Reverse micellar synthesis and properties of nanocrystalline GMR materials (LaMnO3, La0.67Sr0.33MnO3 and La0.67Ca0.33MnO3): Ramifications of size considerations

Nanoparticles of complex manganites (viz. LaMnO₃, La_0.67Sr_0.33MnO₃ and La_0.67Ca{0.33}MnO₃) have been synthesized using the reverse micellar route. These manganites are prepared at 800‡C and the monophasic nature of all the oxides has been established by powder X-ray diffraction studies. TEM studies show an average grain size of 68, 80 and 50 nm for LaMnO₃, La_0.67Sr_0.33MnO₃ and La_0.67Ca{0.33}MnO₃respectively. Ferromagnetic ordering is observed at around 250 K for LaMnO₃, 350 K for La_0.67Sr_0.33MnO₃ and 200 K for La_0.67Ca{0.33}MnO₃. These Curie temperatures correspond well with those reported for bulk materials with similar composition.     

Increase of refractive index induced by absorbing centres

An analytical expression of the complex permittivity is derived for absorbing centres featuring inhomogeneous absorption-line broadening. Such an expression gives the dispersion law of the real part of the permittivity when the imaginary part has a Gaussian lineshape. Our mathematical approach starts from an overlap integral of Lorentzian-type dielectric susceptibilities weighted by a Gaussian probability distribution of the resonance absorption energies. The analytical solution found is consistent with the Kramers–Kronig relation. We demonstrate that, like in the case of homogeneous absorption-line broadening, the refractive index increases at photon energies lower than the resonance absorption energy also for inhomogeneous absorption-line broadening; if the absorbing centres emit Stokes-shifted radiation, such an increase can be exploited for passive and active waveguiding applications. An example is reported regarding active waveguides based on colour centres in a lithium fluoride crystal.     

FexNi100−x nanometric films deposited by laser ablation on SiO2/Si substrates

Fe_xNi_100−x nanometric films were deposited on SiO₂/Si substrates at room temperature using the pulsed laser deposition technique. The targets were Fe-Ni amorphous magnetic foils with composition Fe₅₀Ni₅₀, Fe₃₅Ni₆₅ and Fe₂₂Ni₇₈. Morphological and structural properties of the deposited films were investigated using scanning electron microscopy, Rutherford backscattering spectrometry, grazing incidence X-ray diffraction, and X-ray reflectivity. Electrical and magnetic characteristics of the films were investigated by using the four-point probe and the magneto-optic Kerr effect techniques, respectively. The film properties are strictly dependent on the Fe-Ni compositional ratio.     

Synthesis, morphology and random laser action of ZnO nanostructures

Three-dimensional (3-D) ZnO random-wall nanostructures and one-dimensional (1-D) ZnO nanorods were prepared on silicon substrates by a simple solid-vapour phase thermal sublimation technique. Optical pumped random lasing has been observed in the ZnO random-wall arrays with a threshold intensity of 0.38 MW/cm² in the emission wavelength from 380 to 395 nm. The optical gain was attributed to the closed-loop scattering and light amplification of the ZnO random-wall. The experimental result suggests that the morphology of nanostructure is the key factor to effect random lasing.     

Nanostructured polymetallaynes of controlled length: Synthesis and characterization of oligomers and polymers from 1,1′‐bis‐(ethynyl)4,4′‐biphenyl bridging Pt(II) or Pd(II) centers

The reactivity of square planar palladium(II) and platinum(II) complexes in trans or cis configuration, namely trans or cis‐[dichlorobis(tributylphosphine)platinum(II)] and trans‐[dichlorobis(tributylphosphine)palladium(II)] with 1,1′‐bis(ethynyl) 4,4′‐biphenyl, DEBP, leading to π‐conjugated organometallic oligomeric and polymeric metallaynes, was investigated by a systematic variation of the reaction conditions. The formation of polymers and oligomers with defined chain length [? M(PBu₃)₂ (C?C? C₆H₄? C₆H₄? C?C? )]_n (n = 3–10 for the oligomers, n = 20–50 for the polymers) depends on the configuration of the precursor Pt(II) and Pd(II) complexes, the presence/absence of the catalyst CuI, and the reaction time. A series of model reactions monitored by XPS, GPC, and NMR ³¹P spectroscopy showed the route to modulate the chain growth. As expected, the nature of the transition metal (Pt or Pd) and the molecular weight of the polymers markedly influence the photophysical characteristics of the polymetallaynes, such as optical absorption and emission behavior. Polymetallaynes with nanostructured morphology could be obtained by a simple casting procedure of polymer solutions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3311–3329, 2007     

Thickness dependence of free‐standing thin films

Below a critical thickness, of about 60 nm, the glass transition temperature of polystyrene (PS) films decreases with film thickness, as demonstrated using free‐standing films. A geometrical model is developed here describing this phenomenon in the case of ideal (Gaussian) chains. This model, which can be considered as an application of the free volume model, assumes that the decrease of the glass transition temperature from thick to ultrathin films is due to the modification of the interpenetration between neighboring chains. The theoretical curve deduced from the model is in excellent agreement with the PS experimental results, without using any adjustable parameters. From these results, it can be concluded that new chain motions, usually buried in bulk samples, are expressed by the presence of the surface. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 10–17, 2007     

Calculation of polarization aberrations by the method of polarization-wave matrices

The technique of calculation of polarization aberrations with the help of the method of polarizationwave matrices is proposed. Radiation is represented as a coherent set of the Hermitian-Gaussian modes with a certain amplitude, phase, and polarization state; the longitudinal component of the field is also taken into account. Polarization aberrations are considered as a set of spurious modes. Polarization aberrations caused by a cylindrical converging lens and a diaphragm are studied.     

Growth and characterisation of Eu doped GaN thin films

We have studied the optical properties of Eu doped GaN thin films. We have grown high quality Eu doped GaN thin films by using Gas Source Molecular Beam Epitaxy (GSMBE), with 1.4% Eu concentration. The Full Width at Half Maximum (FWHM) of the X-ray diffraction in an omega scan was found to be 288 arcsecs. Low Eu concentration (0.08%) doped GaN thin films were grown, where Eu-related photoluminescence at 622 and 613 nm was detected using above band-gap excitation at 2 K. For high Eu concentration of 30% GaN:Eu crystal photoluminescence (PL) and cathodoluminescence (CL) spectra show strong and intense transitions at 622 and 664 nm, but also at 593 nm for CL spectra, with a similar transition observed from the low Eu concentration sample.     

Decentered twisted Gaussian Schell-model beams and their propagation through a misaligned first-order optical system

The propagation properties of decentered twisted Gaussian Schell-model (DTGSM) beams passing through a misaligned first-order optical system are studied. The explicit expressions for the cross-spectral density function and Wigner distribution function of the output beam are derived, which retain their form unchanged. It is shown that the DTGSM beams preserve their closed property. The second-order moments matrix and the Wigner distribution function evolve with the usual laws, whereas the first-order moments matrix varies, as if a ray passes through such system. The propagation of DTGSM beams through an aligned first-order optical system is treated as the limiting case that corresponds to the vanishing misalignment parameters.     

Determination of Ascorbic Acid by Electrocatalytic Response of an Electrode Coated with Polyvinylpyridine Film and Palladium-Plated

A procedure was developed for analysis of ascorbic acid with a carbon glass electrode coated with a palladium-modified poly(2-vinylpyridine) film.