Polycatenar liquid crystals based on bent-shaped chalcone and cyanopyridine molecules

In this study, the synthesis, structural characterisation and mesomorphic and optical properties of seven new bent-shaped and polycatenar bent-shaped compounds derived from chalcone and cyanopyridine are reported. The mesomorphic behaviour was investigated by differential scanning calorimetry (DSC), polarised optical microscopy (POM) and X-ray diffraction (XRD) and correlated with the molecular structure. Two bent-core hexacatenars molecules (Ic and IIc) presented liquid crystalline properties, showing a hexagonal columnar (Col_h) phases at room temperature, being each disc constituted by two mesogens. Optical studies were also performed for the final molecules, being conducted by ultraviolet-visible and fluorescence spectrometry. The cyanopyridine derivatives show moderate luminescence quantum yields, ranging between 18% and 27%, with emission maxima around 371 nm. It is also shown that while the chalcone central unit favours a calamitic liquid crystalline behaviour in molecules with lower number of aliphatic chains, a polycatenar structure with cyanopyridine as the central unit favours a Col_h arrangement, also providing luminescence properties to the molecule.     

An efficient and computational effective method for second order problems

An efficient and computational effective algorithm is introduced, for the first time in the literature, in the present paper. The main properties of the scheme are: (1) the algorithm is a two-step scheme, (2) the algorithm is symmetric one, (3) it is a hight algebraic order scheme (i.e of eight algebraic order), (4) it is a three-stages algorithm, (5) the first layer of the new method is based on an approximation to the point \(x_{n-1}\), (6) the scheme has vanished phase-lag and its first, second and third derivatives, (7) the new proposed algorithm has an interval of periodicity equal to \(\left( 0, 9.8 \right) \). For the present new scheme we study: (1) its construction, (2) its error analysis (3) its stability analysis. Finally, the investigation of the effectiveness of the new algorithm leads to its application to systems of differential equations arising from the Schrödinger equation.     

On the effectiveness of exponential type orbitals with hyperbolic cosine functions in atomic calculations

Unconventional basis functions, constructed from exponential type orbitals (ETOs) with hyperbolic cosine functions, are applied to Roothaan-Hartree-Fock calculations of atoms within the minimal basis sets framework. The most popular ETOs, Slater type orbitals, B functions and \(\psi ^{(\alpha ^*)}\) functions with \(\alpha ^*=2\), and two types of hyperbolic cosine functions, \(\cosh (\beta r)\) and \(\cosh (\beta r+\gamma )\), are used in this work. The performance of the present basis functions is investigated and compared to the conventional double-zeta Slater-type basis set and numerical Hartree-Fock results. The improvement in the atomic energies clearly demonstrates how the accuracy increases when we move from ETO to ETO with hyperbolic cosine basis functions. The resulting improved minimal basis sets can also be useful in molecular calculations.     

Investigation of Cold Atmospheric Plasma-Activated Water for the Dental Unit Waterline System Contamination and Safety Evaluation in Vitro

The disinfection of the inner surface of a medical device has long been a challenge for the central sterile supply departments. Dental unit waterline system (DUWLs) foster the attachment of microorganisms and development of biofilm, which lead to continuous contamination of the outlet water from dental units; this contamination may be responsible for a potential risk of infection due to the exposure of patients and medical staff. The present study investigated the disinfection effects of cold atmospheric plasma-activated water (CAPAW) on DUWLs using a model of 5-day-old Enterococcus faecalis biofilm. The results showed that the colony-forming unit was reduced from 10⁷ to 0 after 5 min of treatment. The physicochemical properties of CAPAW were evaluated, including the pH value, oxidation reduction potential, and NO radical. The results showed that the inactivation mechanisms were mainly triggered by the reactive oxygen/nitrogen species. Additionally, CAPAW had a metal corrosion rate same as that of deionized water. We conclude that CAPAW can be applied as an appropriate alternative disinfectant against biofilm contamination of DUWLs.     

A Study of the Influence of the Surrounding Gas on the Plasma Jet and Coating Quality During Plasma Spraying

Coating quality is affected by arc and plume instabilities during plasma spraying. In closed chamber plasma spraying, gradual drift is one of the intermediate instabilities, which is mainly due to the electrode erosion. This work focuses on the source of the gradual drift of the plasma jet and the influence on coating quality. The ambient state inside the chamber was controlled by a ventilation system and a vacuum system. The variation in the plasma jet was observed by a particle flux image device based on a CCD camera. The optical spectrum of the plasma plume was measured and analyzed through an optical spectrometer. The results indicated that the addition of hydrogen to plasma gas induced the change in the plasma jet length and width with changing rates depending on the chamber state and the ventilation power. With poor ventilation, the intensity of H_α emission was found to become gradually stronger while H_β and H_γ were found to become weaker. On closing the chamber and retaining enough ventilation power, it was observed that the ambient gas slowly turned red. Simultaneously, the coating weight and thickness were slightly decreased meanwhile the porosity ratio was obviously increased. The red ambient gas has been proved to be able to acidify the city water with pH value decreased from 7 to 1–3. Without hydrogen, the plasma jet was found to be stable without reddening and variation, but the plasma enthalpy was unfortunately low.     

High-Performance Biogas Upgrading Using a Biotrickling Filter and Hydrogenotrophic Methanogens

This research reports the development of a biotrickling filter (BTF) to upgrade biogas, which is achieved by adding H₂ to reduce CO₂. H₂ and CO₂ (80:20% vol.) were fed to a bench-scale BTF packed with polyurethane foam (PUF) and inoculated with hydrogenotrophic methanogens. Maximum CH₄ production rates recorded were as high as 38 m³ _CH4 m^?3 _reactor day^?1, which is 5–30 times faster than earlier reports with other kinds of bioreactors. The high rates were attributed to the efficient mass transfer and high density of methanogens in the BTF. The removal efficiencies for H₂ and CO₂ were 83 and 96%, respectively. 5-Cyano-2,3-ditolyl tetrazolium chloride/DAPI staining revealed that 67% of cells were alive near the gas entrance port, while only 8.3% were alive at the exit. Furthermore, DNA sequencing showed that only 27% of the biomass was composed of Euryarchaeota, the phylum which includes methanogens. These two observations suggest that optimizing the methanogen density and activity could possibly reach even higher biogas upgrading rates.     

Fluorene-containing tetraphenylethylene molecules as lasing materials

A series of star-shaped oligofluorene molecules, each containing a TPE core, have been specifically designed and produced to show effective aggregation-induced emission (AIE). Each molecule differs either in the number of fluorene units within the arms (e.g., 1 or 4, compounds 4 and 5 ), or the terminal group positioned at the end of each arm (e.g., H, TMS, or TPA, compounds 4 , 6 , and 7 ). Although they are all poor emitters in solution phase they become efficient yellow-green luminogens in the condensed state. Their AIE properties were investigated in THF/H₂O mixtures, with each molecule exhibiting a clear emission enhancement at specific water contents. An all-organic distributed feedback (DFB) laser was fabricated using compound 4 as the gain material and exhibited an average threshold energy fluence of 60 ± 6 μJ/cm² and emission in the green region. Furthermore, piezofluorochromism studies on a thin film of this material displayed a linear dependence of the amplified spontaneous emission (ASE) peak position on applied pressure, indicating potential applications as lasing-based pressure sensors. © 2016 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 734–746     

Method validation in analytical sciences: discussions on current practice and future challenges

Accreditation and Quality Assurance - Eurachem held a workshop on method validation in analytical sciences in Gent, Belgium, on 9–10 May 2016. A summary of the working group discussions is...     

Uncatalyzed synthesis of new substituted dihydro-2H-dipyrimido[1,2-a,4,5-d]pyrimidine-2,4(3H)-dione

Research on Chemical Intermediates - A convenient and new method has been developed for the synthesis of highly substituted dihydro-2H-dipyrimido[1,2-a,4,5-d]pyrimidine-2,4(3H)-dione derivatives by...     

On parallel Branch and Bound frameworks for Global Optimization

Branch and Bound (B&B) algorithms are known to exhibit an irregularity of the search tree. Therefore, developing a parallel approach for this kind of algorithms is a challenge. The efficiency of a B&B algorithm depends on the chosen Branching, Bounding, Selection, Rejection, and Termination rules. The question we investigate is how the chosen platform consisting of programming language, used libraries, or skeletons influences programming effort and algorithm performance. Selection rule and data management structures are usually hidden to programmers for frameworks with a high level of abstraction, as well as the load balancing strategy, when the algorithm is run in parallel. We investigate the question by implementing a multidimensional Global Optimization B&B algorithm with the help of three frameworks with a different level of abstraction (from more to less): Bobpp, Threading Building Blocks (TBB), and a customized Pthread implementation. The following has been found. The Bobpp implementation is easy to code, but exhibits the poorest scalability. On the contrast, the TBB and Pthread implementations scale almost linearly on the used platform. The TBB approach shows a slightly better productivity.