Molecular structures of acetylene derivatives of tin: Part IV. Gas-phase electron-diffraction study of tetraethynyltin,Sn(CCH)4, and triethynyltin iodide,ISn(CCH)3

The geometrical parameters of tetraethynyltin and triethynyltin iodide have been determined by gas-phase electron diffraction. Triethynyltin iodide was present as an admixture in both the tetraethynyltin samples studied. Because the samples differed significantly in percentage of the iodide (17.4 ± 4.0 and 47.1 ± 3.5 mol %, in samples A and B, respectively), it was possible to determine the structures of both molecules to a sufficient degree of accuracy.The r_α, structures were solved by the least-squares treatment of the molecular intensities, using mean amplitudes and shrinkage corrections calculated from the force fields of a number of tin derivatives.The T_d-symmetry model of Sn(CCH)₄ was refined to give the following parameters: Sn-C, 2.068(5); CC, 1.228(8); CH, 1.079(51). The structural parameters for ISn(CCH)₃ (on the basis of the C_3v model with linear Sn-CC-H fragments) are as follows: Sn-I, 2.646(4); Sn-C, 2.062(17); CC, 1.226(6); ∠ISnC 108.0(2.8). (The thermal average bond distances, r_g, are given in Å, and the valence angle, rα, in degrees; the values in paren- theses are three times the standard deviations, 3σ.)The Sn-C bonds in Sn(CCH)₄, and ISn(CCH)₃ are shorter than the corresponding bonds in the monoethynyltin derivatives, Me₃SnCCH and Me₃SnCCSnMe₃. The SnI bond in ISn(CCH)₃ is noticeably shorter than those in stannane iodide and trimethylstannane iodide.     

Non planéité de cyclopenténones substituées analyse conformationnelle par résonance magnétique nucléaire

The stereochemistry of substituted cyclopent-2-en-1-ones was studied by NMR. The existence of non-planar rings is indicated and conformational analysis, based principally upon examination of the coupling constants enables the conformational population to be estimated; trans dihalogeno derivatives, for example, occur predominantly in the diaxial form.     

Synthesis and some properties of gem-dichlorocyclopropane carboxaldehyde acetals and cyclopropane carboxaldehyde acetals

α,β-Unsaturated aldehyde acetals add :CCl₂ (obtained in accordance with Makosza procedure) to form gem-dichlorocyclopropanecarboxaldehyde acetals (1) in high yields when the ratio of reactants is no less than 1:4. The addition of :CCl₂ to polyunsaturated aldehyde acetals in the above conditions proceeds regioselectively at double bonds enriched by electrons. Compounds 1 are reduced by sodium in liquid ammonia to give cyclopropanecarboxaldehyde acetals (2). Both 1 and 2 are hydrolized by dilute H₃P0₄ to the corresponding aldehydes and are added to vinyl ethers in the presence of BF₃·Et₂O to produce only 1:1 adducts which are hydrolyzed by a mixture of AcOH-AcONa-H₂O to give β-formylcyclopropanes which were previously unknown.     

Anionic polymerization of 1,2-butylene oxide

Anionic polymerizations of 1,2-butylene oxide were carried out in vacuum-sealed dilatometers in the range of 30–60°C. Potassium terbutoxide and dimsyl sodium were used as initiators; dimethyl sulfoxide (DMSO) and mixtures of DMSO with tetrahydrofuran were solvents. The polymer products were analyzed by gel permeation chromatography and infrared spectroscopy. The object of the investigation was to obtain information on the mechanism of the reaction and to elucidate some of its kinetic aspects. It has been shown that the polymerizations occur by two different processes, depending on the choice of experimental conditions. One of the processes involves free ions and ion-pairs, the other, ion-pairs alone. In the first case, where dimethyl sulfoxide is used as solvent, the order of the reaction with respect to the initiator concentration far exceeds unity (～1.8), while in the second case, involving mixed solvents, the order of the reaction, for all practical purposes, is one.     

Derivative Dilatometrie

Zusammenfassung Die derivatographische Methode wurde weiterentwickelt. Mit Hilfe einer neuen Einrichtung kann man die Temperatur, die Gewichtsänderung und die Dilatation der Probe sowie auch die Geschwindigkeit der Enthalpie- und Gewichtsänderungen und die Geschwindigkeit der Dilatation messen. Die Vorteile der Einrichtung wurden an einigen praktischen Beispielen erläutert.

---

Summary The derivatographic method was further developed. With the aid of a new apparatus it is possible to measure the temperature, the change in weight and the dilatation of the sample, as well as the velocity of the changes; in enthalpy and weight and the velocity of the dilatation. The advantages of the apparatus were demonstrated by means of several practical examples.

---

Résumé On a élargi le domaine des méthodes dérivatographiques. A l'aide d'un nouveau dispositif, on peut mesurer la température, la variation de poids et la dilatation de l'échantillon, ainsi que la vitesse des changements d'enthalpie et de poids, et aussi la vitesse de la dilatation. On a montré les avantages de ce dispositif sur un certain nombre d'exemples pratiques.

---

---

Bei der Ausführung der Versuche waren uns FrauM. Csonka und FrauE. Borsay behilflich, wofür wir ihnen auch an dieser Stelle danken.     

Guest sorption and desorption in the metal-organic framework [Co(INA)(2)] (INA=isonicotinate)--evidence of intermediate phases during desorption

The metal-organic framework [Co(INA)(2)]x0.5EtOH (INA = isonicotinate, NC(5)H(4)-4-CO(2)(-)), was synthesised under solvothermal conditions. Its X-ray crystal structure shows channels containing ethanol guests which are hydrogen-bonded to carboxylate oxygens of the framework. The pyridyl rings of the framework alternate between 'open' and 'closed' positions along the channels resulting in large variation in the channel cross-sectional area from ca. 1.4 by 2.3 A at the narrowest point to 4.9 by 5.3 A at the widest. Despite the very small windows, the ethanol guests (of van der Waals diameter ca. 4.2-6.1 A) may be reversibly desorbed and sorbed into the structure quantitatively, as shown by in situ variable-temperture IR spectroscopy and XRPD. The single-crystal structure of the desolvated form [Co(INA)(2)] shows that there is no change in the overall connectivity on desolvation, but the rotational positions of the pyridine rings are altered. This suggests that pyridyl rotation may occur to allow guests to pass in and out. When the synthesis was conducted in 1-propanol solvent [Co(INA)(2)]x0.5Pr(n)OHxH(2)O, was obtained, and a single-crystal X-ray structure revealed the same overall connectivity as in but with pyridine rings disordered over closed and open positions. There was no evidence of included guests from X-ray crystallography, suggesting that they are also highly disordered. Variable-temperature XRPD performed on bulk samples showed peaks which were unsymmetrical and exhibited shoulders, suggesting that for each pattern obtained the material actually consisted of several closely-related phases. The movements of the peaks during desolvation showed the presence of intermediate phases before the final desolvated product was formed. The peak positions of the intermediate phases matched more closely with the calculated pattern for than with or, suggesting that they may have disordered structures similar to. The results also suggest that the intermediate phase represents an initial increase in volume before a larger decrease in volume occurs to give the final desolvated material.     

A simplified sampling technique for use with the Weisz ring oven: application to qualitative analysis of some gold and silver alloys

Up to 100 microg of sample can be collected from gold or silver alloys by rubbing the specimen with the ground hemispherical tip of a 4-mm Pyrex glass rod. Gold alloys are then dissolved in potassium cyanide solution containing hydrogen peroxide; silver alloys are exposed to vapours of nitric acid. Procedures for transfer, ring oven separation and identification of alloy constituents in the sample solutions are described.     

Kinetics of solid-state synthesis and properties of lead-containing niobate pyrochlores

The main features of the synthesis of (Pb_1-x Sr_x)₂Nb₂O₇ and (Pb_1-x Ba_x)₂Nb₂O₇ pyrochlore solid solutions were determined using isothermal thermogravimetry in tandem with formal-kinetic analysis. The stability and electron-transport properties of the triple niobates were studied, which allowed us to test them as electrode-active materials for membranes in ion-selective electrodes (ISEs).     

Excess molar enthalpy of binary mixtures of hexane+ethyl benzene, <Emphasis Type="Italic">o</Emphasis>-xylene, <Emphasis Type="Italic">m</Emphasis>-xylene and <Emphasis Type="Italic">p</Emphasis>-xylene at 298.15 K

Summary This paper reports excess molar enthalpies of the binary systems hexane+ethyl benzene, hexane+o-xylene, hexane+m-xylene and hexane+p-xylene at 298.15 K and atmospheric pressure, over the whole composition range. The data was measured directly using a Calvet microcalorimeter. The excess magnitude was correlated to a Redlich-Kister type equation for each mixture. Also, we will discuss the results for the four mixtures studied here and by comparison with the same binary systems but containing propyl propanoate as first component. Finally, we will correlate our results with the Nitta-Chao and the three UNIFAC theoretical approximations.