定土壤CEC值,并将结果与乙酸铵离心法常用的几种传统测定方法进行了实验对比和总结。通过对国家标准样品及实际土壤样品的CEC值测定,纳氏试剂比色法的精密度在2-4%之间,准确度与经典方法一致。与传统滴定法比较,取代了蒸馏的步骤,测定方法简单,干扰少,结果可靠,可操作性强。     

An open-source approach to automation in organic synthesis: The flow chemical formation of benzamides using an inline liquid-liquid extraction system and a homemade 3-axis autosampling/product-collection device

Several open-source hardware and software technologies (RAMPS, Python, PySerial, OpenCV) were used to control an automated flow chemical synthesis system. The system was used to effect the synthesis of a series of benzamides. An inexpensive Raspberry Pi single board computer provided an electronic interface between the control computer and the RAMPS motor driver boards.